|本期目录/Table of Contents|

[1]刘茜,史聪灵,伍彬彬,等.某大型机加车间数控机床减噪工程测试与分析研究[J].中国安全生产科学技术,2019,15(11):164-169.[doi:10.11731/j.issn.1673-193x.2019.11.026]
　LIU Qian,SHI Congling,WU Binbin,et al.Study on testing and analysis of noise reduction engineering for numericallycontrolled machine tools in a large machining workshop[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2019,15(11):164-169.[doi:10.11731/j.issn.1673-193x.2019.11.026]
点击复制

某大型机加车间数控机床减噪工程测试与分析研究
分享到：

《中国安全生产科学技术》[ISSN:1673-193X/CN:11-5335/TB]

卷:
15
期数:
2019年11期
页码:
164-169
栏目:
职业安全卫生管理与技术
出版日期:
2019-11-30

文章信息/Info

Title:
Study on testing and analysis of noise reduction engineering for numericallycontrolled machine tools in a large machining workshop
文章编号:
1673-193X(2019)-11-0164-06
作者:
刘茜; 史聪灵; 伍彬彬; 胥旋; 石杰红; 王莹
(1.中国安全生产科学研究院 地铁火灾与客流疏运安全北京市重点实验室，北京 100012；
2.中车长春轨道客车股份有限公司，吉林 长春 130062)
Author(s):
LIU Qian;  SHI Congling;  WU Binbin;  XU Xuan;  SHI Jiehong;  WANG Ying
(1.Beijing Key Laboratory of Metro Fire and Passenger Transportation Safety,China Academy of Safety Science and Technology,Beijing 100012,China;
2.CRRC Changchun Railway Vehicles Co.,Ltd.,Changchun Jilin 130062,China)
关键词:
大型机加车间; 数控机床; 噪声; 职业噪声暴露
Keywords:
large machining workshop;  numericallycontrolled (NC) machine tool;  noise;  occupational noise exposure
分类号:
X966
DOI:
10.11731/j.issn.1673-193x.2019.11.026
文献标志码:
A
摘要:
为研究大型机加车间噪声减噪工程现状效果和特点，选取某大型机加车间数控机床为研究对象，对其进行减噪工程治理，现场实测了治理前和治理后的噪声数据，并对噪声测量结果进行分析。研究结果表明：数控机床操作人员8 h连续等效A声级从治理前的89.2 dB(A)，降到治理后的74.3 dB(A)，降低了16.7%.；数控机床操作岗位位置测点，在加工1个机件的测量时间段里，噪声值从治理前的85.9 dB(A)，降到治理后的55.1 dB(A)，降低了33.85%；对机加车间现场布置了67个测点，在加工1个机件的测量时间段里进行测量，得到该车间噪声治理前和治理后噪声分布图；对数控机床减噪工程治理前和治理后的频谱进行了分析，得出治理前和治理后各自的最大声级所在频段不随距离的改变而改变，高频减噪效果显著。
Abstract:
In order to study the current effect and characteristics of the noise reduction engineering in the large machining workshops,the noise reduction engineering management was carried out on the numericallycontrolled (NC) machine tools in a selected large machining workshop.The noise data before and after the noise reduction management were measured on the worksite,and the measurement results of noise were analyzed.The results showed that the 8 hours equivalent continuous Aweighted sound pressure level of the NC machine tool operator reduced from 89.2 dB(A) before the management to 74.3 dB(A) after the management,which reduced by 16.7%.In the measurement time period of processing a work piece,the noise value at the measurement point on the operation post of NC machine tool reduced from 85.9 dB(A) before the management to 55.1 dB(A) after the management,which reduced by 33.85%.67 measurement points were laid on the site of machining workshop,and the measurement was conducted in the measurement time period of processing a work piece,then the noise distribution diagrams of the workshop before and after the noise reduction management were obtained.The spectrums before and after the NC noise reduction engineering management were analyzed,which indicated that the respective frequency band of the maximum sound pressure level before and after the management would not change with the change of distance,and the effect of high frequency noise reduction was significant.

参考文献/References:

［1］中华人民共和国卫生部.工作场所物理因素测量第八部分：噪声：GBZ/T 189.8—2007 ［S］.北京：中国标准出版社，2007.
［2］中华人民共和国卫生部.工作场所有害因素职业接触限值第2部分：物理因素：GBZ2.2—2007 ［S］.北京：人民卫生出版社，2007.
［3］中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会.声学职业噪声暴露的测定工程法：GB/T 21230—2014/ISO 9612：2009 ［S］.北京：中国标准出版社，2014.
［4］谢红卫，张美辨，全长健.累计噪声暴露量与人听力损失的剂量反应关系研究［J］.浙江预防医学，2014,26(4):340-348. XIE Hongwei,ZHANG Meibian,QUAN Changjian.A study on dose-response relationship between cumulative noise exposure and human hearing loss［J］.Zhejiang Journal of Preventive Medicine,2014,26 (4) :340-348.
［5］王军义，肖全华，夏源，等.累积噪声暴露量与噪声性听力损失关系的探讨［J］.职业卫生与应急救援，2009,27 (3):131-133. WANG Junyi,XIAO Quanhua,XIA Yuan,et al.Relationship between cumulative noise exposure and hearing loss［J］.Occupational Health and Emergency Rescue,2009,27 (3):131-133.
［6］陈辉，蒋健敏，张美辨，等.工业噪声测量指标研究进展［J］.浙江预防医学，2016,28(4):376-379. CHEN Hui,JIANG Jianmin,ZHANG Meibian,et al.Research progress of industrial noise measurement indicators ［J］.Zhejiang Journal of Preventive Medicine,2016,28(4):376-379.
［7］ANSI S12.19—1996(Reaffirmed by ANSI June 28,2011),American National Standard Measurement of Occupational Nosie Exposure［S］.Acoustical Society of America,2007.
［8］谢红卫，张美辨，张磊，等.非稳态噪声工作场所噪声暴露测量与评价［J］.环境与职业医学，2013,30(10):748-752. XIE Hongwei,ZHANG Meibian,ZHANG Lei,et al.Measurement and evaluation on workplace non-steady noise exposure ［J］.Journal of Environmental and Occupational Medicine,2013,30 (10):748-752.
［9］中华人民共和国环境保护部.工业企业厂界环境噪声排放标准：GB 12348—2008 ［S］.北京：中国环境科学出版社，2008.
［10］方丹群，张斌，孙家麒，等.噪声控制（上、下册）［M］.北京：科学出版社，2013.
［11］中华人民共和国国家计划委员会.《工业企业噪声测量规范》：GBJ 122—1988 ［S］.北京：中国计划出版社，1998.
［12］ASME PTC 36—2004,Measurement of Industrial Sound［S］.ASME International（ASME）,2004.

相似文献/References:

[1]刘茜,史聪灵,伍彬彬,等.某大型机加车间数控机床噪声暴露特点与分析研究[J].中国安全生产科学技术,2019,15(5):161.[doi:10.11731/j.issn.1673-193x.2019.05.026]
　LIU Qian,SHI Congling,WU Binbin,et al.Study on characteristics and analysis of noise exposure of NC Machine Tools in a large machine workshop[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2019,15(11):161.[doi:10.11731/j.issn.1673-193x.2019.05.026]

备注/Memo

备注/Memo:
收稿日期： 2019-04-15
* 基金项目： 十三五国家重点研发计划项目(2016YFC0801700)；基本科研业务费专项项目（2019JBKY02）；国家自然科学基金项目(51622403)；“万人计划”入选人才特殊支持经费项目（WRJH201801）；中国安全生产科学研究院基本科研业务费专项(2019JBKY01)
作者简介： 刘茜，本科，教授级高级工程师，主要研究方向为城市轨道交通和工业企业噪声防治技术的应用及噪声检测与评估。
通信作者： 伍彬彬，硕士，高级工程师
更新日期/Last Update: 2019-12-25