|本期目录/Table of Contents|

[1]普会杰,刘韬,刘畅,等.基于流形学习的旋转设备故障诊断方法*[J].中国安全生产科学技术,2023,19(8):209-216.[doi:10.11731/j.issn.1673-193x.2023.08.030]
 PU Huijie,LIU Tao,LIU Chang,et al.Fault diagnosis method of rotating equipment based on manifold learning[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2023,19(8):209-216.[doi:10.11731/j.issn.1673-193x.2023.08.030]
点击复制

基于流形学习的旋转设备故障诊断方法*
分享到:

《中国安全生产科学技术》[ISSN:1673-193X/CN:11-5335/TB]

卷:
19
期数:
2023年8期
页码:
209-216
栏目:
职业安全卫生管理与技术
出版日期:
2023-08-31

文章信息/Info

Title:
Fault diagnosis method of rotating equipment based on manifold learning
文章编号:
1673-193X(2023)-08-0209-08
作者:
普会杰12刘韬12刘畅12周俊12缪护3
(1.昆明理工大学 机电工程学院,云南 昆明 650500;
2.昆明理工大学 云南省先进装备智能制造技术重点实验室,云南 昆明 650500;
3.昆明云内动力股份有限公司,云南 昆明 650500)
Author(s):
PU Huijie12 LIU Tao12 LIU Chang12 ZHOU Jun12 MIAO Hu3
(1.Faculty of Mechanical and Electrical Engineering,Kunming University of Science and Technology,Kunming Yunnan 650500,China;
2.Key Laboratory for Advanced Equipment Intelligent Manufacturing Technology of Yunnan Province,Kunming University of Science and Technology,Kunming Yunnan 650500,China;
3.Kunming Yunnei Power Co.,Ltd.,Kunming Yunnan 650500,China)
关键词:
故障诊断设备安全变工况迁移学习流形学习
Keywords:
fault diagnosis equipment safety variable working condition transfer learning manifold learning
分类号:
TH17X941
DOI:
10.11731/j.issn.1673-193x.2023.08.030
文献标志码:
A
摘要:
为解决变工况条件下源域样本和目标域样本分布差异导致不同域样本特征动态变化明显以及诊断准确率较低的问题,提出1种基于流形学习的测地流核函数(geodesic flow kernel,GFK)域自适应故障诊断方法,该方法在格拉斯曼流形中构造测地流式核,将频域特征转换为与故障信息相关的固有流形特征,减小源域与目标域在特征空间上的分布差异。研究结果表明:所提方法的平均诊断准确率较KNN、SAE、SA、CORAL方法在滚动轴承上分别提高24.98,12.18,8.14和6.36个百分点,在RV减速器行星轮上分别提高31.38,20.55,20.25和22.19个百分点,在齿轮上分别提高62.71,46.05,51.34和43.84个百分点,可有效提高不同旋转设备变工况条件下的诊断准确率。研究结果可为变工况条件下的旋转设备故障诊断研究提供参考。
Abstract:
In order to solve the problem that the distribution difference of samples in source domain and target domain under variable working conditions will lead to obvious dynamic change in the characteristics of samples in different domains and low diagnosis rate,an adaptive fault diagnosis method of geodesic flow kernel (GFK) function domain based on manifold learning was proposed.The geodesic flow kernel was constructed in the Glasman manifold,and the frequency domain features were converted into the inherent manifold features related to fault information,which reduced the distribution difference between the source domain and the target domain in the feature space.The results show that compared with KNN,SAE,SA and CORAL methods,the average accuracy of the proposed method is increased 24.98,12.18,8.14 and 6.36 percentage points respectively for rolling bearing,and 31.38,20.55,20.25 and 22.19 percentage points for RV reducer planetary wheel,respectively.In the gear,the improvement is 62.71,46.05,51.34 and 43.84 percentage points,respectively,and the diagnostic accuracy of rotating equipment under different working conditions is improved effectively.The research results can provide reference for the research on fault diagnosis of the rotating equipment under variable working conditions.

参考文献/References:

[1]HE Z J,CHEN J,WANG T Y,et al.Theory and application of mechanical fault diagnosis[M].Beijing:Higher Education Press,2010.
[2]COLLACOTT R.Mechanical fault diagnosis and condition monitoring[M].Berlin:Springer Science & Business Media,2012.
[3]周启超,刘剑,刘丽,等.基于SVM的通风系统故障诊断惩罚系数与核函数系数优化研究[J].中国安全生产科学技术,2019,15(4):45-51.ZHOU Qichao,LIU Jian,LIU Li,et al.Research on fault diagnosis penalty coefficient and kernel function coefficient optimization of ventilation system based on SVM[J].Journal of Safety Science and Technology,2019,15(4):45-51.
[4]杨波,黄倩,付强,等.基于CEEMD和优化KNN的离心泵故障诊断方法[J].机电工程,2022,39(11):1502-1509.YANG Bo,HUANG Qian,FU Qiang,et al.Fault diagnosis method for horizontal centrifugal pumpbased on CEEMD and optimized KNN[J].Journal of Mechanical & Electrical Engineering,2022,39(11):1502-1509.
[5]倪景峰,李振,乐晓瑞,等.基于随机森林的阻变型通风网络故障诊断方法[J].中国安全生产科学技术,2022,18(4):34-39.NI Jingfeng,LI Zhen,LE Xiaorui,et al.Resistance variant fault diagnosis method of ventilation network based on random forest[J].Journal of Safety Science and Technology,2022,18(4):34-39.
[6]陈超,沈飞,严如强.改进LSSVM迁移学习方法的轴承故障诊断[J].仪器仪表学报,2017,38(1):33-40.CHEN Chao,SHEN Fei,YAN Ruqiang.Enhanced least squares support vector machine-based transfer learning strategy for bearing fault diagnosis[J].Chinese Journal of Scientific Instrumen,2017,38(1):33-40.
[7]LI X,ZHANG W,DING Q.A robust intelligent fault diagnosis method for rolling element bearings based on deep distance metric learning[J].Neurocomputing,2018,310:77-95.
[8]WANG X G,REN J,LIU S.Distribution adaptation and manifold alignment for complex processes fault diagnosis[J].Knowledge-Based Systems,2018,156:100-112.
[9]WU Z H,JIANG H K,ZHAO K,et al.An adaptive deep transfer learning method for bearing fault diagnosis[J].Measurement,2020,151:107227.
[10]ZHANG L,GUO L,GAO H L,et al.Instance-based ensemble deep transfer learning network:a new intelligent degradation recognition method and its application on ball screw [J].Mechanical Systems and Signal Processing,2020,140:106681.
[11]WANG X G,JIE R L,LIU S.Distribution adaptation and manifold alignment for complex processes fault diagnosis[J].Knowledge Based Systems,2018,156:100-112.
[12]HAN T,LIU C,YANG W G,et al.Deep transfer network with joint distribution adaptation:a new intelligent fault diagnosis framework for industry application[J].ISA Transactions,2020,97:269-281.
[13]刘建伟,孙正康,罗雄麟.域自适应学习研究进展 [J].自动化学报,2014,40(8):1576-1600.LIU Jianwei,SUN Zhengkang,LUO Xionglin.Review and research development on domain adaptation learning[J].Acta Automatica Sinica,2014,40(8):1576-1600.
[14]BAKTASHMOTLAGH M,HARANDI M T,LOVELL B C,et al.Unsupervised domain adaptation by domain invariant projection[C]//Proceedings of the IEEE International Conference on Computer Vision.2013:769-776.
[15]BAKTASHMOTLAGH M,HARANDI M T,LOVELL B C,et al.Domain adaptation on the statistical manifold[C]//Proceedings of the IEEE Conference on Computer Vision and Pattern Recognition.2014:2481-2488.
[16]GONG B,SHI Y,SHA F,et al.Geodesic flow kernel for unsupervised domain adaptation[C]//2012 IEEE Conference on Computer vision and Pattern Recognition.IEEE,2012:2066-2073.
[17]GOPALAN R,LI R,CHELAPPA R.Domain adaptation for object recognition:an unsupervised approach[C]//2011 International Conference on Computer Vision.IEEE,2011:999-1006.
[18]SAMAT A,GAMBA P,ABUDUWAILI J,et al.Geodesic flow kernel support vector machine for hyperspectral image classification by unsupervised subspace feature transfer[J].Remote Sensing,2016,8(3):234.
[19]LOPARO K A.Bearing vibration data set [D].Cleveland:Case Western Reserve University,2003.
[20]SUN J D,YAN C H,WEN J T.Intelligent bearing fault diagnosis method combining compressed data acquisition and deep learning[J].IEEE Transactions on Instrumentation and Measurement,2018,67(1):185-195.
[21]刘海宁,宋方臻,窦仁杰,等.小数据条件下基于测地流核函数的域自适应故障诊断方法研究[J].振动与冲击,2018,37(18):36-42.LIU Haining,SONG Fangzhen,DOU Renjie,et al.Domain adaptive fault diagnosis based on the geodesic flow kernel under small data condition[J].Journal of Vibration and Shock,2018,37(18):36-42.
[22]段在鹏,李帆,邱少辉,等.地铁沿线老旧房屋结构安全预警模型[J].中国安全生产科学技术,2022,18(3):162-167.DUAN Zaipeng,LI Fan,QIU Shaohui,et al.Early warning model for structural safety of old buildings along metro lines[J].Journal of Safety Science and Technology,2022,18(3):162-167.
[23]谢学斌,王小平,刘涛.基于ICEEMDAN和MC-CNN的矿山声发射信号识别分类方法[J].中国安全生产科学技术,2022,18(2):113-118.XIE Xuebin,WANG Xiaoping,LIU Tao.Recognition and classification methods of mine acoustic emission signals based on ICEEMDAN and MC-CNN[J].Journal of Safety Science and Technology,2022,18(2):113-118.
[24]韩特,李彦夫,雷亚国,等.融合图标签传播和判别特征增强的工业机器人关键部件半监督故障诊断方法[J].机械工程学报,2022,58(17):116-124.HAN Te,LI Yanfu,LEI Yaguo,et al.Semi-supervised fault diagnosis method via graph label propagation and discriminative feature enhancement for critical components of industrial robot[J].Journal of Mechanical Engineering,2022,58(17):116-124.

相似文献/References:

[1]李佃祥,于洪国,周江涛.油管静水试压装置安全控制系统设计与开发[J].中国安全生产科学技术,2012,8(12):103.
 LI Dian xiang,YU Hong guo,ZHOU Jiang tao.Design and development of safe control system of tubing hydraulic pressure experiment equipment[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2012,8(8):103.
[2]马成正.基于概率神经网络的液氨汽车罐车复合故障诊断[J].中国安全生产科学技术,2011,7(3):114.
 MA Cheng-zheng.Compound Fault Diagnosis of Liquid Ammonia Tank Car Based on Probabilistic Neural Network[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2011,7(8):114.
[3]雷雨,吴超,王秉.人对声信号的安全认知模型构建及其应用[J].中国安全生产科学技术,2018,14(6):27.[doi:10.11731/j.issn.1673-193x.2018.06.004]
 LEI Yu,WU Chao,WANG Bing.Construction and application of safety cognition model for human to acoustic signals[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2018,14(8):27.[doi:10.11731/j.issn.1673-193x.2018.06.004]
[4]刘剑,刘丽,黄德,等.基于风量-风压复合特征的通风系统阻变型故障诊断[J].中国安全生产科学技术,2020,16(1):85.[doi:10.11731/j.issn.1673-193x.2020.01.014]
 LIU Jian,LIU Li,HUANG De,et al.Resistance variant fault diagnosis of ventilation system based on composite features of air volume and air pressure[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2020,16(8):85.[doi:10.11731/j.issn.1673-193x.2020.01.014]
[5]潘伟,徐刚,熊方杰.基于非线性技术锅炉故障分析*[J].中国安全生产科学技术,2020,16(12):176.[doi:10.11731/j.issn.1673-193x.2020.12.028]
 PAN Wei,XU Gang,XIONG Fangjie.Analysis of boiler fault based on nonlinear technology[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2020,16(8):176.[doi:10.11731/j.issn.1673-193x.2020.12.028]
[6]倪景峰,乐晓瑞,常立峰,等.基于决策树的矿井通风阻变型故障诊断及传感器优化布置*[J].中国安全生产科学技术,2021,17(2):34.[doi:10.11731/j.issn.1673-193x.2021.02.005]
 NI Jingfeng,LE Xiaorui,CHANG Lifeng,et al.Resistance variant fault diagnosis and optimized layout of sensors for mine ventilation based on decision tree[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2021,17(8):34.[doi:10.11731/j.issn.1673-193x.2021.02.005]
[7]张瑞程,王新颖,胡磊磊,等.基于一维卷积神经网络的燃气管道泄漏声发射信号识别*[J].中国安全生产科学技术,2021,17(2):104.[doi:10.11731/j.issn.1673-193x.2021.02.016]
 ZHANG Ruicheng,WANG Xinying,HU Leilei,et al.Acoustic emission signal identification of gas pipeline leakage based on one-dimensional convolution neural network[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2021,17(8):104.[doi:10.11731/j.issn.1673-193x.2021.02.016]
[8]倪景峰,李振,乐晓瑞,等.基于随机森林的阻变型通风网络故障诊断方法*[J].中国安全生产科学技术,2022,18(4):34.[doi:10.11731/j.issn.1673-193x.2022.04.005]
 NI Jingfeng,LI Zhen,LE Xiaorui,et al.Resistance variant fault diagnosis method of ventilation network based on random forest[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2022,18(8):34.[doi:10.11731/j.issn.1673-193x.2022.04.005]
[9]付敏,郝镒林,李萌,等.安全工程技术领域数字孪生应用研究综述*[J].中国安全生产科学技术,2022,18(4):243.[doi:10.11731/j.issn.1673-193x.2022.04.035]
 FU Min,HAO Yilin,LI Meng,et al.Summary of digital twin application research in field of safety engineering technology[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2022,18(8):243.[doi:10.11731/j.issn.1673-193x.2022.04.035]
[10]徐海军,李彦斌,王进,等.基于模糊Petri网的有载分接开关故障诊断方法研究*[J].中国安全生产科学技术,2022,18(5):222.[doi:10.11731/j.issn.1673-193x.2022.05.034]
 XU Haijun,LI Yanbin,WANG Jin,et al.Research on fault diagnosis method of on-load tap changer based on Fuzzy Petri net[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2022,18(8):222.[doi:10.11731/j.issn.1673-193x.2022.05.034]

备注/Memo

备注/Memo:
收稿日期: 2023-03-09
* 基金项目: 云南省科技厅重大科技专项计划项目(202202AC080008);国家自然科学基金项目(52065030)
作者简介: 普会杰,硕士研究生,主要研究方向为迁移学习、机械设备状态监测及故障诊断等。
通信作者: 刘韬,博士,教授,主要研究方向为设备状态监测及故障诊断。
更新日期/Last Update: 2023-09-07