|本期目录/Table of Contents|

[1]朱栋,宗义江,张修峰,等.圆拱形缺陷对砂岩力学特征影响的试验研究[J].中国安全生产科学技术,2019,15(6):30-35.[doi:10.11731/j.issn.1673-193x.2019.06.005]
 ZHU Dong,ZHONG Yijiang,ZHANG Xiufeng,et al.Experimental study on influence of sandstone with dome shape defect on its mechanical characteristics[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2019,15(6):30-35.[doi:10.11731/j.issn.1673-193x.2019.06.005]
点击复制

圆拱形缺陷对砂岩力学特征影响的试验研究
分享到:

《中国安全生产科学技术》[ISSN:1673-193X/CN:11-5335/TB]

卷:
15
期数:
2019年6期
页码:
30-35
栏目:
学术论著
出版日期:
2019-06-30

文章信息/Info

Title:
Experimental study on influence of sandstone with dome shape defect on its mechanical characteristics
文章编号:
1673-193X(2019)-06-0030-06
作者:
朱栋12宗义江2张修峰2陶祥令2
(1. 中国矿业大学 力学与土木工程学院,江苏 徐州 221116;
2. 江苏建筑职业技术学院,江苏 徐州 221116)
Author(s):
ZHU Dong12 ZHONG Yijiang2 ZHANG Xiufeng2 TAO Xiangling2
(1. School of Mechanics and Civil Engineering, China University of Mining and Technology, Xuzhou Jiangsu 221116, China;
2. Jiangsu Vocational Institute of Architectural Technology, Xuzhou Jiangsu 221116, China)
关键词:
圆拱形缺陷峰值强度起裂应力破坏模式
Keywords:
dome shape defect peak intensity crack initiation stress failure mode
分类号:
X936
DOI:
10.11731/j.issn.1673-193x.2019.06.005
文献标志码:
A
摘要:
为研究含圆拱形预制缺陷砂岩的力学特征,在板状黄砂岩试样内预制了不同α值的圆拱形缺陷。采用YNS-2000型电液伺服控制试验系统和数字照相采集系统研究了不同圆拱形缺陷倾角α对黄砂岩力学特征和破坏模式的影响规律。研究结果表明:试样峰值强度、平均模量和割线模量随着α的增大呈先减小后增大再减小趋势,α=30°试样峰值强度和峰值应变均最小,α=75°试样峰值强度和应变均达到最大;预制圆拱形缺陷α对试样起裂应力、起裂位置和破坏模式均具有重要影响,随着α值的增大,试样起裂应力总体呈先减小后增大再减小趋势,当α=30°时,试样的平均起裂应力最小,其值为10.90 MPa;当α=75°时,试样的平均起裂应力最大,其值为18.91 MPa。
Abstract:
In order to study the mechanical characteristics of sandstone with the dome shape precast defecs, the dome shape defects with different α were precast in the platelike yellow sandstone samples. The influence of different dome shape defect inclination α on the mechanical characteristics and failure mode of yellow sandstone was studied by using the YNS-2000 electrohydraulic servo control test system and the digital photographic acquisition system. The results showed that the peak strength, average modulus and secant modulus of the sample presented a general trend of decreasing first, then increasing and decreasing again with the increase of α. The peak strength and peak strain of the sample were both the minimum when α=30°, and they were both the maximum when α=75°. The inclination α of precast dome shape defect had an important influence on the crack initiation stress, crack initiation position and failure mode. With the increase of α, the crack initiation stress of the sample generally decreased first, then increased and decreased again. The average crack initiation stress of the sample was the minimum as 10.90 MPa when α=30°, and it was the maximum as 18.91 MPa when α=75°.

参考文献/References:

[1]李克钢,王庭,秦庆词,等.主、次裂隙对岩石变形破坏机制的影响研究[J].中国安全生产科学技术,2019,15(2):181-186. LI Kegang,WANG Ting,QIN Qingci,et al.Study on influence of primary and secondary fractures on deformation and failure mechanism of rock[J].Journal of Safety Science and Technology,2019,15(2):181-186.
[2]靳瑾,曹平,蒲成志.预制裂隙几何参数对类岩材料破坏模式及强度的影响[J]. 中南大学学报(自然科学版), 2014,45(2):529-535. JIN Jin, CAO Ping, PU Chengzhi. Influence of flaw parameters on damage mode and strength of rock-like materials[J]. Journal of Central South University(Natural Science Edition), 2014, 45(2):529-535.
[3]郑文翔,赵延林,王敏.单轴压缩条件下预制裂隙类岩石材料实验研究[J]. 湖南科技大学学报(自然科学版), 2013, 28(4): 1-6. ZHENG Wenxiang, ZHAO Yanlin, WANG Min. Experimental study on rock-like material with pre-cracks under uniaxial compression[J]. Journal of Hunan University of Science and Technology(Natural Science Edition), 2013, 28(4): 1-6.
[4]李术才,李廷春,王刚,等.单轴压缩作用下内置裂隙扩展的CT扫描试验[J]. 岩石力学与工程学报, 2007, 26(3): 484-492. LI Shucai, LI Tingchun, WANG Gang, et al. CT real-time scanning tests on rock specimens with artificial initial crack under uniaxial conditions[J]. Chinese Journal of Rock Mechanics and Engineering, 2007, 26(3):484-492.
[5]NEMAT-NASSER S, HORII H. Compression‐induced nonplanar crack extension with application to splitting, exfoliation, and rockburst[J]. Journal of Geophysical Research Solid Earth, 1982, 87(8):6805-6821.
[6]WONG R H C, CHAU K T, TANG C A, et al. Analysis of crack coalescence in rock-like materials containing three flaws—Part I: experimental approach[J]. International Journal of Rock Mechanics and Mining Sciences, 2001,38(7): 909-924.
[7]WONG R H C, CHAU K T. Crack coalescence in a rock-like material containing two cracks[J]. International Journal of Rock Mechanics and Mining Sciences, 1998, 35(2): 147-164.
[8]杨圣奇.断续三裂隙砂岩强度破坏和裂纹扩展特征研究[J].岩土力学,2013, 34(1): 31-39. YANG Shengqi. Study of strength failure and crack coalescence behavior of sandstone containing three pre-existing fissures[J]. Rock and Soil Mechanics, 2013, 34(1):31-39.
[9]熊飞,靖洪文,苏海健,等.尖端相交裂隙砂岩强度与破裂演化特征试验研究[J].煤炭学报, 2017, 42(4):886-895. XIONG Fei, JING Hongwen, SU HaiJian, et al. Strength and fracture behaviors of sandstone samples containing intersect fissures under uniaxial compression[J]. Journal of China Coal Society, 2017, 42(4):886-895.
[10]MA G W, DONG Q Q, FAN L F, et al. An investigation of non-straight fissures cracking under uniaxial compression[J]. Engineering Fracture Mechanics, 2018,191:300-310.
[11]李世愚,和泰名,尹祥础.岩石断裂力学[M].北京:科学出版社,2015.

相似文献/References:

备注/Memo

备注/Memo:
收稿日期: 2019-04-24;数字出版日期: 2019-06-28
* 基金项目: 江苏省高等学校自然科学研究面上项目(17KJB440003, KJB580014);江苏省自然科学基金项目(BK20160208)
作者简介: 朱栋,博士研究生,讲师,主要研究方向为深部围岩稳定性控制及理论等。
更新日期/Last Update: 2019-07-09