|本期目录/Table of Contents|

[1]莫丽,涂炼,付强,等.油气井特殊螺纹接头连接安全性研究[J].中国安全生产科学技术,2017,13(8):126-133.[doi:10.11731/j.issn.1673-193x.2017.08.020]
 MO Li,TU Lian,FU Qiang,et al.Study on safety performance of premium thread joint for oil and gas wells[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2017,13(8):126-133.[doi:10.11731/j.issn.1673-193x.2017.08.020]
点击复制

油气井特殊螺纹接头连接安全性研究
分享到:

《中国安全生产科学技术》[ISSN:1673-193X/CN:11-5335/TB]

卷:
13
期数:
2017年8期
页码:
126-133
栏目:
现代职业安全卫生管理与技术
出版日期:
2017-08-31

文章信息/Info

Title:
Study on safety performance of premium thread joint for oil and gas wells
文章编号:
1673-193X(2017)-08-0126-08
作者:
莫丽1涂炼1付强2王磊2
(1.西南石油大学 机电工程学院,四川 成都 610500;2.中海油田服务股份有限公司 油田生产事业部完井中心,天津 300459)
Author(s):
MO Li1 TU Lian1 FU Qiang2 WANG Lei2
(1. School of Mechatronic Engineering, Southwest Petroleum University, Chengdu Sichuan 610500, China; 2. Well Completion Center, Production Optimization Business Division, China Oilfield Services Limited, Tianjin 300459, China)
关键词:
特殊螺纹有限元法连接性能全尺寸试验
Keywords:
premium thread finite element method connection performance full-scale test
分类号:
TE931
DOI:
10.11731/j.issn.1673-193x.2017.08.020
文献标志码:
A
摘要:
针对油气井中API螺纹和常规特殊螺纹接头连接性能较差的问题,提出了1种新型特殊螺纹接头结构,采用有限元法,分析了该螺纹接头在上扣、拉伸、压缩、拉伸+内压、拉伸+内外压等5种工况下螺纹位移、接头接触应力和Mises应力的分布规律,研究了螺纹接头在极限载荷下的连接安全性,并通过全尺寸试验验证了有限元结果的正确性。分析和试验结果表明:在5种工况下,螺纹首尾3扣应力很大,中间段螺纹的应力分布较均匀,螺纹两端存在明显的应力集中;螺纹径向位移和轴向位移随拉伸、压缩、外压载荷的增加而增大,随内压载荷的增大而减小;极限载荷下,管体屈服而接头并未发生滑脱及泄漏现象;该螺纹接头连接强度、密封性能和抗粘扣能力达到了使用要求。
Abstract:
Aiming at the poor connection performance of the API thread joints and common premium thread joints in oil and gas wells, a new structure of premium thread joint was proposed. The distribution rules of the thread displacement, contact stress and Mises stress of the thread joint under five conditions, including make-up, tension, compression, tension with internal pressure, tension with internal pressure and external pressure, were analyzed by using the finite element method. The connection safety performance of the thread joint under the ultimate load was studied, and a full-scale test was conducted to verify the correctness of finite element analysis. The analysis and test results showed that under the five conditions, the stress of the first three teeth at both ends of the thread connection were very large, the stress distribution in the middle section of the thread was relatively uniform, and there were obvious stress concentration at both ends of the thread. The radial and axial displacement of the thread increased with the increase of tension, compression and external pressure load, and decreased with the increase of internal pressure load. In addition, the pipe yielded but the joint slippage and leakage did not take place under the ultimate load. The connection strength, sealing performance and anti-galling ability of the thread joint reached the application requirements.

参考文献/References:

[1]蔡晓闻, 高连新.我国油套管特殊螺纹接头的发展现状[J]. 焊管, 2008, 31(4):41-44. CAI Xiaowen, GAO Lianxin. Current development situation of the special thread connection for tubing/casing[J]. Welded Pipe and Tube, 2008, 31(4): 41-44.
[2]黄强. 油管螺纹损坏原因与对策[J]. 石油天然气学报, 2005, 27(4):708-717. HUANG Qiang. The damage causes of tubing thread and countermeasures[J].Journal of Oil and Gas Technology, 2005, 27(4): 708-717.
[3]袁光杰, 林元华, 姚振强, 等. API偏梯形套管螺纹连接的接触应力场研究[J]. 钢铁, 2004, 39(9):35-38. YUAN Guangjie, LIN Yuanhua, YAO Zhenqiang, et al. Research on contact stress field of API buttress casing thread connection[J]. Iron and Steel, 2004, 39(9):35-38.
[4]Takano J, Yamaguchi M, Kunishige H. Development of premium connection “KSBEAR” for withstanding high compression, high external pressure, and severe bending [J]. Kawasaki steel technical report, 2002(47):14-22.
[5]陈守俊, 高连新, 张毅, 等. 油套管螺纹联接粘扣失效过程的试验研究[J]. 华东理工大学学报(自然科学版), 2012, 38(2):247-251. CHEN Shoujun, GAO Lianxin, ZHANG Yi, et al. Experimental study of galling failure process in oil pipe threaded connection [J]. Journal of East China University of Science and Technology (Natural Science Edition), 2012, 38(2): 247-251.
[6]袁光杰, 姚振强. 油套管螺纹连接抗粘扣技术的研究现状及展望[J]. 钢铁, 2003, 38(11):66-69,14. YUAN Guangjie, YAO Zhenqiang. Recent situation and future of anti-galling technique for API round thread [J]. Iron and Steel, 2003, 38(11): 66-69,14.
[7]PAN Z Y, SONG S Y, LIU W H, et al. Cause analysis of buttress premium thread connection pullout for a well [J]. Advanced Materials Research, 2011, 37:627-632.
[8]王琍, 陈兆能, 佟德纯, 等. 套管接头螺纹滑脱失效有限元分析[J]. 北京科技大学学报, 2001, 23(2):137-139. WANG Li, CHEN Zhaoneng, TONG Dechun, et al. Finite element method simulation of failure on casing thread connection [J]. Journal of University of Science and Technology Beijing, 2001, 23(2): 137-139.
[9]陈祖志, 宋占兵, 石坤, 等.储气井螺纹连接安全性有限元模拟分析及实验研究[J]. 中国安全生产科学技术, 2012, 8(10):58-63. CHEN Zuzhi, SONG Zhanbing, SHI Kun,et al. Experimental study and finite element simulation on safety performance of gas storage wells thread joint [J]. Journal of Safety Science and Technology, 2012, 8(10): 58-62.
[10]周星. 石油套管螺纹连接性能仿真分析[D]. 东营: 中国石油大学(华东), 2009.
[11]高连新. 石油套管特殊螺纹接头的结构与性能研究[D].上海: 上海交通大学, 2005.
[12]American Petroleum Institute. Specification for threading, gauging, and thread inspection of casing, tubing, and line pipe threads: API SPEC 5B-2008[S]. Washington DC: API, 2008.
[13]Hua Z. Analysis of the load distribution in a bolt-nut connector[J]. Computers & Structures, 1994, 53(6):1465-1472.
[14]齐俊林, 罗维东, 张宏, 等.圆螺纹套管接头上扣滑脱与数值模拟[J].石油大学学报(自然科学版), 1998, 22(4):68-71. QI Junlin, LUO Weidong, ZHANG Hong, et al. Numerical Simulation of screw-on and jump-out behavior of threaded casing connections[J]. Journal of the university of petroleum china (Edition of natural science), 1998, 22(4): 68-71.
[15]Rabia H. 套管设计基础[M].华仲箎译. 北京:石油工业出版社,1995.
[16]American Petroleum Institute. Recommended practice for evaluation procedures for casing and tubing connections: API RP 5C5-2003[S]. Washington DC: API, 2003.

相似文献/References:

[1]牟易升,练章华,张强,等.扶正器对超深气井油管柱屈曲行为的影响研究[J].中国安全生产科学技术,2018,14(3):109.[doi:10.11731/j.issn.1673-193x.2018.03.016]
 MOU Yisheng,LIAN Zhanghua,ZHANG Qiang,et al.Study on influence of centralizer on buckling behavior of tubing string in ultra-deep gas well[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2018,14(8):109.[doi:10.11731/j.issn.1673-193x.2018.03.016]
[2]张颖,练章华.基于Bezier曲线的特殊螺纹密封面参数化设计[J].中国安全生产科学技术,2019,15(11):24.[doi:10.11731/j.issn.1673-193x.2019.11.004]
 ZHANG Ying,LIAN Zhanghua.Parametric design for sealing surface of premium connection based on Bezier curve[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2019,15(8):24.[doi:10.11731/j.issn.1673-193x.2019.11.004]
[3]成炜康,郑选荣,吕高,等.郑州地区双线盾构隧道开挖对桩基础内力与位移的影响[J].中国安全生产科学技术,2020,16(2):79.[doi:10.11731/j.issn.1673-193x.2020.02.013]
 CHENG Weikang,ZHENG Xuanrong,LYU Gao,et al.Influence of doubleline shield tunnel excavation on internal force and displacement of pile foundation in Zhengzhou[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2020,16(8):79.[doi:10.11731/j.issn.1673-193x.2020.02.013]

备注/Memo

备注/Memo:
国家自然科学基金项目(51604235);中海油服股份有限公司项目(E-23167010)
更新日期/Last Update: 2017-09-11