[1]马冉,高建村,杨凯,等.聚乙烯粉尘爆炸研究进展[J].中国粉体技术,2017,23(6):59-63.
MA Ran,GAO Jiancun,YANG Kai,et al.Research progress of polyethylene dust explosion [J].China Powder Science and Technology,2017,23(6):59-63.
[2]尹同山.乙烯氛围下的聚乙烯热解动力学研究[D].青岛:中国石油大学(华东),2014.
[3]JIANG Y T,PAN Y,GUAN J,et al.Experimental studies on thermal analysis and explosion characteristics of superfine polystyrene powders[J].Journal of Thermal Analysis and Calorimetry,2018,131(2):1471-1481.
[4]庞磊,赵钰,杨凯,等.低密度聚乙烯粉尘云爆炸敏感性实验[J].消防科学与技术,2019,38(9):1211-1215.
PANG Lei,ZHAO Yu,YANG Kai,et al.Low density polyethylene dust cloud explosion sensitivity experiment [J].Fire Science and Technology,2019,38(9):1211-1215.
[5]李键.微纳米PMMA粉尘爆炸及泄放实验研究[D].大连:大连理工大学,2015.
[6]PANG L,ZHANG Z W,CUI S Q,et al.Experimental study of the venting characteristics of dust explosion through a vent duct[J].Journal of Loss Prevention in the Process Industries,2020,65:104144.
[7]BENEDETTO A D,RUSSO P.Thermo-kinetic modelling of dust explosions [J].Journal of Ioss Prevention in Process Industry,2007,20(4):303-309.
[8]肖国清,赵梦圆,邓洪波,等.硬脂酸粉尘爆炸特性试验研究[J].中国安全生产科学技术,2017,13(2):126-131.
XIAO Guoqing,ZHAO Mengyuan,DENG Hongbo,et al.Experimental study on the explosion characteristics of stearic acid dust [J].Journal of Safety Science and Technology,2017,13(2):126-131.
[9]梁秋悦.彩色玉米粉燃爆特性及微观表征研究[D].兰州:兰州理工大学,2021.
[10]彭于怀,黄丽媛,曹卫国,等.石松子粉尘爆炸危险性及抑爆研究[J].爆破器材,2014,43(6):16-21.
PENG Yuhuai,HUANG Liyuan,CAO Weiguo,et al.Study on explosion hazard and explosion suppression of stone pine dust [J].Explosive Materials,2014,43(6):16-21.
[11] CALVO L F,OTERO M,JENKINS B M,et al.Heating process characteristics and kinetics of sewage sludge in different atmospheres[J].Thermochimica Acta,2004,409(2):127-135.
[12]陶可通.小麦淀粉粉尘火焰传播及燃烧特性的实验研究[D].武汉:武汉理工大学,2016.
[13]ALAIN I,RODRIGUEZ A F,COVADONGA B,et al.Computational assessment of biomass dust explosions in the 20L sphere[J].Process Safety and Environmental Protection,2022,165:791-814.
[14]NFPA.Standard onexplosion protection by deflagration venting:NFPA 90[S].Quincy:NFPA Publishing Services,2007.
[15]CEN.Dust Explosion venting protective systems:EN 14491:2012[S].Brussels:CEN Publishin Services,2012.
[16]喻健良,闫兴清.高静态动作压力下粉尘爆炸泄放标准的可靠性[J].东北大学学报(自然科学版),2015,36(9):1316-1320.
YU Jianliang,YAN Xingqing.Reliability of dust explosion discharge standard under high static action pressure [J].Journal of Northeastern University (Natural Science),2015,36(9):1316-1320.
[17]郝峥,许开立,张毓媛,等.Al(OH)3对聚丙烯腈粉火焰传播特性影响研究[J].爆炸与冲击,2022,42(6):147-157.
HAO Zheng,XU Kaili,ZHANG Yuyuan,et al.Study of Al(OH)3 on the flame propagation char acteristics of polyacrylonitrile powder [J].Explosion and Shock Waves,2022,42(6):147-157.
[1]任纯力,李新光,王福利,等.湍流对粉尘云电火花点火过程的影响*[J].中国安全生产科学技术,2009,5(6):26.
REN Chun li,LI Xin guang,WANG Fu li,et al.Effect of turbulence on spark ignition process of dust cloud[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2009,5(10):26.
[2]张金锋,李艳丽,刘鑫,等.不同条件下6-APA粉体爆炸最小点火能测试研究[J].中国安全生产科学技术,2015,11(10):43.[doi:10.11731/j.issn.1673-193x.2015.10.008]
ZHANG Jin-feng,LI Yan-li,LIU Xin,et al.Study on minimum ignition energy of 6-APA powder explosion under different conditions[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2015,11(10):43.[doi:10.11731/j.issn.1673-193x.2015.10.008]
[3]王浩,张金锋,解启航,等.彩虹粉引燃危险性实验研究[J].中国安全生产科学技术,2017,13(10):169.[doi:10.11731/j.issn.1673-193x.2017.10.028]
WANG Hao,ZHANG Jinfeng,XIE Qihang,et al.Experimental study on ignition risk of rainbow powder[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2017,13(10):169.[doi:10.11731/j.issn.1673-193x.2017.10.028]
[4]逄智宏,李万兆,郭露,等.速生杨木粉尘最小点火能的实验研究[J].中国安全生产科学技术,2018,14(11):138.[doi:10.11731/j.issn.1673-193x.2018.11.022]
PANG Zhihong,LI Wanzhao,GUO Lu,et al.Experimental study on minimum ignition energy of fast grown poplar dust[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2018,14(10):138.[doi:10.11731/j.issn.1673-193x.2018.11.022]
[5]覃小玲,李晓泉.惰性粉体对蔗糖粉尘最小点火能的影响研究[J].中国安全生产科学技术,2019,15(11):72.[doi:10.11731/j.issn.1673-193x.2019.11.011]
QIN Xiaoling,LI Xiaoquan.Study on influence of inert dust on minimum ignition energy of sucrose dust[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2019,15(10):72.[doi:10.11731/j.issn.1673-193x.2019.11.011]