|本期目录/Table of Contents|

[1]张哲,王璐,徐长峰,等.基于检验测试策略的PFD模型建立与分析*[J].中国安全生产科学技术,2021,17(2):128-134.[doi:10.11731/j.issn.1673-193x.2021.02.020]
　ZHANG Zhe,WANG Lu,XU Changfeng,et al.Establishment and analysis of PFD model based on proof test strategy[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2021,17(2):128-134.[doi:10.11731/j.issn.1673-193x.2021.02.020]
点击复制

基于检验测试策略的PFD模型建立与分析*
分享到：

《中国安全生产科学技术》[ISSN:1673-193X/CN:11-5335/TB]

卷:
17
期数:
2021年2期
页码:
128-134
栏目:
职业安全卫生管理与技术
出版日期:
2021-02-28

文章信息/Info

Title:
Establishment and analysis of PFD model based on proof test strategy
文章编号:
1673-193X(2021)-02-0128-07
作者:
张哲; 王璐; 徐长峰; 赵国军; 陈月娥; 刘晓亮
（1.中国石油新疆油田分公司（呼图壁储气库作业区），新疆 呼图壁 831200；
2.机械工业仪器仪表综合技术经济研究所，北京 100055）
Author(s):
ZHANG Zhe;  WANG Lu;  XU Changfeng;  ZHAO Guojun;  CHEN Yuee;  LIU Xiaoliang
(1.PetroChina XinJiang Oil Field Company (Hutubi Gas Storage Depot Operation Area),Hutubi Xinjiang 831200,China;
2.Instrumentation Technology and Economy Institute,Beijing 100055,China)
关键词:
安全仪表系统; 要求平均失效概率; 部分检验测试; 完全检验测试; 安全完整性等级
Keywords:
safety instrumented system (SIS);  PFDavg;  partial proof test;  complete proof test;  safety integrity level (SIL)
分类号:
X937
DOI:
10.11731/j.issn.1673-193x.2021.02.020
文献标志码:
A
摘要:
为制定合理检验测试策略，提高安全仪表系统（SIS）在低要求运行模式下的安全性，提出要求平均失效概率(PFDavg)通用计算模型，引入检验测试分布因子和共因失效修正因子，表征部分和完全检验测试对SIS安全性的影响。结果表明：该模型适用于所有同构koon架构系统，可应用于周期性、非周期性部分检验测试及共因失效影响较大的场景，可以为企业制定检验测试策略提供理论依据。
Abstract:
In order to formulate the reasonable proof test strategy to improve the safety of safety instrumented system (SIS) in the lowdemand operation mode,a general calculation model of the average probability of dangerous failure on demand (PFDavg) including the partial and complete proof test was proposed,which was suitable for the isomorphic koon architecture SIS.The proof test distribution factor and the common cause failure (CCF) correction factor were introduced into the model,and the influence of partial and complete proof test on the SIS safety was reflected,so it can be applied in the proof test strategy including the periodic or nonperiodic partial proof test.The model was applied to the assessment of the emergency shutoff valve subsystem,and the application results showed that the model was practical and feasible,and it can be used as an effective tool for selecting the costeffective proof test strategy.

参考文献/References:

［1］IEC 61511,part 1-3.Functional safety :safety instrumented systems for the process industry sector［S］.Geneva:International Electrotechnical Commission,2016.
［2］JIN H,RAUSAND M.Reliability of safety-instrumented systems subject to partial-testing and common-cause failures ［J］.Reliability Engineering and System Safety,2014(121):146-151.
［3］池亚娟,付建民，李宏浩，等.基于人因可靠性的间歇装置SIL分析与改进［J］.中国安全生产科学技术,2018,14(3):136-143. CHI Yajuan,FU Jianmin,LI Honghao,et al.Analysis andimprovement of safety integrity level for batch equipment based on human reliability［J］.Journal of Safety Science and Technology,2018,14(3):136-143.
［4］LUNDTEIGENM A,RAUSAND M.Partial stroke testing of process shutdown valves:How to determine the test coverage ［J］.Journal of Loss Prevention in the Process Industries,2008,21:579-588.
［5］王海清,乔丹菊,刘祥妹，等.异型冗余设备KooN结构通用PFD计算模型［J］.中国安全科学学报,2016,26（8）：90-94. WANG Haiqing,QIAO Danju,LIU Xiangmei,et al.,Modelfor calculating generalizing PFD of non-identical redundant KooN configurations［J］.China Safety Science Journal,2016,26（8）：90-94.
［6］于智洋,耿立文,张杰.紧急停车系统中紧急关断阀的在线测试方法 ［J］.重庆工学院学报(自然科学版),2008,21(10):190-192. YU Zhiyang,GENG Liwen,ZHANG Jie,Study onvalve online test methods for emergency shutdown in emergency shutdown system［J］.Journal of Chongqing of Technology(Natural Science),2008,21(10):190-192.
［7］IEC 61508，part 1-7.Functional safety of electrical/electronic/programmable electronic safety-related systems［S］.Geneva:International Electrotechnical Commission，2010.
［8］HAUGE S,LUNDTEIGEN M A,HOKSTAD P,et al.Reliability prediction method for safety instrumented systems-PDS method handbook.SINTEF report A13503［R］.SINTEF Safety Research,Trondheim,Norway,2010.
［9］SUMMERS A,ZACHARYB.Partial-stroke testing of safety block valves［J］.Control Engineering，2000,47(12):87-89.
［10］TORRES-ECHEVERRIA A C,MARTORELL S,THOMPSON H A.Modelling and optimization of proof testing policies for safety instrumented systems［J］.Reliability Engineering and System Safety，2009,94:838-854.
［11］BRISSAU D F,BARROS A,BERENGUE R C.Probability of failure on demand of safety systems:impact of partial test distribution ［J］.Journal of Risk and Reliability,2012,226(4):426-436.
［12］郭利进,闫科举.基于多相Markov链安全仪表系统PFD的设计［J］.机械设计,2016,33(S1):321-325. GUO Lijin,YAN Keju.Design of SIS PFD by multiphase Markov chain［J］.Journal of Machine Design,2016，33（S1）:321-325.
［13］JIN J H,PANG L,HU B.Impact of proof test interval and coverage on probability of failure of safety instrumented function［J］.Annals of Nuclear Energy,2016,2(87),537-540.
［14］VAURIO J K.Unavailability equations for k-out-of-n systems［J］.Reliability Engineering & System Safety,2011,96(2):350-352.
［15］管文涌,王新园,杨阔.站场ESD系统触发回路可靠性及提升措施 ［J］.油气储运,2019,38(10):1151-1158. GUAN Wenyong,WANG Xinyuan,YANG Kuo,The reliability and improvement measures of trigger circuit of ESD system at gas transmission stations ［J］.Oil&Gas Storage and Transportation,2019,38(10):1151-1158.
［16］HAUGE S,LUNDTEIGEN M A.Guidelines for follow-up of Safety Instrumented Systems(SIS) in the operating phase［R］.SINTEF Technology and Society Safety and Reliability,2008.
［17］靳江红,赵寿堂,胡玢.安全仪表系统的测试覆盖率研究［C］//Yantai,China.Proceedings of the 30th Chiness Control Conference,2011:4228-4231.
［18］张宏扬，段武，王龙生，等.基于 PDS 的铁路信号冗余结构危险失效概率计算方法 ［J］.铁路标准设计,网络首发,2020,64(4):1-8. ZHANG Hongyang,DUAN Wu,WANG Longsheng,et al.Computing method of probability of a dangerous failure of redundancy structures of railway signal based on PDS ［J］.Railway Standard Design,2020,64(4):1-8.
［19］HAUGE S,HABREKKE S,LUNDTEIGEN M A.Reliability prediction method for safety instrumented systems-PDS example collection,SINTEF report A17956［R］.SINTEF Safety Research,Trondheim,Norway,2010.
［20］ORED A.Offshore and onshore reliability data 6th edition volume.1-topside equipment［M］.SINTEF and NTNU.

相似文献/References:

[1]姜颖.重大危险源安全与自动化监控系统[J].中国安全生产科学技术,2010,6(4):161.
　JIANG Ying.Safety and automation manitoring system for major hazard installations[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2010,6(2):161.
[2]方来华,吴宗之,康荣学,等.安全设备失效数据获取与计算[J].中国安全生产科学技术,2010,6(3):121.
　FANG Lai-hua,WU Zong-zhi,KANG Rong-xue,et al.The acquisition and calculation of failure data of safety equipment[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2010,6(2):121.
[3]方来华,吴宗之,康荣学,等.安全仪表系统的性能维护及指标值计算[J].中国安全生产科学技术,2011,7(11):46.
　FANG Lai-hua,WU Zong-zhi,KANG Rong-xue,et al.Performance maintenance and indicator value calculation of safety instrumented system[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2011,7(2):46.
[4]李娜,孙文勇,宁信道.HAZOP、LOPA和SIL方法的应用分析[J].中国安全生产科学技术,2012,8(5):107.
　LI Na,SUN Wen yong,NING Xin dao.The application of HAZOP, LOPA and SIL analytical method[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2012,8(2):107.
[5]李毅,熊亮,邓海发,等.SIL评估及HAZOP分析技术在海洋平台安全评估中的应用[J].中国安全生产科学技术,2013,9(8):119.[doi:10.11731/j.issn.1673-193x.2013.08.022]
　LI Yi,XIONG Liang,DENG Hai fa,et al.Application of SIL evaluation and HAZOP analysis technology in safety assessment of offshore platform[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2013,9(2):119.[doi:10.11731/j.issn.1673-193x.2013.08.022]
[6]钱钧,魏利军,李少鹏.安全仪表系统等级划分与HAZOP分析的结合应用[J].中国安全生产科学技术,2009,5(5):148.
　QIAN Jun,WEI Li jun,LI Shao peng.Combined application of safety instrumented system classification and HAZOP analysis[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2009,5(2):148.
[7]夏阳光,陶刚,张礼敬.基于FFTA-LOPA的化工装置安全仪表系统SIL确定方法[J].中国安全生产科学技术,2016,12(6):142.[doi:10.11731/j.issn.1673-193x.2016.06.025]
　XIA Yangguang,TAO Gang,ZHANG Lijing.Study on determination method of SIL for safety instrumented system of chemical plant based on FFTA-LOPA[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2016,12(2):142.[doi:10.11731/j.issn.1673-193x.2016.06.025]
[8]李宏浩,付建民,李成美,等.基于Monte Carlo与Markov法参数不确定性条件下SIL评估[J].中国安全生产科学技术,2016,12(9):109.[doi:10.11731/j.issn.1673-193x.2016.09.020]
　LI Honghao,FU Jianmin,LI Chengmei,et al.SIL evaluation with parameters uncertainty based on Monte Carlo and Markov methods[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2016,12(2):109.[doi:10.11731/j.issn.1673-193x.2016.09.020]
[9]池亚娟,付建民,李宏浩,等.基于人因可靠性的间歇装置SIL分析与改进[J].中国安全生产科学技术,2018,14(3):136.[doi:10.11731/j.issn.1673-193x.2018.03.020]
　CHI Yajuan,FU Jianmin,LI Honghao,et al.Analysis and improvement of safety integrity level for batch equipment based on human reliability[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2018,14(2):136.[doi:10.11731/j.issn.1673-193x.2018.03.020]
[10]王海清,乔丹菊,冯军,等.石化装置安全仪表系统KooN表决结构的误跳车率定量分析[J].中国安全生产科学技术,2018,14(12):152.[doi:10.11731/j.issn.1673-193x.2018.12.025]
　WANG Haiqing,QIAO Danju,FENG Jun,et al.Quantitative analysis on spurious trip rate of safety instrumented system with KooN voting architectures in petrochemical plant[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2018,14(2):152.[doi:10.11731/j.issn.1673-193x.2018.12.025]

备注/Memo

备注/Memo:
收稿日期： 2020-07-31
* 基金项目： 国家重点研发计划项目(2018YF2004100)；新疆油田公司对外协作项目呼图壁储气库自控系统运行评价及风险分析研究项目（HTBCQK-2019-070）
作者简介： 张哲，本科，工程师，主要研究方向为油气田工程。
通信作者： 王璐，硕士，工程师，主要研究方向为工业功能安全分析、评估与测试。
更新日期/Last Update: 2021-03-11