|本期目录/Table of Contents|

[1]王云刚,唐飞,杜炳成,等.超长回采工作面微震特征的影响因素研究*[J].中国安全生产科学技术,2022,18(8):91-97.[doi:10.11731/j.issn.1673-193x.2022.08.014]
　WANG Yungang,TANG Fei,DU Bingcheng,et al.Study on influencing factors of microseismic characteristics of ultra-long mining face[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2022,18(8):91-97.[doi:10.11731/j.issn.1673-193x.2022.08.014]
点击复制

超长回采工作面微震特征的影响因素研究*
分享到：

《中国安全生产科学技术》[ISSN:1673-193X/CN:11-5335/TB]

卷:
18
期数:
2022年8期
页码:
91-97
栏目:
职业安全卫生管理与技术
出版日期:
2022-08-31

文章信息/Info

Title:
Study on influencing factors of microseismic characteristics of ultra-long mining face
文章编号:
1673-193X(2022)-08-0091-07
作者:
王云刚; 唐飞; 杜炳成; 孔祥岩
（1.河南理工大学 安全科学与工程学院，河南 焦作 454000；
2.河南理工大学 河南省瓦斯地质瓦斯治理省部共建国家重点实验室培育基地，河南 焦作 454000；
3.河南理工大学 煤炭安全生产河南省协同创新中心，河南 焦作 454000）
Author(s):
WANG Yungang;  TANG Fei;  DU Bingcheng;  KONG Xiangyan
(1.School of Safety Science and Engineering,Henan Polytechnic University,Jiaozuo Henan 454000,China;
2.State Key Laboratory Cultivation Base for Gas Geology and Gas Control,Henan Polytechnic University,Jiaozuo Henan 454000,China;
3.Collaborative Innovation Center of Coal Safety Production of Henan Province,Henan Polytechnic University,Jiaozuo Henan 454000,China)
关键词:
微震监测; 冲刷构造; 推进速度; 矿压
Keywords:
microseismic monitoring;  scouring structure;  advancing speed;  mining pressure
分类号:
X936;TD324
DOI:
10.11731/j.issn.1673-193x.2022.08.014
文献标志码:
A
摘要:
为探讨超长工作面微震特征影响因素，采用微震监测技术研究42108工作面微震事件的空间分布特征及冲刷构造、推进速度、矿压对煤岩体微震事件特征的影响机制。研究结果表明：微震事件集中发生于工作面辅运巷侧，微震事件的空间分布受临近采空区、上覆煤层煤柱影响较大；微震事件能量和空间分布特征与推进速度相关性较差，当推进速度超过5.5 m/d后，微震事件频次、总能量与推进速度呈正相关；过冲刷构造时工作面推进速度降低，微震能量、频次的稳定性较差，易造成大能量积聚，使工作面危险性增大；微震事件集中发生位置与矿压值较大区域相吻合。
Abstract:
In order to explore the influencing factors of the microseismic characteristics of ultra-long mining face,the microseismic monitoring technology was used to study the spatial distribution characteristics of microseismic events in 42108 working face and the influencing mechanism of scouring structure,advancing speed and mining pressure on the characteristics of microseismic events in coal and rock mass.The results showed that the microseismic events mainly occurred at the side of the auxiliary transportation roadway of the working face,and the spatial distribution of microseismic events was greatly affected by the adjacent goaf and the overlying coal pillar；The correlation between the energy and spatial distribution characteristics of microseismic events and the advancing speed was poor,and when the advancing speed exceeded 5.5 m/d,the frequency and total energy of microseismic events were positively correlated with the advancing speed；When passing through the scouring structure,the advancing speed of the working face decreased,the stability of the microseismic energy and frequency was poor,which was easy to cause the accumulation of large energy and increase the risk of the working face；The concentrated location of microseismic events was consistent with the region with large mining pressure.

参考文献/References:

［1］袁亮.我国煤矿安全发展战略研究［J］.中国煤炭,2021,47(6):1-6. YUAN Liang.Research on the development strategy of coal mine safety in China ［J］.China Coal,2021,47(6):1-6.
［2］姜福兴,杨淑华,成云海,等.煤矿冲击地压的微地震监测研究［J］.地球物理学报,2006(5):1511-1516. JIANG Fuxing,YANG Shuhua,CHENG Yunhai,et al.Study on microseismic monitoring of rock burst in coal mine ［J］.Chinese Journal of Geophysics,2006(5):1511-1516.
［3］王恩元,何学秋,窦林名，等.煤矿采掘过程中煤岩体电磁辐射特征及应用［J］.地球物理学报,2005(1):216-221. WANG Enyuan,HE Xueqiu,DOU Linming,et al.Characteristics and application of electromagnetic radiation of coal and rock mass during coal mining［J］.Chinese Journal of Geophysics,2005(1):216-221.
［4］谭云亮,李芳成,周辉,等.冲击地压声发射前兆模式初步研究［J］.岩石力学与工程学报,2000(4):425-428. TAN Yunliang,LI Fangcheng,ZHOU Hui,et al.Preliminary study on the precursor model of rock burst acoustic emission［J］.Chinese Journal of Rock Mechanics and Engineering,2000(4):425-428.
［5］HARDY R.Acoustic emission/microseismic activity:Volume 1［M］.Lisse，Netherlands:A.A.Balkema Publishers，2003.
［6］GE M Ch.Efficient mine microseismic monitoring［J］.International Journal of Coal Geology，2005，64(8):44-56.
［7］夏永学,潘俊锋,王元杰，等.基于高精度微震监测的煤岩破裂与应力分布特征研究［J］.煤炭学报,2011,36(2):239-243. XIA Yongxue,PAN Junfeng,WANG Yuanjie，et al.Research on coal and rock fracture and stress distribution characteristics based on high-precision microseismic monitoring［J］.Journal of China Coal Society,2011,36(2):239-243.
［8］李铁,蔡美峰,王金安，等.深部开采冲击地压与瓦斯的相关性探讨［J］.煤炭学报,2005(5):20-25. LI Tie,CAI Meifeng,WANG Jin 'an,et al.Discussion on correlation between rock burst and gas in deep mining ［J］.Journal of China Coal Society,2005(5):20-25.
［9］ALBER M,FRITSCHEN R,BISCHOFF M,et al.Rock mechanical investigations of seismic events in a deep longwall coal mine［J］.International Journal of Rock Mechanics and Mining Sciences,2009,46(2):408-420.
［10］SHVAREV N G,MARKOV N S.The method to model microseismic events during hydrofracture propagation［J］.Journal of Mining Science,2019，55(5):751-764.
［11］曹安业,窦林名,秦玉红,等.高应力区微震监测信号特征分析［J］.采矿与安全工程学报,2007(2):146-149，154. CAO Anye,DOU Linming,QIN Yuhong,et al.Analysis of signal characteristics of microseismic monitoring in high stress areas［J］.Journal of Mining and Safety Engineering,2007(2):146-149，154.
［12］陆菜平,窦林名,曹安业,等.深部高应力集中区域矿震活动规律研究［J］.岩石力学与工程学报,2008(11):2302-2308. LU Caiping,DOU Linming,CAO Anye,et al.Research on the law of mine earthquake activity in deep high stress concentration areas［J］.Chinese Journal of Rock Mechanics and Engineering,2008(11):2302-2308.
［13］朱权洁,姜福兴,于正兴,等.爆破震动与岩石破裂微震信号能量分布特征研究［J］.岩石力学与工程学报,2012,31(4):723-730. ZHU Quanjie,JIANG Fuxing,YU Zhengxing,et al.Study on energy distribution characteristics of blasting vibration and rock fracture microseismic signals［J］.Chinese Journal of Rock Mechanics and Engineering,2012,31(4):723-730.
［14］王金贵,张苏.煤岩静爆致裂微震活动规律及频谱演变特征［J］.煤炭学报,2017,42(7):1706-1713. WANG Jingui,ZHANG Su.The microseismic activity law and frequency spectrum evolution characteristics of static blasting fracturing of coal and rock［J］.Journal of China Coal Society,2017,42(7):1706-1713.
［15］李岩,魏焕伟,武海滨,等.基于ARAMIS M/E监测系统的新河矿微震活动特征研究［J］.煤矿开采,2017,22(5):78-80. LI Yan,WEI Huanwei,WU Haibin,et al.Research on characteristics of microseismic activity in Xinhe mine based on ARAMIS M/E monitoring system［J］.Coal Mining Technology,2017,22(5):78-80.
［16］向鹏,苏晓波,纪洪广,等.高构造应力下冲击地压微震时空特征与前兆［J］.煤矿安全,2018,49(2):177-181. XIANG Peng,SU Xiaobo,JI Hongguang,et al.The temporal and spatial characteristics and precursors of microseisms of rockburst under high tectonic stress［J］.Safety in Coal Mines,2018,49(2):177-181.
［17］赵扬锋,荆刚,程传杰，等.含裂隙砂岩破裂特征及微震和电荷感应信号规律试验研究［J］.振动与冲击,2020,39(23):211-219，233. ZHAO Yangfeng,JING Gang,CHENG Chuanjie，et al.Experimental study on the fracture characteristics of fractured sandstone and the law of microseismic and charge induction signals［J］.Journal of Vibration and Shock,2020,39(23):211-219，233.
［18］高永刚,叶飞,赵维收.复合顶板下冲击地压煤层综放工作面微震特征分析［J］.矿业安全与环保,2020,47(3):110-114. GAO Yonggang,YE Fei,ZHAO Weishou.Analysis of microseismic characteristics of fully mechanized caving face in rockburst coal seam under composite roof［J］.Mining Safety and Environmental Protection,2020,47(3):110-114.

相似文献/References:

[1]张飞,刘德峰,张衡,等.基于IMS微震监测系统的微震事件定位精度分析[J].中国安全生产科学技术,2013,9(6):21.[doi:10.11731/j.issn.1673-193x.2013.06.004]
　ZHANG Fei,LIU De feng,ZHANG Heng,et al.Location accuracy analysis of the seismic events based on the IMS microseismic monitoring system[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2013,9(8):21.[doi:10.11731/j.issn.1673-193x.2013.06.004]
[2]张宏伟,朱峰,盛继权,等.多手段综合分析特厚煤层分层开采覆岩破坏高度[J].中国安全生产科学技术,2016,12(1):11.[doi:10.11731/j.issn.1673-193x.2016.01.002]
　ZHANG Hongwei,ZHU Feng,SHENG Jiquan,et al.Multiple means comprehensive analysis on failure height of overburden strata in slicing mining of ultra thick coal seam[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2016,12(8):11.[doi:10.11731/j.issn.1673-193x.2016.01.002]
[3]张楚旋,李夕兵,董陇军,等.基于微震监测的岩体失稳智能预报[J].中国安全生产科学技术,2016,12(3):5.[doi:10.11731/j.issn.1673-193x.2016.03.001]
　ZHANG Chuxuan,LI Xibing,DONG Longjun,et al.Intelligent prediction of rock mass instability based on microseismic monitoring[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2016,12(8):5.[doi:10.11731/j.issn.1673-193x.2016.03.001]
[4]张宏伟,朱峰,盛继权,等.多手段综合分析特厚煤层分层开采覆岩破坏高度[J].中国安全生产科学技术,2016,12(1):11.[doi:10.11731/j.issn.1673-193x.2016.01.002]
　ZHANG Hongwei,ZHU Feng,SHENG Jiquan,et al.Multiple means comprehensive analysis on failure height of overburden strata in slicing mining of ultra thick coal seam[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2016,12(8):11.[doi:10.11731/j.issn.1673-193x.2016.01.002]
[5]杨逾,孙艺丹,张国赟.动载下巷道围岩微震响应特征及支护研究[J].中国安全生产科学技术,2020,16(6):73.[doi:10.11731/j.issn.1673-193x.2020.06.012]
　YANG Yu,SUN Yidan,ZHANG Guoyun.Study on microseismic response characteristics and support technology of roadway surrounding rock under dynamic load[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2020,16(8):73.[doi:10.11731/j.issn.1673-193x.2020.06.012]
[6]刘强,魏银鸿,王平,等.自然崩落法顶板稳定性监测分析与预警研究*[J].中国安全生产科学技术,2021,17(8):91.[doi:10.11731/j.issn.1673-193x.2021.08.014]
　LIU Qiang,WEI Yinhong,WANG Ping,et al.Study on roof stability monitoring analysis and early warning by natural caving method[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2021,17(8):91.[doi:10.11731/j.issn.1673-193x.2021.08.014]
[7]雷文杰,张朝阳.原煤卸围压过程微震信号响应特征*[J].中国安全生产科学技术,2022,18(10):94.[doi:10.11731/j.issn.1673-193x.2022.10.014]
　LEI Wenjie,ZHANG Zhaoyang.Response characteristics of micro-seismic signals during unloading confining pressure process of raw coal[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2022,18(8):94.[doi:10.11731/j.issn.1673-193x.2022.10.014]
[8]吴雪菲,李红霞,朱梦博.单侧采空工作面底板采动破坏微震监测与数值模拟研究*[J].中国安全生产科学技术,2023,19(4):78.[doi:10.11731/j.issn.1673-193x.2023.04.011]
　WU Xuefei,LI Hongxia,ZHU Mengbo.Microseismic monitoring and numerical simulation of coal seam floor mining-induced failure in unilateral mined-out face[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2023,19(8):78.[doi:10.11731/j.issn.1673-193x.2023.04.011]

备注/Memo

备注/Memo:
收稿日期： 2021-07-08；网络首发日期： 2022-05-13
* 基金项目： 国家自然科学基金项目（U1704129，51804099）；河南省基础与前沿技术研究计划项目（14230013211）
作者简介： 王云刚，博士，教授，主要研究方向为瓦斯灾害防治和安全监测理论与技术。
通信作者： 唐飞，硕士研究生，主要研究方向为煤矿动力灾害防治和安全监测。
更新日期/Last Update: 2022-09-19