|本期目录/Table of Contents|

[1]彭慧天,李久超,乔金林,等.综采工作面支架接尘与喷雾降尘联合控除尘技术研究*[J].中国安全生产科学技术,2025,21(3):87-95.[doi:10.11731/j.issn.1673-193x.2025.03.011]
　PENG Huitian,LI Jiuchao,QIAO Jinlin,et al.Study on combined dust control and removal technology using support dust collection and spraying dust suppression in fullymechanized mining face[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2025,21(3):87-95.[doi:10.11731/j.issn.1673-193x.2025.03.011]
点击复制

综采工作面支架接尘与喷雾降尘联合控除尘技术研究*
分享到：

《中国安全生产科学技术》[ISSN:1673-193X/CN:11-5335/TB]

卷:
21
期数:
2025年3期
页码:
87-95
栏目:
学术论著
出版日期:
2025-03-31

文章信息/Info

Title:
Study on combined dust control and removal technology using support dust collection and spraying dust suppression in fullymechanized mining face
文章编号:
1673-193X(2025)-03-0087-09
作者:
彭慧天; 李久超; 乔金林; 郭立典; 张义龙; 汤澳
（1.山东科技大学 矿山灾害预防控制省部共建国家重点实验室培育基地，山东 青岛 266590；
2.山东科技大学 安全与环境工程学院，山东 青岛 266590；
3.国能神东煤炭集团有限责任公司，陕西 榆林 719315）
Author(s):
PENG Huitian;  LI Jiuchao;  QIAO Jinlin;  GUO Lidian;  ZHANG Yilong;  TANG Ao
(1.State Key Laboratory of Mining Disaster Prevention and Control Co-founded by Shandong Province and the Ministry of Science and Technology,Shandong University of Science and Technology,Qingdao Shandong 266590,China;
2.College of Safety and Environmental Engineering,Shandong University of Science and Technology,Qingdao Shandong 266590,China;
3.National Energy Shendong Coal Group Co.,Ltd.,Yulin Shaanxi 719315,China)
关键词:
综采工作面; 移架粉尘; 阻隔沉降; 数值模拟; 呼吸健康
Keywords:
fullymechanized mining face; support movement dust;  blocking-sedimentation;  numerical simulation;  respiratory health
分类号:
X936
DOI:
10.11731/j.issn.1673-193x.2025.03.011
文献标志码:
A
摘要:
为缓解现代机械化作业及大采高工作面采煤条件下液压支架移架落尘量增大、移架粉尘危害加重的难题，基于“阻隔-沉降”理念，运用支架接尘和喷雾降尘原理，通过理论分析、数值模拟、现场验证等技术方法，创新性提出湿式支架封闭控除尘方法。研究结果表明：随着喷雾压力及喷嘴孔径的增大，雾场覆盖范围及雾场质量浓度会逐渐增加，形成的雾滴粒径更小，粒径分布更集中。内部雾场在p=6 MPa，d=2.0 mm时精细雾化喷嘴形成的内部喷雾场效果最优，外部雾场在p=8 MPa，d=2.4 mm时广角实心锥形喷嘴形成的喷雾场效果最优。采用该技术后，在未开启喷雾时工作面严重污染粉尘区域已缩减约50%，降尘效率达81.01%，开启喷雾后工作面严重污染粉尘区域面积进一步缩减，降尘效率提升至93.73%，对维护一线作业工人职业健康有显著效果，可为控除尘技术研究提供参考。
Abstract:
To alleviate the problems of increased dust generation during the movement of hydraulic supports and the aggravated harm of dust during the support movement under the conditions of modern mechanized operation and coal mining in high cutting height working faces,based on the concept of “blocking-sedimentation”,and by applying the principles of dust collection by the supports and dust suppression by spraying,a wet-type support enclosure dust control and removal method was innovatively proposed through the technical methods such as theoretical analysis,numerical simulation,and field verification.The results show that with the increase of spraying pressure and nozzle diameter,the coverage range and concentration of mist field will gradually increase,and the formed mist droplets have a smaller particle size and a more concentrated particle size distribution.The internal mist fieldformed by the fine atomizing nozzle when p=6 MPa and d=2.0 mm has the best effect,and the external mist field formed by the wide-angle solid cone nozzle when p=8 MPa and d=2.4 mm has the best effect.After adopting this technology,when the spraying is not turned on,the severely polluted dust area in the working face has been reduced by approximately 50%,and the dust suppression efficiency reaches 81.01%.After the spraying is turned on,the area of the severely polluted dust area in the working face is further reduced,and the dust suppression efficiency is increased to 93.73%.This has a significant effect on maintaining the occupational health of front-line workers and can provide a reference for the research on the dust control and removal technologies.

参考文献/References:

［1］CAI X J,NIE W,YIN S,et al.An assessment of the dust suppression performance of a hybrid ventilation system during the tunnel excavation process:numerical simulation［J］.Process Safety and Environmental Protection，2021,152:304-317.
［2］LIU Q,CHENG WM,LIU LS,et al.Research on the control law of dust in the main ventilation system in excavated tunnels for cleaner production［J］.Building and Environment， 2021,205:417-434.
［3］MA Q X,NIE W,YANG S B,et al.Effect of spraying on coal dust diffusion in a coal mine based on a numerical simulation［J］.Environmental Pollution,2020,264:225-240.
［4］CHEN F,MO JM,MA W.Study on the coupling migration law of airflow-respiratory dust of an 8-m high fully-mechanized mining face［J］.Energy Exploration & Exploitation,2022,40(5):1360-1381.
［5］XIE Y,CHENG WM,YU HM,et al.Study on spray dust removal law for cleaner production at fully mechanized mining face with large mining height［J］.Powder Technology，2021,389:48-62.
［6］REN T,WANG Z,COOPER G.CFD modelling of ventilation and dust flow behaviour above an underground bin and the design of an innovative dust mitigation system［J］.Tunnelling and Underground Space Technology incorporating Trenchless Technology Research,2014,41:241-254.
［7］李晓芳.综掘工作面长压短抽式通风粉尘流场及其控制研究［D］.包头：内蒙古科技大学,2019.
［8］刘向升.综放工作面支架喷雾降尘装置的选择及优化［D］.青岛：山东科技大学,2007.
［9］NIE W,MA X,CHENG WM,et al.A novel spraying/negative-pressure secondary dust suppression device used in fully mechanized mining face:A case study［J］.Process Safety and Environmental Protection,2016，103:126-135.
［10］PENG H,NIE W,CAI P,et al.Development of a novel wind-assisted centralized spraying dedusting device for dust suppression in a fully mechanized mining face［J］.Environmental Science and Pollution Research,2019，26(4):3292-3307.
［11］PENG H,NIE W,ZHANG X,et al.Research on the blowing-spraying synergistic dust removal technology for clean environment in large-scale mechanization coal mine［J］.Fuel，2022，324:2107-2119.
［12］MO JM,MA W,LI DD,et al.Investigation on dust dispersion during support movement in a fully mechanized mining face and the technology with support frame enclosure dust control［J］.Proceedings of the Institution of Mechanical Engineers Part E-Journal of Process Mechanical Engineering，2021，235(6):2098-2108.
［13］MO JM,YANG JL,MA W,et al.Numerical simulation and field experiment study on onboard dust removal technology based on airflow-dust pollution dispersion characteristics［J］.Environmental Science and Pollution Research,2020，27(2):1721-1733.
［14］WANG PF,HAN H,LIU RH,et al.Effects of metamorphic degree of coal on coal dust wettability and dust-suppression efficiency via spraying［J］.Advances in Materials Science and Engineering,2020,2020:248-264.
［15］NIE W,CHA X P,BAO Q,et al.Study on dust pollution suppression of mine wind-assisted spray device based on orthogonal test and CFD simulation［J］.Energy,2023,263:1258-1273.
［16］ZHANG X,NIE W,PENG HT,et al.Onboard air curtain dust removal method for longwall mining:environmental pollution prevention［J］.Journal of Environmental Chemical Engineering,2021,9(6):1137-1149.
［17］FANG XM,YUAN L,JIANG BY,et al.Effect of water-fog particle size on dust fall efficiency of mechanized excavation face in coal mines［J］.Journal of Cleaner Production,2020,254:1535-1544.

相似文献/References:

[1]许平贵,郭万英.综采搬家新技术与装备研究[J].中国安全生产科学技术,2011,7(11):111.
　XU Ping-gui,GUO Wan-ying.Study on new technology and equipment for moving of fully-mechanized mining[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2011,7(3):111.
[2]赵恩彪.采煤工作面粉尘浓度分布及传感器的部署[J].中国安全生产科学技术,2012,8(11):85.
　ZHAO En biao.Study on concentration of dust distribution and deployment of sensor in coal mining face[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2012,8(3):85.
[3]付永刚,李英明,张瀚.大采高仰斜工作面玻璃纤维增强塑料锚杆煤壁加固技术及应用[J].中国安全生产科学技术,2013,9(6):5.[doi:10.11731/j.issn.1673-193x.2013.06.001]
　FU Yong gang,LI Ying ming,ZHANG Han.Coal wall reinforcing technology and its application with FRP bolts in the rise mining with great mining height[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2013,9(3):5.[doi:10.11731/j.issn.1673-193x.2013.06.001]
[4]徐雪战,孟祥瑞,何叶荣,等.基于三维可视化与虚拟仿真技术的综采工作面生产仿真研究[J].中国安全生产科学技术,2014,10(1):26.[doi:10.11731/j.issn.1673-193x.2014.01.004]
　XU Xue zhan,MENG Xiang rui,HE Ye rong,et al.Research on virtual simulation of full mechanized mining face production based on threedimensional visualization and virtual simulation[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2014,10(3):26.[doi:10.11731/j.issn.1673-193x.2014.01.004]
[5]张文涛,吕品,孙晓梅,等.张集矿综采工作面瓦斯治理措施及效果分析[J].中国安全生产科学技术,2014,10(1):103.[doi:10.11731/j.issn.1673-193x.2014.01.017]
　ZHANG Wen-tao,LV Pin,SUN Xiao-mei,et al.Study on gas control measures and effect analysis in mechanized mining face of Zhang Ji Coal Mine[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2014,10(3):103.[doi:10.11731/j.issn.1673-193x.2014.01.017]
[6]孙建.大采高综采工作面支架选型安全性分析[J].中国安全生产科学技术,2014,10(10):148.[doi:10.11731/j.issn.1673-193x.2014.10.025]
　SUN Jian.Safety analysis of hydraulic support selection in fully-mechanized workface with large mining height[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2014,10(3):148.[doi:10.11731/j.issn.1673-193x.2014.10.025]
[7]赵晓亮,齐庆杰,葛少成,等.综采面高压注水联合高压喷雾二级防尘技术研究[J].中国安全生产科学技术,2016,12(3):30.[doi:10.11731/j.issn.1673-193x.2016.03.006]
　ZHAO Xiaoliang,QI Qingjie,GE Shaocheng,et al.Study on two stage dust suppression technology combining high pressure water injection with high pressure spray in fully mechanized coal face[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2016,12(3):30.[doi:10.11731/j.issn.1673-193x.2016.03.006]
[8]赵晓亮,齐庆杰,葛少成,等.综采面高压注水联合高压喷雾二级防尘技术研究[J].中国安全生产科学技术,2016,12(2):30.[doi:10.11731/j.issn.1673-193x.2016.03.006]
　ZHAO Xiaoliang,QI Qingjie,GE Shaocheng,et al.Study on two stage dust suppression technology combining high pressure water injection with high pressure spray in fully mechanized coal face[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2016,12(3):30.[doi:10.11731/j.issn.1673-193x.2016.03.006]

备注/Memo

备注/Memo:
收稿日期： 2024-11-20
* 基金项目： 国家自然科学基金项目（52174191，52374213）；国家重点研发计划课题项目（2023YFC2509301）；中国神华能源股份有限公司神东煤炭分公司科技创新项目（E21010028501）
作者简介： 彭慧天，博士，教授，主要研究方向为灾害预防与控制、矿井通风与粉尘防治、煤矿生产职业健康防护。
通信作者： 乔金林，硕士研究生，主要研究方向为矿井通风与粉尘防治。
更新日期/Last Update: 2025-03-28