|本期目录/Table of Contents|

[1]刘 勇,徐志胜,颜 龙.滑石粉对阻燃聚丙烯土工格栅性能的影响[J].中国安全生产科学技术,2014,10(2):131-135.[doi:10.11731/j.issn.1673-193x.2014.02.022]
　LIU Yong,XU Zhi sheng,YAN Long.Influence of talc on flame retardant grid of PP[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2014,10(2):131-135.[doi:10.11731/j.issn.1673-193x.2014.02.022]
点击复制

滑石粉对阻燃聚丙烯土工格栅性能的影响
分享到：

《中国安全生产科学技术》[ISSN:1673-193X/CN:11-5335/TB]

卷:
10
期数:
2014年2期
页码:
131-135
栏目:
职业安全卫生管理与技术
出版日期:
2014-02-28

文章信息/Info

Title:
Influence of talc on flame retardant grid of PP
作者:
刘 勇; 徐志胜; 颜 龙
(中南大学 防灾科学与安全技术研究所，湖南 长沙 410075)
Author(s):
LIU Yong;  XU Zhi sheng;  YAN Long
(Institute of Disaster Prevention Science and Safety Technology, Central South University, Changsha Hunan 410075, China)
关键词:
聚丙烯; 滑石粉; 格栅; 阻燃性能; 力学性能; 熔融特
Keywords:
polypropylene;  talc;  grid;  flame retardancy;  mechanical properties;  melting properties
分类号:
TQ325.1+4
DOI:
10.11731/j.issn.1673-193x.2014.02.022
文献标志码:
A
摘要:
将滑石粉加入聚丙烯阻燃格栅料中制成聚丙烯阻燃土工格栅材料，并探讨滑石粉对阻燃格栅的力学性能、熔融指数、燃烧性能、热稳定性和结晶性能的影响。结果表明：滑石粉的加入能提高阻燃格栅的熔融指数和结晶度，但对力学性能和阻燃性能有负面影响。与未添加滑石粉的阻燃格栅相比，添加5%wt的滑石粉后，阻燃格栅的断裂伸长率下降了9633%，峰值热释放速率和总释放热分别增加了4736%和2164%；当滑石粉添加量进一步增加到10%wt时，阻燃格栅的阻燃性能略有提高，但断裂伸长率却下降了975%。热重和差热分析表明，阻燃格栅阻燃性能的下降与热稳定性下降有关，而熔融指数提高则与α晶型熔点下降有关
Abstract:
The flame retardant grid material was prepared by adding bromine flamed retardants and talc into polypropylene(PP). The flame retardancy, mechanical properties, melt index, thermal stability and crystallization behaviors of the grids were evaluated. The results showed that the flame retardant grid of PP containing talc improves the melt index and crystallinity, but the flame retardancy and mechanical properties are reduced. With the addition of 5%talc by mass to the flame retarded grid, the elongation at break, peak heat release rate and total heat release are reduced greatly by 9633%, 4736% and 3164% respectively. The flame retardancy of flame retarded grid containing 10% talc by mass is improved while the elongation at break is 975% down. The TG and DSC analysis of retarded grid showed that the thermal stability has impact on the flame retardancy while α crystalline melting temperature has impact on melting index.

参考文献/References:

[1] 徐日庆,王景春,等.土工合成材料应用技术［M］.北京：化学工业出版社,2005:2122
[2］ 张军,纪奎江,夏延致.聚合物燃烧与阻燃技术［M］.北京：化学工业出版社,2004:4144, 8990,124126
[3］ 颜龙,王勇,卜爱华,等.几种阻燃剂对格栅用HDPE的阻燃及协效作用研究［J］. 上海塑料, 2012(4): 1520 YAN Long, WANG Yong, BU Aihua, et a. The flame retarding and synergistic effects of several flame retardants in HDPE used for grid ［J］. Shanghai plastics, 2012,(4):1520
[4］ 刘英俊.粉体填料在塑料中应用现状及面临的问题［J］.现代化工,2001,21(12):612 LIU Yingjun.Application situation and problems in powder stuffing used in plastic industry［J］. Modern chemical industry, 2001,21(12):612
[5］ 张瑜,王建民.滑石粉改性聚丙烯的研究［J］.齐鲁石油化工,2001,29(3):175178 ZHANG Yu, WANG Jianming.Studies oil polypropylene modified by talcum［J］. Qilu Petrochemical Technology,2001,29(3):175178
[6］ Karrad S, Cuesta JML, Crespy A.Influence of a fine talc on the properties of composites with high density polyethylene and polyethylene/polystyrene blends［J］.J Mater Sci,1998,33: 453461
[7］ Weon JI,Sue HJ.Mechanical properties of talc and CaCO3reinforced highcrystallinity polypropylene composites［J］.J Mater Sci,2006,(41): 22912300
[8］ Medeiros ES, Tocchetto RS, Carvalho LH, Santos IM, Souza AG.Nucleating effect and dynamic crystallization of a poly(propylene)/talc system［J］.J Therm Anal Calorim,2001,(66): 523531
[9］ Jung WD, Morikawa J, Hashimoto T.Thermophysical properties of poly(propylene)based composite polymer［J］. J Therm Anal Calorim,2001,(64): 509519
[10］ HATTOTUWA GB, ISMAIL H, BAHARIN A. Comparison of the mechanical properties of rice husk powder filled polypropylene composites with talc filled polypropylene composites ［J］. Polymer Testing ,2002,(21)：833839
[11］ 李翔, 张军, 颜龙. 溴锑阻燃体系对βPP 结晶和阻燃性能的影响［J］. 合成树脂及塑料, 2013, 30(4): 5861 LI Xiang, ZHANG Jun, YAN Long. Effect of TBAB/Sb2O3 on crystalline properties and flame retardancy of βPP ［J］. China Synthetic Resin and Plastics, 2013, 30(4):5861
[12］ M.Avella, R.dell’Erba, E.Martuscelli, G.Ragosta. Influence of molecular mass, thermal treatment and nucleating agent on structure and fracture toughness of isotactic polypropylene［J］. Polymer, 1993, 34(14): 2951 2960〖FL)〗〖HJ〗〖HT〗〖ST〗〖WT〗〖LM〗

相似文献/References:

备注/Memo

备注/Memo:
湖南省科技厅重点资助项目(2013SK2004)
更新日期/Last Update: 2014-02-28