|本期目录/Table of Contents|

[1]侯海周,胡毅亭,卫延安.基于试验的工业雷管传输皮带殉爆距离的安全评价[J].中国安全生产科学技术,2011,7(9):93-96.
　HOU Hai-zhou,Hu Yi-ting,Wei Yan-an.Safety Assessment for Safety Distance of Propagation Blast of Transmission Belts of Industrial detonators Based on Experimental[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2011,7(9):93-96.
点击复制

基于试验的工业雷管传输皮带殉爆距离的安全评价()
分享到：

《中国安全生产科学技术》[ISSN:1673-193X/CN:11-5335/TB]

卷:
7
期数:
2011年9期
页码:
93-96
栏目:
职业安全卫生管理与技术
出版日期:
2011-09-30

文章信息/Info

Title:
Safety Assessment for Safety Distance of Propagation Blast of Transmission Belts of Industrial detonators Based on Experimental
文章编号:
1673-193X(2011)-09-0093-04
作者:
侯海周; 胡毅亭; 卫延安
南京理工大学，南京? 210094
Author(s):
HOU Hai-zhou;  Hu Yi-ting;  Wei Yan-an
Nanjing University of Science and Technology, Nanjing 210094, China
关键词:
安全工程; 工业雷管; 殉爆; 升降法
Keywords:
safety engineering;  industrial detonator;  propagation blast;  lift-descending method
分类号:
X932
DOI:
-
文献标志码:
A
摘要:
由于目前对于殉爆问题没有从理论上精确地定量描述这种复杂现象的模型,因此针对工业雷管生产线中传输皮带上雷管殉爆的问题,采用升降试验的方法分别确定了100发DDNP起爆药纸壳雷管、100发DDNP起爆药铝壳雷管1、00发无起爆药纸壳雷管和100发无起爆药矿用纸壳雷管殉爆安全距离,对试验方法选择的合理性进行了分析评价,对试验条件下得出的结果用于指导工业雷管生产线中传输皮带上雷管摆放的合理性进行了分析。结果表明,文章得出的雷管发生殉爆概率为0.01%时的距离值可以用于确定工业雷管生产线传输皮带上雷管之间的殉爆安全距离。对于工业雷管生产线中存在的殉爆安全问题,采用试验的方法进行评价是合理的,得出结论在工业雷管生产线实际生产过程中有推广应用价值,对提高工业雷管生产线安全性有指导意义。
Abstract:
There is not the model that quantitative description for the problem of propagated blast theory. The problem of propagated blast is studied by experimental method. And the sensitivity of typical initiating explosive is normal distribution. Therefore, the problem of detonator propagates blast for the production line of industrial detonators can investigate by experiment. The safety distance of propagated blast for 100 DDPN primary explosive detonators and 100 non-primary explosive detonators is tested by lift-descending method in this article. The explosive shock wave overpressure of 100 detonators in the rigid ground is greater than the belt at a distance of 0.45m on the ground through quantitative calculation. The results under the experimental conditions can be used to guide the actual production line. The results show that the articles obtained 100 detonators propagated blast occurred 0.01% probability of the distance value can be used to determine the transmission belt production line of industrial detonator on the safe distance between the propagated blast. Visible for the problem of propagated blast in the industrial detonator production line, the use of test method to evaluate is reasonable to conclude in the industrial detonator production actual production in the process of application value, to improve the industrial detonator production line safety instructive.

参考文献/References:

[1]王泽溥,郑志良.爆炸及其防护[M].北京:兵器工业出版社,2008,12:138,63,65[2]李国新,程国元,焦清介.火工品实验与测试技术[M].北京:北京理工大学出版社,1998,8:18[3]张华,郭宝义.管体材质和装药量对雷管起爆能力影响的研究[J].辽宁工程技术大学学报（自然科学版）,2001,20(1):29-31ZHANG Hua,GUO Bao-yi. The Study of the Effect of the Tube Materials and the Explosive Charge on the Detonating Capacity of the Detonator[J].Journal of Liaoning Technical University(Natural Science),2001,20(1):29-31[4]赵耀辉,焦清介,臧充光,刘帅.雷管包装中防殉爆措施的分析[J].工业安全与环保,2006,32(2):46-47ZHAO Yao-hui,JIAO Qing-jie,ZANG Chong-guang,LIU Shuai. Analysis on Anti-sympathetic Detonation Measures in Package of Detonator[J].Industrial Safety and Environmental Protection,2006,32(2):46-47[5]朱顺官,牟景艳,吴幼成.雷管侧向殉爆效应特点研究[J].火工品,2004(2):33-35ZHU Shun-guan,MU Jing-yan,WU You-cheng. Studied on Characteristics of Side Sympathetic Explosive of Detonators[J].Initiators & Pyrotechnics,2004(2)33-35[6]陈网桦,冯伟,彭金华,胡毅亭,王正宏,刘荣海.空气及半硬质聚氨酯泡沫塑料中爆炸波传播特性的研究[J].火炸药学报,2001(4):41-42,45CHEN Wang-hua,FENG Wei,PENG Jin-hua,HU Yi-ting,WANG Zheng-hong,LIU Rong-hai. Experimental Investigation of Propagation Properties of Blast Waves in Air and in Semi-rigid Polyurethane Foam[J].Chinese Journal of Explosives & propellants,2001(4):41-42,45[7]陈网桦,果宏,彭金华,张春云,刘荣海.雷管空中爆炸场超压的近似估算[J].爆破器材,1998,27(1):1-3CHEN Wang-hua,GUO Hong,PENG Jin-hua,ZHANG Chun-yun,LIU Rong-hai. The approximate Calculation of the Overpressure in the Blast Field of detonator in Air[J].Explosive Materials,1998,27(1):1-3[8]陈网桦,彭金华,刘荣海,张正才,范秀琴,张国顺.雷管空中爆炸压力分布的理论计算[J].中国安全科学学报,1998,8(4):51-54CHEN Wang-hua,PENG Jin-hua,LIU Rong-hai,ZHANG Zheng-cai,FAN Xiu-qin,ZHANG Guo-shun. Theoretical Calculation for Pressure Distribution in Air-borne Blasting of the Detonator[J].China Safety Science Journal,1998,8(4):51-54[9]赵耀辉,焦清介,臧充光,刘帅.雷管输出侧向冲击波在硬纸板中传播衰减规律研究[J].火工品,2006(1):10-12ZHAO Yao-hui,JIAO Qing-jie,ZANG Chong-guang,LIU Shuai. Study on Attenuation of Detonator Shock Wave in Chipboard[J].Initiators & Pyrotechnics,2006(1)10-12[10]韩秀凤,蔡瑞娇,严楠.雷管输出冲击波在有机玻璃中传播衰减的实验研究[J].含能材料,2004,12(6):329-332HAN Xiu-feng,CAI Rui-jiao,YAN Nan. Study on Attenuation of Detonator Shock Wave in PMMA[J].Energetic Materials,2004,12(6):329-332

相似文献/References:

[1]张新梅,陈国明.安全工程专业本科毕业设计的全过程质量控制[J].中国安全生产科学技术,2011,7(1):112.
　ZHANG Xin-mei,CHEN Guo-ming.Whole process quality control of undergraduate graduation projection of safety engineering[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2011,7(9):112.
[2]张景钢,张桂英.安全工程特色专业建设研究[J].中国安全生产科学技术,2011,7(2):151.
　ZHANG Jing gang,ZHANG Gui ying.Research on construction of safety engineering characteristic specialty[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2011,7(9):151.
[3]孙晓雷,杨英丽,牛金成.专业认证与安全工程本科教育[J].中国安全生产科学技术,2011,7(3):78.
　SUN Xiao-lei,YUANG Ying-li,NIU Jin-cheng.Study on professional accertification and safety engineering undergraduate education[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2011,7(9):78.
[4]张洪杰,向晓东,陈旺生.安全工程专业教学方法改革与创新型人才培养[J].中国安全生产科学技术,2011,7(6):172.
　ZHANG Hong-jie,XIANG Xiao-dong,CHEN Wang-sheng.Safety Engineering Teaching Methods Reform and Innovation Talents Training[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2011,7(9):172.
[5]魏连江,王德明,陈开岩.《矿井通风与安全》课程设计教学模式研究与改革[J].中国安全生产科学技术,2011,7(7):163.
　WEI Lian-jiang,WANG De-ming,CHEN Kai-yan.Teaching Research and Reform of Mine Ventilation and Safety Course Design[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2011,7(9):163.
[6]王桂芬,张宪立,阎卫东,等.建筑物火灾中人员行为EXODUS模拟的研究[J].中国安全生产科学技术,2011,7(8):67.
　WANG Gui-fen,ZHANG Xian-li,YAN Wei-dong.Building fire behavior modeling of EXODUS[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2011,7(9):67.
[7]刘鹏刚,杨振宏,杨宏刚,等.安全工程本科专业实习基地建设探讨[J].中国安全生产科学技术,2011,7(9):186.
　Liu Peng-gang,Yang Zhen-hong,YangHong-gang,et al.The dilemma and solving ways of safety engineering practice base on large-scale engineering[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2011,7(9):186.
[8]张树川,刘健.安全工程专业课程体系优化研究[J].中国安全生产科学技术,2012,8(4):195.
　ZHANG Shu chuan,LIU Jian.Study on optimization of safety engineering course system[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2012,8(9):195.
[9]王凯,李珊,潘侠,等.我国安全工程专业高等教育发展现状分析[J].中国安全生产科学技术,2012,8(5):169.
　WANG Kai,LI Shan,PAN Xia,et al.Analysis on current situations of the development for higher education of safety engineering discipline in China[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2012,8(9):169.
[10]王雨.专业认证框架下安全工程专业课程体系 改革探索与实践[J].中国安全生产科学技术,2012,8(5):173.
　WANG Yu.Exploration and practice of curricula system setting of safety engineering specialtyunder the framework of professional certification[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2012,8(9):173.

备注/Memo

备注/Memo:
收稿日期：2011-03-05
作者简介：侯海周，博士研究生。
通讯作者：胡毅亭，博士，讲师。
更新日期/Last Update: