|本期目录/Table of Contents|

[1]王永龙,杜康,余在江,等.四翼内凹刻槽钻杆高效排渣钻进技术研究*[J].中国安全生产科学技术,2024,20(5):162-169.[doi:10.11731/j.issn.1673-193x.2024.05.022]
　WANG Yonglong,DU Kang,YU Zaijiang,et al.Research on efficient slag discharge drilling technology of four-wing concave groove drill rod[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2024,20(5):162-169.[doi:10.11731/j.issn.1673-193x.2024.05.022]
点击复制

四翼内凹刻槽钻杆高效排渣钻进技术研究*
分享到：

《中国安全生产科学技术》[ISSN:1673-193X/CN:11-5335/TB]

卷:
20
期数:
2024年5期
页码:
162-169
栏目:
职业安全卫生管理与技术
出版日期:
2024-05-31

文章信息/Info

Title:
Research on efficient slag discharge drilling technology of four-wing concave groove drill rod
文章编号:
1673-193X(2024)-05-0162-08
作者:
王永龙; 杜康; 余在江; 郭佳宽; 麻登辉; 赵澳琪
(河南理工大学 能源科学与工程学院，河南 焦作 454003)
Author(s):
WANG Yonglong;  DU Kang;  YU Zaijiang;  GUO Jiakuan;  MA Denghui;  ZHAO Aoqi
(School of Energy Science and Engineering,Henan Polytechnic University,Jiaozuo Henan 454003,China)
关键词:
松软煤层; 瓦斯抽采; 煤层钻进; 钻孔排渣; 内凹刻槽钻杆
Keywords:
soft coal seam;  gas drainage;  coal seam drilling;  borehole slag discharge;  concave groove drill rod
分类号:
X936
DOI:
10.11731/j.issn.1673-193x.2024.05.022
文献标志码:
A
摘要:
为解决松软煤层钻进钻孔排渣通道堵塞这一制约钻孔施工效果的关键难题，基于优化钻杆截面形状以增大排渣空间、预防钻孔堵塞这一理念，提出四翼内凹刻槽钻杆几何设计构想，通过孔内排渣阻力力学方程计算验证、钻杆排渣效果数值模拟，分析钻杆结构参数对排渣性能的影响，研制四翼内凹刻槽钻杆并在某矿进行工业性试验。研究结果表明：相较于传统圆状刻槽钻杆，四翼内凹刻槽钻杆在施工过程中具有更大的排渣空间，通过孔内沿程阻力计算对比，四翼内凹刻槽钻杆孔内沿程阻力较圆状刻槽钻杆低13%；数值模拟计算结果表明，当弧形内凹切槽对钻杆的圆心角α=35°、切入深度EF=4 mm时，渣体运移距离最大，平均运移速度最大，排渣性能最优；工业性试验表明，使用四翼内凹刻槽钻杆施工钻孔，班进尺长度和终孔深度得到显著提升。研究结果可为煤矿瓦斯抽采钻孔钻具设计提供参考。
Abstract:
In order to solve the key problem of blockage in the borehole slag discharge channel during the drilling in soft coal seams,based on the concept of optimizing the cross-sectional shape of drill rod to increase slag discharge space and prevent borehole blockage,a geometric design conception of the four-wing concave groove drill rod was proposed.Through the calculation of the mechanical equation of slag discharge resistance in the borehole and the numerical simulation of the slag discharge effect of drill rod,the influence of the structural parameters of drill rod on the slag discharge performance was analyzed.The four-wing concave groove drill rod was developed,and the industrial tests were conducted in a mine.The results show that compared to the traditional circular groove drilling rod,the four-wing concave groove drill rod has a larger slag discharge space during the construction process.Through the calculation and comparison of the on-way frictional resistance in the borehole,the on-way frictional resistance of the four-wing concave groove drill rod is 13% lower than that of the circular groove drill rod.The numerical simulation results show that when the central angle of the arc-shaped concave groove on the drill rod is 35 degrees and the cutting depth is 4 mm,the slag transportation distance and the average transportation speed are the greatest,and the slag discharge performance is the optimal.The industrial tests show that the use of four-wing concave groove drill rod for drilling significantly improves the length of per-shift drilling depth and the depth of final hole.The research results can provide reference for the design of drilling tools for gas drainage in coal mines.

参考文献/References:

［1］袁亮.我国深部煤与瓦斯共采战略思考［J］.煤炭学报,2016,41(1):1-6. YUAN Liang.Strategic thinking of simultaneous exploitation of coal and gas in deep mining［J］.Journal of China Coal Society,2016,41(1):1-6.
［2］刘志强,宋朝阳,纪洪广,等.深部矿产资源开采矿井建设模式及其关键技术［J］.煤炭学报,2021,46(3):826-845. LIU Zhiqiang,SONG Chaoyang,JI Hongguang,et al.Construction mode and key technology of mining shaft engineering for deep mineral resources［J］.Journal of China Coal Society,2021,46(3):826-845.
［3］郭志伟.我国煤矿深部开采现状与技术难题［J］.煤,2017,26(12):58-59. GUO Zhiwei.Present situation and technical difficulties of deep mining in China’s coal mine［J］.Coal,2017,26(12):58-59.
［4］徐保财.我国煤矿深部开采现状及灾害防治分析［J］.中国石油和化工标准与质量,2020,40(16):192-193.
［5］文光才,孙海涛,曹偈,等.深井煤岩瓦斯动力灾害模拟实验系统［J］.煤炭学报,2020,45(1):223-231. WEN Guangcai,SUN Haitao,CAO Jie,et al.Simulation experiment system of coal and gas dynamic disaster in deep mine and its application in accident analysis［J］.Journal of China Coal Society,2020,45(1):223-231.
［6］王永龙,裴宇翔,孙玉宁,等.孔底组合钻具瓦斯喷涌阻尼机制及工程应用［J］.煤炭学报,2023,48(9):3420-3427. WANG Yonglong,PEI Yuxiang,SUN Yuning,et al.Gas gushing damping mechanism and engineering application of bottom hole combined drilling tool［J］.Journal of China Coal Society,2023,48(9):3420-3427.
［7］欧阳习文.高瓦斯矿井本煤层钻孔瓦斯抽采工艺改进［J］.江西煤炭科技,2019(3):119-121. OUYANG Xiwen.Technical improvement on drilling gas drainage in high-gas coal seams［J］.Jiangxi Coal Science & Technology,2019(3):119-121.
［8］张学博,王豪,杨明,等.抽采钻孔失稳坍塌对瓦斯抽采的影响机制研究及应用［J］.煤炭学报,2023,48(8):3102-3115. ZHANG Xuebo,WANG Hao,YANG Ming,et al.Study and application on influence mechanism of instability and collapse of drainage borehole on gas drainage［J］.Journal of China Coal Society,2023,48(8):3102-3115.
［9］韩晓明,刘炳余,薛刘冰,等.钻杆钻进扰动下顺层瓦斯抽采钻孔孔壁失稳机制［J］.河南理工大学学报(自然科学版),2023,42(3):18-26. HAN Xiaoming,LIU Bingyu,XUE Liubing,et al.Borehole wall instability mechanism of gas drainage in-seam borehole under disturbance of drill pipe drilling［J］.Journal of Henan Polytechnic University (Nature Science),2023,42(3):18-26.
［10］王永龙,孙玉宁,刘春,等.软煤层钻进钻穴区钻屑运移动态特征及应用［J］.采矿与安全工程学报,2016,33(6):1138-1144. WANG Yonglong,SUN Yuning,LIU Chun,et al.The dynamic characteristic and application of drilling cuttings movement in “drilling cave” in soft coal seam drilling［J］.Journal of Mining & Safety Engineering,2016,33(6):1138-1144.
［11］王永龙,宋维宾,孙玉宁,等.瓦斯抽采钻孔堵塞段力学模型及其应用［J］.重庆大学学报,2014,37(9):119-127. WANG Yonglong,SONG Weibin,SUN Yuning,et al.Clogging mechanical model and its application in gas extraction borehole［J］.Journal of Chongqing University,2014,37(9):119-127.
［12］刘垒,陈二亮,刘春,等.松软煤层钻进高温闭锁及预警装置研究与应用［J］.中国安全生产科学技术,2020,16(3):68-73. LIU Lei,CHEN Erliang,LIU Chun,et al.Research and application of high-temperature locking ande early-warning device for drilling in soft coal seam［J］.Journal of Safety Science and Technology,2020,16(3):68-73.
［13］孙玉宁,王永龙,翟新献,等.松软突出煤层钻进困难的原因分析［J］.煤炭学报,2012,37(1):117-121. SUN Yuning,WANG Yonglong,ZHAI Xinxian,et al.Analysis on reasons of drilling difficulty in soft and outburst coal seam［J］.Journal of China Coal Society,2012,37(1):117-121.
［14］王永龙,翟新献,孙玉宁.刻槽钻杆应用于突出煤层钻进的合理参数研究［J］.煤炭学报,2011,36(2):304-307. WANG Yonglong,ZHAI Xinxian,SUN Yuning.Reasonable parameters study on grooved drill pipe used in drilling outburst coal seam［J］.Journal of China Coal Society,2011,36(2):304-307.
［15］王永龙,刘春,孙玉宁,等.瓦斯抽采钻孔棱状钻杆排渣原理数值模拟［J］.安全与环境学报,2015,15(4):89-93. WANG Yonglong,LIU Chun,SUN Yuning,et al.Numerical simulation on the prismatic drilling rod slagging principle in the gas drainage borehole［J］.Journal of Safety and Environment,2015,15(4):89-93.
［16］温忠党.破碎松软煤层高螺旋复合排渣定向钻进技术［J］.山东煤炭科技,2023,41(8):78-80. WEN Zhongdang.Directional drilling technology for high spiral composite slag discharge in broken soft coal seams［J］.Shandong Coal Science and Technology,2023,41(8):78-80.
［17］左伟芹,李运强,刘彦伟,等.下向钻孔水渣输运机制与高效抽采试验研究［J］.河南理工大学学报(自然科学版),2023,42(2):19-26. ZUO Weiqin,LI Yunqiang,LIU Yanwei,et al.Experimental study on water and slag transportation mechanism and high-efficiency extraction in downward boreholes［J］.Journal of Henan Polytechnic University (Natural Science),2023,42(2):19-26.
［18］陆云飞.松软煤层钻进孔内钻屑运移特征研究与应用［D］.焦作：河南理工大学,2021.

相似文献/References:

[1]李英明,杨明东,付永刚.U型工作面上隅角埋管瓦斯抽采数值模拟研究[J].中国安全生产科学技术,2013,9(12):16.[doi:10.11731/j.issn.1673-193x.2013.12.002]
　LI Ying-ming,YANG Ming-dong,FU Yong-gang.Numerical simulation on gas drainage with buried pipe in upper corner of U\|type working face[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2013,9(5):16.[doi:10.11731/j.issn.1673-193x.2013.12.002]
[2]姜二龙,刘健,蔡文鹏,等.深孔预裂爆破技术在低透气性回采工作面中的试验研究[J].中国安全生产科学技术,2013,9(7):20.[doi:10.11731/j.issn.1673-193x.2013.07.003]
　JIANG Er long,LIU Jian,CAI Wen peng,et al.Experiment study on deep hole pre-splitting blasting technology in low permeability outburst working face[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2013,9(5):20.[doi:10.11731/j.issn.1673-193x.2013.07.003]
[3]蔡文鹏,刘健,孙东生,等.顶板走向高位钻孔瓦斯抽采技术的研究及应用[J].中国安全生产科学技术,2013,9(12):35.[doi:10.11731/j.issn.1673-193x.2013.12.005]
　CAI Wen peng,LIU Jian,SUN Dong sheng,et al.Research and application of gas drainage technique with highlocated drilling method along roof strike[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2013,9(5):35.[doi:10.11731/j.issn.1673-193x.2013.12.005]
[4]孙东生,刘健,蔡文鹏,等.高瓦斯低透气性煤层水力压裂技术的试验研究[J].中国安全生产科学技术,2013,9(9):49.[doi:10.11731/j.issn.1673-193x.2013.09.009]
　SUN Dong sheng,LIU Jian,CAI Wen peng,et al.Experimental study on hydraulic fracturing technology in high gas and low permeability coal seam[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2013,9(5):49.[doi:10.11731/j.issn.1673-193x.2013.09.009]
[5]孙晓梅,吕品,刘琛琛,等.基于CFD及正交试验的工作面流场参数优化[J].中国安全生产科学技术,2014,10(4):54.[doi:10.11731/j.issn.1673-193x.2014.04.009]
　SUN Xiao mei,LV Pin,LIU Chen chen,et al.Optimization of flow field parameters in working face based on orthogonal experiment and CFD[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2014,10(5):54.[doi:10.11731/j.issn.1673-193x.2014.04.009]
[6]吴爱军,王巧莉.薛湖矿二2煤顺层钻孔瓦斯抽放的数值模拟与分析[J].中国安全生产科学技术,2014,10(6):90.[doi:10.11731/j.issn.1673-193x.2014.06.014]
　WU Ai jun,WANG Qiao li.Numerical simulation and analysis on gas extraction with bedding drillings in the 22 coal seam of Xuehu Mine[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2014,10(5):90.[doi:10.11731/j.issn.1673-193x.2014.06.014]
[7]杨明,闫潮,刘亚军.斜交高位钻孔抽采空区瓦斯设计及优化研究[J].中国安全生产科学技术,2014,10(7):117.[doi:10.11731/j.issn.1673-193x.2014.07.021]
　YANG Ming,YAN Chao,LIU Ya jun.Research and optimization of gas extraction in gob by skew high level boreholes[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2014,10(5):117.[doi:10.11731/j.issn.1673-193x.2014.07.021]
[8]戎立帆,柏发松,车志飞.下向穿层瓦斯抽采钻孔新型封孔方法及应用[J].中国安全生产科学技术,2014,10(8):64.[doi:10.11731/j.issn.1673-193x.2014.08.011]
　RONG Li-fan,BAI Fa-song,et al.New hole sealing method and application for gas extraction by downward cross-layer drilling[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2014,10(5):64.[doi:10.11731/j.issn.1673-193x.2014.08.011]
[9]徐雪战,孟祥瑞,赵光明,等.基于三维可视化的卸压区瓦斯穿层抽采仿真研究[J].中国安全生产科学技术,2014,10(9):77.[doi:10.11731/j.issn.1673-193x.2014.09.013]
　XU Xue-zhan,MENG Xiang-rui,ZHAO Guang-ming,et al.Virtual simulation of gas drainage drilling through layers in stress-relaxation zone based on three-dimensional visualization[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2014,10(5):77.[doi:10.11731/j.issn.1673-193x.2014.09.013]
[10]王文,李化敏,高保彬,等.远距离保护层开采煤层渗透特性及瓦斯抽采技术研究[J].中国安全生产科学技术,2014,10(11):84.[doi:10.11731/j.issn.1673-193x.2014.11.014]
　WANG Wen,LI Hua-min,GAO Bao-bin,et al.Study on permeability characteristic of coal seam and gas extractiontechniques in coal mining with long distance protection coal seam[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2014,10(5):84.[doi:10.11731/j.issn.1673-193x.2014.11.014]

备注/Memo

备注/Memo:
收稿日期： 2023-12-25
* 基金项目： 国家自然科学基金项目(41872188)；河南省科技攻关计划项目(232102320240)；河南省高等学校重点科研项目（24A440008）
作者简介： 王永龙，博士，副教授，主要研究方向为矿井瓦斯防治与利用。
通信作者： 杜康，硕士研究生，主要研究方向为煤系气开采理论与技术。
更新日期/Last Update: 2024-05-30