|本期目录/Table of Contents|

[1]付永刚,李英明,张瀚.大采高仰斜工作面玻璃纤维增强塑料锚杆煤壁加固技术及应用[J].中国安全生产科学技术,2013,9(6):5-10.[doi:10.11731/j.issn.1673-193x.2013.06.001]
　FU Yong gang,LI Ying ming,ZHANG Han.Coal wall reinforcing technology and its application with FRP bolts in the rise mining with great mining height[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2013,9(6):5-10.[doi:10.11731/j.issn.1673-193x.2013.06.001]
点击复制

大采高仰斜工作面玻璃纤维增强塑料锚杆煤壁加固技术及应用
分享到：

《中国安全生产科学技术》[ISSN:1673-193X/CN:11-5335/TB]

卷:
9
期数:
2013年6期
页码:
5-10
栏目:
学术论著
出版日期:
2013-06-30

文章信息/Info

Title:
Coal wall reinforcing technology and its application with FRP bolts in the rise mining with great mining height
作者:
付永刚1; 李英明2; 张瀚2
（1山西寿阳段王煤业集团有限公司 段王煤矿, 山西晋中045400；2安徽理工大学 能源与安全学院, 安徽淮南232001）
Author(s):
FU Yong gang 1; LI Ying ming 2; ZHANG Han 2
(1 Duanwang Mine, Shanxi Shouyang Duanwang Coal Group Corporation Limited, Jinzhong Shanxi 045400,China; 2School of Energy and security, Anhui University of Science and Technology, Huainan Anhui 232001,China)
关键词:
综采工作面; 仰斜开采; 煤壁片帮; 玻璃纤维增强塑料锚杆
Keywords:
fully mechanized coal face;  rise mining;  rib spalling;  FRP bolt
分类号:
X913.3
DOI:
10.11731/j.issn.1673-193x.2013.06.001
文献标志码:
A
摘要:
针对段王矿090502综采工作面存在近200m仰采段，为提高煤壁稳定性，避免或减少煤壁片帮发生，提出玻璃纤维增强塑料锚杆煤壁加固方案，通过数值模拟方法对煤壁加固参数进行了优化研究，并进行了现场应用。研究结果表明：采用20mm×30m全螺纹玻璃纤维增强塑料锚杆、间排距为15m×1m进行煤壁加固，不仅可保持煤壁稳定，而且施工方便，保证了工作面的正常回采。
Abstract:
Aiming at the fact that rise mining distance is 200m long in the fully mechanized face 090502 of Duanwang mine, in order to improve the stability of coal wall and avoid or diminish rib spalling, a project of using FRP bolts to strengthen coal wall in the working face was proposed. Coal wall reinforced parameters were optimized by numerical simulation and the optimal project was used. Research results showed that 20mm×30m whole screw GFRP bolt with row & line 15m×1m space could be used to strengthen the coal wall, which not only can maintain coal wall stability, but also is very easy to construct. The project ensure the normal extraction of working face.

参考文献/References:

[1]李文昌,段文军. 综采工作面大倾角破碎顶板片帮冒顶防治技术［J］. 煤炭科学技术, 2008,36(2):68 LI Wenchang, DUAN Wenjun. Prevention and control technology for spalling and failing of high inclined broken roof in fully mechanized mining face ［J］. Coal Science and Technology, 2008,36(2):68.
[2］马金录.走向长壁放顶煤回采工作面仰采区域安全开采的探讨［J］.煤炭技术,2006,25(10):2526 MA Jinlu. Alignment grows wall to put coal back work face to adopt regional security to mine of study ［J］. Coal Technology, 2006,25(10):2526.
[3］崔景昆,赵晋泽,张学峰.大倾角仰斜综采工艺在郭二庄矿的应用［J］.河北工程大学学报 (自然科学版),2008,25(3):9294 CUI Jingkun, ZHAO Jinze, ZHANG Xuefeng. Application of the large tilt angle compound mining in Guoerzhuang coal mine［J］. Journal of Hebei University of Engineering(Natural Science Edition), 22008,25(3):9294.
[4］宋建江,耿香红,杨桂彬.综采工作面大倾角俯采及仰采工艺的开采实践［J］. 煤炭技术,2008,27(12):4244 SONG Jianjiang, GENG Qiuhong, YANG Guibin. Fullyface steep yangprone mining and the exploitation of mining practice［J］. Coal Technology, 2008,27(12):4244.
[5］林东才, 耿献文.大倾角煤层倾斜长壁仰斜开采问题分析及技术措施［J］.煤炭科学技术,2001,29(7):12 LIN Dongcai, GENG Xianwen. Issue analysis and technical measures for updip mining of overhand longwall face in deep inclined seam［J］. Coal Science and Technology, 2001,29(7):12.
[6］石建文,郑粉兔.大倾角仰斜开采存在的问题及对策［J］. 煤炭工程师, 1998,(2):4648 SHI Jianwen, ZHENG Fentu. Issue and technical measures for the rise mining with great mining height［J］. Coal Engineer, 1998,(2):4648.
[7］宫培发，孔德山. 三软煤层综采工作面煤壁加固技术［J］. 煤炭技术, 2003,(2):4142 GONG Peifa, KONG Deshan. Wall strengthen technology at combined mining face in three soft seam［J］. Coal Technology, 2003,(2):4142.
[8］王建军,曹耀丰.倾斜长壁仰斜综采的实践研究［J］. 矿山压力与顶板控制, 1995,(1):2930 WANG Jianjun, CAO Yaofeng. Practice analysis of incline longwall and fully Mechanized mining ［J］.Ground Pressure and Strata Control, 1995,(1):2930.
[9］郭珑，王军，黄志彬. 综放工作面煤壁加固技术研究与应用［J］. 煤炭科技, 2006,(4):13 GUO Long, WANG Jun, HUANG Zhibing. Study and application of reinforcement technique of Coal wall in fully Mechanized mining face［J］. Coal Science &Technology Magazine, 2006,(4):13.
[10］李英明. 玻璃纤维增强塑料锚杆尾部失效机理及尾部新结构研究［D］. 北京：中国矿业大学（北京），2007.

相似文献/References:

[1]许平贵,郭万英.综采搬家新技术与装备研究[J].中国安全生产科学技术,2011,7(11):111.
　XU Ping-gui,GUO Wan-ying.Study on new technology and equipment for moving of fully-mechanized mining[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2011,7(6):111.
[2]赵恩彪.采煤工作面粉尘浓度分布及传感器的部署[J].中国安全生产科学技术,2012,8(11):85.
　ZHAO En biao.Study on concentration of dust distribution and deployment of sensor in coal mining face[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2012,8(6):85.
[3]徐雪战,孟祥瑞,何叶荣,等.基于三维可视化与虚拟仿真技术的综采工作面生产仿真研究[J].中国安全生产科学技术,2014,10(1):26.[doi:10.11731/j.issn.1673-193x.2014.01.004]
　XU Xue zhan,MENG Xiang rui,HE Ye rong,et al.Research on virtual simulation of full mechanized mining face production based on threedimensional visualization and virtual simulation[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2014,10(6):26.[doi:10.11731/j.issn.1673-193x.2014.01.004]
[4]张文涛,吕品,孙晓梅,等.张集矿综采工作面瓦斯治理措施及效果分析[J].中国安全生产科学技术,2014,10(1):103.[doi:10.11731/j.issn.1673-193x.2014.01.017]
　ZHANG Wen-tao,LV Pin,SUN Xiao-mei,et al.Study on gas control measures and effect analysis in mechanized mining face of Zhang Ji Coal Mine[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2014,10(6):103.[doi:10.11731/j.issn.1673-193x.2014.01.017]
[5]孙建.大采高综采工作面支架选型安全性分析[J].中国安全生产科学技术,2014,10(10):148.[doi:10.11731/j.issn.1673-193x.2014.10.025]
　SUN Jian.Safety analysis of hydraulic support selection in fully-mechanized workface with large mining height[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2014,10(6):148.[doi:10.11731/j.issn.1673-193x.2014.10.025]
[6]赵晓亮,齐庆杰,葛少成,等.综采面高压注水联合高压喷雾二级防尘技术研究[J].中国安全生产科学技术,2016,12(3):30.[doi:10.11731/j.issn.1673-193x.2016.03.006]
　ZHAO Xiaoliang,QI Qingjie,GE Shaocheng,et al.Study on two stage dust suppression technology combining high pressure water injection with high pressure spray in fully mechanized coal face[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2016,12(6):30.[doi:10.11731/j.issn.1673-193x.2016.03.006]
[7]赵晓亮,齐庆杰,葛少成,等.综采面高压注水联合高压喷雾二级防尘技术研究[J].中国安全生产科学技术,2016,12(2):30.[doi:10.11731/j.issn.1673-193x.2016.03.006]
　ZHAO Xiaoliang,QI Qingjie,GE Shaocheng,et al.Study on two stage dust suppression technology combining high pressure water injection with high pressure spray in fully mechanized coal face[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2016,12(6):30.[doi:10.11731/j.issn.1673-193x.2016.03.006]
[8]彭慧天,李久超,乔金林,等.综采工作面支架接尘与喷雾降尘联合控除尘技术研究*[J].中国安全生产科学技术,2025,21(3):87.[doi:10.11731/j.issn.1673-193x.2025.03.011]
　PENG Huitian,LI Jiuchao,QIAO Jinlin,et al.Study on combined dust control and removal technology using support dust collection and spraying dust suppression in fullymechanized mining face[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2025,21(6):87.[doi:10.11731/j.issn.1673-193x.2025.03.011]

备注/Memo

备注/Memo:
安徽省自然科学基金资助项目(1208085ME72)
更新日期/Last Update: 2013-06-30