|本期目录/Table of Contents|

[1]张颖,练章华.基于Bezier曲线的特殊螺纹密封面参数化设计[J].中国安全生产科学技术,2019,15(11):24-28.[doi:10.11731/j.issn.1673-193x.2019.11.004]
　ZHANG Ying,LIAN Zhanghua.Parametric design for sealing surface of premium connection based on Bezier curve[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2019,15(11):24-28.[doi:10.11731/j.issn.1673-193x.2019.11.004]
点击复制

基于Bezier曲线的特殊螺纹密封面参数化设计
分享到：

《中国安全生产科学技术》[ISSN:1673-193X/CN:11-5335/TB]

卷:
15
期数:
2019年11期
页码:
24-28
栏目:
学术论著
出版日期:
2019-11-30

文章信息/Info

Title:
Parametric design for sealing surface of premium connection based on Bezier curve
文章编号:
1673-193X(2019)-11-0024-05
作者:
张颖; 练章华
（1.四川轻化工大学 过程装备与控制工程四川省高校重点实验室，四川 自贡 643000；
2.西南石油大学 油气藏地质及开发工程国家重点实验室，四川 成都 610500）
Author(s):
ZHANG Ying;  LIAN Zhanghua
(1.Sichuan Provincial Key Lab of Process Equipment and Control,Sichuan University of Science & Engineering,Zigong Sichuan 643000,China;
2.State Key Laboratory of Oil and Gas Reservoir Geology and Exploitation,Southwest Petroleum University,Chengdu Sichuan 610500,China)
关键词:
Beizer曲线; 特殊螺纹; 密封结构; 数值模拟
Keywords:
Bezier curve;  premium connection;  sealing structure;  numerical simulation
分类号:
X937
DOI:
10.11731/j.issn.1673-193x.2019.11.004
文献标志码:
A
摘要:
为提高油套管特殊螺纹密封性能，优化特殊螺纹密封结构，基于Bezier曲线理论方法，提出1套特殊螺纹球面对锥面密封结构参数化设计方法，并设计了1种基于Bezier曲线理论的特殊螺纹密封结构。通过数值模拟方法，对比分析新型特殊螺纹密封结构与传统球面/锥面密封结构形式密封面上接触应力分布。结果表明：基于Bezier曲线设计的特殊螺纹密封结构可提高密封面接触压力，改善螺纹接头密封区塑性区域分布，有利于提高特殊螺纹接头的抗疲劳性能，有效预防特殊螺纹接头应力腐蚀断裂，为深井、超深井油管柱螺纹接头的密封设计提供参考。
Abstract:
In order to improve the sealing performance of premium connection for the tubing and casing,and optimize the sealing structure of premium connection,a method of parametric design for the sealing structure with spherical surface to conical surface of the premium connection was put forward based on the theoretical method of Bezier curve,and a sealing structure of premium connection based on the Bezier curve theory was designed.Through the numerical simulation method,the distribution of contact stress on the sealing surface of the new sealing structure of premium connection and the traditional spherical surface/conical surface sealing structure form were compared and analyzed.The results showed that the sealing structure of premium connection based on the Bezier curve design could increase the contact pressure on the sealing surface and improve the plastic zone distribution on the sealing zone of connection joint.It is benefit for enhancing the antifatigue performance of premium connection joint,and it can effectively prevent the stress corrosion cracking of premium connection joint,which can satisfy the safe and reliable production of tubing string in the deep or ultradeep gas well.

参考文献/References:

［1］冯耀荣，韩礼红，张福祥，等.油气井管柱完整性技术研究进展与展望［J］.天然气工业，2014,34(11):73-81. FENG Yaorong,HAN Lihong,ZHANG Xiangfu,et al.Research progress and prospect of oil and gas well tubing string integrity technology ［J］.Natural Gas Industry.2014,34(11):73-81.
［2］MURTAGIANG R，FANELLI V，VILLASANTE J A,et al.Sealability of stationary metal-to-metal seals ［J］.Journal of Tribology,2004,126(3):591-596.
［3］XIE J R,MATTHEWS C.Experimental investigation of metal-to-metal seal behavior in premium casing connections for thermal wells ［C］//SPE Canada Heavy Oil Technical Conference,2017.
［4］DENNIS E,FRANCESC P R,DENNIS V H,et al.On the sealability of metal-to-metal seals with application to premium casing connections［C］//SPE Drilling international conference and exhibition,2019.
［5］高连新，金烨，张居勤.石油套管特殊螺纹接头的密封设计［J］.机械工程学报，2005，41（3）：216-220. GAO Lianxin,JIN Ye,ZHANG Juqin.Seal design of premium threaded casing connections ［J］.Chinese Journal of Mechanical Engineering，2005，41（3）：216-220.
［6］高连新，张亚勤，李飞键，等.WSP特殊螺纹接头油管的研制［J］.石油机械，2003,31(9):33-36. GAO Lianxin,ZHANG Yaqin,LI Feijian,et al.Development of WSP premium threaded connection for oil well pipes［J］.China Petroleum Machinery,2003,31(9):33-36.
［7］王建东，冯耀荣，林凯，等.特殊螺纹接头密封结构对比分析［J］.中国石油大学学报（自然科学版），2010,34(5):126-130. WANG Jiandong,FENG Yaorong,LIN Kai,et al.Comparison analysis of premium connections seal structure ［J］.Journal of China University of Petroleum(Edition Of Natural Sciences) ，2010,34(5):126-130.
［8］张永强，刘立，陆金福，等.基于API圆螺纹的气密封螺纹开发及评价［J］.天然气工业，2017，37（5）：68-75. ZHANG Yongqiang,LIU Li,LU Jinfu,et al.Development of gas-tight threads based on API round threads and its evaluation ［J］.Natural Gas Industry，2017，37（5）：68-75.
［9］张颖，练章华，周谧，等.油套管特殊螺纹密封面微观泄漏机制研究［J］.润滑与密封，2019,44(8):93-98. ZHANG Ying,LIAN Zhanghua,ZHOU Mi,et al.Research on micro-leakage mechanism of premium connection sealing surface of tubing and casing ［J］.Lubrication Engineering，2019,44(8):93-98.
［10］张颖，练章华，周谧，等.油套管特殊螺纹密封面接触应力松弛行为研究［J］.应用力学学报，2019，36（6）：1355-1361. ZHANG Ying,LIAN Zhanghua,ZHOU Mi,et al.Study on contact stress relaxation on premium connections’ sealing surface of tubing ［J］.Chinese Journal of Applied Mechanics，2019，36（6）：1355-1361.
［11］许红林，杨斌，施太和，等.球面对锥面特殊螺纹气密封性能影响因素分析［J］.西南石油大学学报（自然科学版），2017,39(6):162-166. XU Honglin,YANG Bin,SHI Taihe,et al.Analysis of factors influencing hermetic sealing performance with a spherical-conical surface and special screw threads ［J］.Journal of Southwest Petroleum University，2017,39(6):162-166.
［12］许红林.油套管特殊螺纹连接强度和密封理论研究［D］.成都：西南石油大学，2015.
［13］XU H L,YANG B,ZHANG Z,et al.Special considerations to calculate joint strength of premium connections ［J］.Journal of Petroleum Science and Engineering，2019,182:1-5.
［14］张明，丁华，刘建成.贝塞尔曲线插值下的聚焦形貌恢复［J］.机械设计与制造，2018,(9):179-181. ZHANG Ming,DING Hua,LIU Jiancheng.Shaper from focus based on Bezier curve interpolation ［J］.Machinery Design & Manufacture，2018,(9):179-181.
［15］张晓东，余世敏，龚彦，等.基于Bezier曲线的涡轮叶片参数化造型及优化设计［J］.机械强度，2015,37(2):266-271. ZHANG Xiaodong,YU Shimin,GONG Yan,et al.Modeling and optimization for turbine blades based on Bezier curve［J］.Journal of Mechanical Strength，2015,37(2):266-271.
［16］蒋睿.基于Bezier曲线法对径流式涡轮机动叶的设计［D］.重庆：重庆交通大学,2013.
［17］施法中.计算机辅助几何设计与非均匀有理B样条［M］.北京：高等教育出版社，2001.

相似文献/References:

[1]莫丽,涂炼,付强,等.油气井特殊螺纹接头连接安全性研究[J].中国安全生产科学技术,2017,13(8):126.[doi:10.11731/j.issn.1673-193x.2017.08.020]
　MO Li,TU Lian,FU Qiang,et al.Study on safety performance of premium thread joint for oil and gas wells[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2017,13(11):126.[doi:10.11731/j.issn.1673-193x.2017.08.020]

备注/Memo

备注/Memo:
收稿日期： 2019-11-01；数字出版日期： 2019-11-27
* 基金项目： 国家自然科学基金项目（51574198）；四川轻化工大学人才引进项目（2019RC17）；四川省高校重点实验室开发基金项目（GK201914）；自贡市重点科技计划项目（2019YYJC01）
作者简介： 张颖，博士，讲师，主要研究方向为机械设计及理论、油气井工程力学。
更新日期/Last Update: 2019-12-25