|本期目录/Table of Contents|

[1]纪庭超,李刚,李思琦.“2.20”鞍钢重型机械铸钢厂喷爆重大事故原因分析[J].中国安全生产科学技术,2013,9(8):110-113.[doi:10.11731/j.issn.1673-193x.2013.08.020]
　JI Ting chao,LI Gang,LI Si qi.Analysis on the "2.20" sand mold explosion accident in Anshan Steel[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2013,9(8):110-113.[doi:10.11731/j.issn.1673-193x.2013.08.020]
点击复制

“2.20”鞍钢重型机械铸钢厂喷爆重大事故原因分析
分享到：

《中国安全生产科学技术》[ISSN:1673-193X/CN:11-5335/TB]

卷:
9
期数:
2013年8期
页码:
110-113
栏目:
职业安全卫生管理与技术
出版日期:
2013-08-30

文章信息/Info

Title:
Analysis on the "2.20" sand mold explosion accident in Anshan Steel
文章编号:
20130820
作者:
纪庭超; 李刚; 李思琦
(东北大学 火灾与爆炸防治实验室，辽宁沈阳110819)
Author(s):
JI Tingchao;  LI Gang;  LI Siqi
(Fire & Explosion Protection Laboratory, Northeastern University, Shenyang Liaoning 110004, China)
关键词:
铸造; 渗水; 蒸汽爆炸; 事故
Keywords:
casting;  saturated water;  vapor explosion;  accident
分类号:
X928
DOI:
10.11731/j.issn.1673-193x.2013.08.020
文献标志码:
A
摘要:
2012年2月20日鞍钢重型机械制造有限公司铸钢厂发生了一起中国有史以来最严重的砂型喷爆事故，事故现场造成13人死亡，6人重伤，11人轻伤。通过现场勘查和调阅监控录像，对该起事故发展过程进行了详细分析。认为可能的原因是地坑防水层失效，墙壁裂纹渗水导致砂床底部积水，在钢液浇注后，积水遇熔融钢水迅速汽化，蒸汽急剧膨胀，压力骤增 ，导致了喷爆事故。利用能量守恒定律，近似推算了喷爆事故所需水量，进一步证明由于少量渗水导致该起事故的可能性
Abstract:
A most serious sand mold explosion accident in Chinese history occurred in steelcasting plant of Heavy Machinery Co.Ltd., Anshan Iron and Steel Group on Feb 20th ,2012 Thirteen workers have been killed, six seriously injured and eleven slightly wounded at the accident site.A detailed analysis of the accident was conducted based on the investigation and the monitoring video materials. This accident might be caused directly by the failure of the waterproof layer on the wall of the casting pit, which lead to the deposit of water in the casting bed at the bottom of the pit. A great deal of vapor generated when the water met the molten steel and the steam pressure under the mold cavity increased sharply, which turned over the sand box and the casting die. The amount of needed water was estimated using the traditional energy conservation equation and, furthermore, the probability of a little water seepage causing this accident was further proved.

参考文献/References:

[1]董华晨.中国铸造产业的现状及其战略选择研究［D］.武汉理工大学，2006
[2］麦克尔，施华德．20052050铸造的繁荣时期——予中国铸造行业经营者的启示［J］．铸造技术，2005,（8）：659663 Michael. Inspirations for Chinese foundry industry operators during 20052050［J］. Foundry Technology, 2005,（8）：659663
[3］沈剑峰．影响铸造业发展的几大软肋［J］．中国铸造装备与技术，2004,（6）：6163 SHEN Jianfeng.A few weakness affecting development of foundry industry［J］. China Foundry Machinery & Technology,2004,（6）：6163
[4］赵华．“8．19”铝液外溢爆炸重大事故原因分析［J］．现代职业安全，2008,（5）：7375 ZHAO Hua. Analysis of “8．19” Aluminum fluid leak explosion［J］. Modern Occupational Safety, 2008,（5）：7375
[5］王淑兰.物理化学［M］.北京：冶金工业出版社，2007：25，43
[6］张维业.砂型铸造的呛火与爆炸［J］.工业安全与防尘，1995，(10)：1314 ZHANG Weiye.Choking explosion during sand casting［J］.Industry Safety and Dust Prevention. 1995，(10)：1314
[7］于家茂，薛修治，金广明.铸钢件生产指南［M］.北京：化学工业出版社，2008
[8］崔克清.安全工程燃烧爆炸理论与技术［M］.北京：中国计量出版社，2005
[9］ Taleyarkhan, RP (Taleyarkhan, RP). 核工业与非核工业蒸汽爆炸的研究［J］. 核工程与设计, 2005, 235(1012): 10611077 Taleyarkhan, RP (Taleyarkhan, RP). Vapor explosion studies for nuclear and nonnuclear industries［J］. Nuclear Engineering and Design, 2005, 235(1012): 10611077
[10］ RUSSELL A O, RAMIREZ J C, SUZANNE A S. 能量分析的方法计算沸腾液体蒸汽云爆炸的爆炸能量［J］.过程安全进展, 2012, 31(1): 5154 RUSSELL A O, RAMIREZ J C, SUZANNE A S. Calculating the explosion energy of a boiling liquid expanding vapor explosion using exergy analysis［J］. Process Safety Progress, 2012, 31(1): 5154

相似文献/References:

[1]陈伯辉,沈斐敏.基于FTA的运营隧道衬砌渗水原因分析及预防[J].中国安全生产科学技术,2014,10(3):134.[doi:10.11731/j.issn.1673-193x.2014.03.023]
　CHEN Bo hui,SHEN Fei min.Cause analysis and prevention of water seepage in operational tunnel lining based on FTA[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2014,10(8):134.[doi:10.11731/j.issn.1673-193x.2014.03.023]
[2]沈正祥,陈虎,王杜,等.铸造工艺中蒸汽爆炸事故形成机制分析[J].中国安全生产科学技术,2018,14(5):150.[doi:10.11731/j.issn.1673-193x.2018.05.022]
　SHEN Zhengxiang,CHEN Hu,WANG Du,et al.Analysis on formation mechanism of steam explosion accident in casting process[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2018,14(8):150.[doi:10.11731/j.issn.1673-193x.2018.05.022]

备注/Memo

备注/Memo:
国家自然科学基金项目（51074041，51004026）
更新日期/Last Update: 2013-09-11