|本期目录/Table of Contents|

[1]赵恩彪.采煤工作面粉尘浓度分布及传感器的部署[J].中国安全生产科学技术,2012,8(11):85.
　ZHAO En biao.Study on concentration of dust distribution and deployment of sensor in coal mining face[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2012,8(11):85.
点击复制

采煤工作面粉尘浓度分布及传感器的部署
分享到：

《中国安全生产科学技术》[ISSN:1673-193X/CN:11-5335/TB]

卷:
8
期数:
2012年11期
页码:
85
栏目:
出版日期:
2012-11-30

文章信息/Info

Title:
Study on concentration of dust distribution and deployment of sensor in coal mining face
作者:
赵恩彪1; 2
（l. 中煤科工集团 重庆研究院，重庆〓400037) (2 重庆大学 资源及环境科学学院, 重庆〓400030）
Author(s):
ZHAO En biao 1; 2
(1 China Coal Research Institute of Science and Industry Group, Chongqing 400037, China) (2 College of resources and environmental science of Chongqing University, Chongqing 400030, China)
关键词:
粉尘浓度; 传感器; 综采工作面; Fluent
Keywords:
dust concentration;  sensor;  fully-mechanized mining face;  fluent
分类号:
X936
DOI:
-
文献标志码:
A
摘要:
为给煤矿井下采煤工作面上粉尘浓度传感器的安放位置提供理论依据，建立了回采工作面巷道几何模型，根据气体、尘粒运动方程和欧拉-拉格朗日方法中的离散相模型，采用Fluent软件仿真井下采煤工作面及回风巷粉尘浓度的分布情况。仿真结果表明：粉尘在司机后方10-20m处粉尘浓度达到最大，在司机30m后趋于稳定，粉尘传感器应放置在回风巷距综采工作面的距离小于或等于10m的位置
Abstract:
In order to provide a theoretical basis for the deployment posistion of dust concentration sensors in working face of coal mine, the geometry model of mining face roadway was established. Based on the protion equations of gases and dusts, and the discete phase model in the Euler-Lagrange method, the distribution conditions of dust in the underground mining face and return airway were simulated by fluent. The results showed that: the dust concentration reaches the maximum ralue at the position of 10-20m behind the driver, and it tends to be stabilized at the position of 30m the sensors of dust should be placed in the position of less than or equal to 10m from the fully-mechanized mining face of the return airway.

参考文献/References:

-

相似文献/References:

[1]王晓珍.煤巷掘进过程中粉尘浓度影响因素分析[J].中国安全生产科学技术,2011,7(4):75.
　WANG Xiao-zhen.Anlysis of dust concentration influence factor in coal roadway driving[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2011,7(11):75.
[2]刘剑,李雪冰,高科,等.井巷风速单点测试方法及其可行性研究[J].中国安全生产科学技术,2016,12(8):23.[doi:10.11731/j.issn.1673-193x.2016.08.004]
　LIU Jian,LI Xuebing,GAO Ke,et al.Study on single-point measurement method of roadway air velocity and its feasibility[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2016,12(11):23.[doi:10.11731/j.issn.1673-193x.2016.08.004]
[3]高康宁,蒋仲安,陈记合,等.冲压车间打磨区粉尘分布规律数值模拟与实测[J].中国安全生产科学技术,2018,14(4):181.[doi:10.11731/j.issn.1673-193x.2018.04.028]
　GAO Kangning,JIANG Zhongan,CHEN Jihe,et al.Numerical simulation and measurement of dust distribution in grinding area of stamping shop[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2018,14(11):181.[doi:10.11731/j.issn.1673-193x.2018.04.028]
[4]赵一姝,范健强,白建平,等.粉尘浓度对20 L球罐内硫磺粉尘分散过程流场特性的影响[J].中国安全生产科学技术,2018,14(7):48.[doi:10.11731/j.issn.1673-193x.2018.07.007]
　ZHAO Yishu,FAN Jianqiang,BAI Jianping,et al.Influence of dust concentration on flow field characteristics of sulfur dust during dispersion process in 20L spherical tank[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2018,14(11):48.[doi:10.11731/j.issn.1673-193x.2018.07.007]
[5]林浩宇,蒋仲安,杨斌,等.组合式通风打磨台风量对粉尘控制效果的影响[J].中国安全生产科学技术,2018,14(11):160.[doi:10.11731/j.issn.1673-193x.2018.11.026]
　LIN Haoyu,JIANG Zhongan,YANG Bin,et al.Influence of air volume on dust control effect for combined ventilation grinding table[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2018,14(11):160.[doi:10.11731/j.issn.1673-193x.2018.11.026]
[6]张守鑫,杨博,周川,等.滤毒罐寿命失效指示器的研究进展[J].中国安全生产科学技术,2019,15(8):51.[doi:10.11731/j.issn.1673-193x.2019.08.008]
　ZHANG Shouxin,YANG Bo,ZHOU Chuan,et al.Research progress on endofservicelife indicator for canisters[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2019,15(11):51.[doi:10.11731/j.issn.1673-193x.2019.08.008]
[7]李刚,王运敏,金龙哲.金属矿山掘进巷道新型通风除尘系统研究与应用[J].中国安全生产科学技术,2019,15(8):77.[doi:10.11731/j.issn.1673-193x.2019.08.012]
　LI Gang,WANG Yunmin,JIN Longzhe.Research and application of new ventilation and dust removal system in tunneling roadway of metal mine[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2019,15(11):77.[doi:10.11731/j.issn.1673-193x.2019.08.012]
[8]曾思敏,林龙沅,康菲菲,等.直通导叶式微型旋流管组分离效率实验[J].中国安全生产科学技术,2019,15(10):101.[doi:10.11731/j.issn.1673-193x.2019.10.016]
　ZENG Simin,LIN Longyuan,KANG Feifei,et al.Experiments on separation efficiency of micro swirling tube group with straightthrough leafguided type[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2019,15(11):101.[doi:10.11731/j.issn.1673-193x.2019.10.016]

备注/Memo

备注/Memo:
-
更新日期/Last Update: 2012-11-30