[1]LARSON E D,KEOSOFF K G.Marginal Subsea Develop-ment with Existing Subsea Trees[C].//Innovation without limits / OTC .04.2004:1-5.
[2]唐文献,曹伟枫,张建,等.水下井口连接器密封结构性能分析[J].石油机械, 2016,44(3):82-87.
TANG Wenxian,CAO Weifeng,ZHANG Jian,et al. Perfo-rmance analysis of subsea wellhead connector sealing structure[J]. China Petroleum Machinery,2016,44(3):82-87.
[3]BUITRAGO J, KRISHNAN V R, SOMMERFIELD P M. Fatigue asses-smement of subsea tree connectors and weelheads[C].//ASME 2011 30th International Conference on Ocean. Offshore and Arctic Engineering, 2011(3):423-432.
[4]李志刚,运飞宏,姜瑛,等.水下连接器密封性能分析及实验研究[J].哈尔滨工程大学学报,2015,36(3):389-393.
LI Zhigang,YUN Feihong,JIANG Ying,et al. Analysis and experimental study of subsea connector’s seal performance[J].Journal of Harbin Engineering University,2015,36(3):389-393.
[5]王仁华.深海水平式卡箍连接器密封结构优化分析与性能研究[D].哈尔滨:哈尔滨工程大学,2017.
[6]梁乃章.关于透镜式密封的螺栓载荷计算[J].广西大学学报(自然科学版),1988(2):16-19.
LIANG Naizhang.The calculation with the anchor bolts of lens washer seal[J]. Journal of Guangxi University (Natural Science Edition), 1988(2):16-19.
[7]彭飞,段梦兰,王金龙,等.深水大直径连接器双重密封设计[J].润滑与密封,2014,39(3):105-109,114.
PENG Fei,DUAN Menglan,WANG Jinlong,et al. Design of double seals of deep-water large diameter connector [J]. Lubrication Engineering ,2014,39(3):105-109,114.
[8]彭飞,段梦兰,范嘉堃,等.深水连接器锁紧机构双重密封设计研究[J]. 机械设计与制造,2014(4):7-10.
PENG Fei,DUAN Menglan,FAN Jiakun,et al. Research on design scheme for double seals of the locking me-chanism for deep-water connector[J]. Machinery Design & Manufacture, 2014(4):7-10.
[9]黄小光,韩忠英.基于ABAQUS的压力容器有限元接触分析[J].石油化工设备,2011,40(2):35-39.
HUANG Xiaoguang,HAN Zhongying. Contact analysis of pressure vessel based on ABAQUS[J].Petro-chemical Equipment,2011,40(2):35-39.
[10]陈晓芳,赵宏林,罗晓兰,等.水下卧式采油树井口连接器VX钢圈力学特性研究[J].石油机械,2014,42(8):62-67.
CHEN Xiaofang,ZHAO Honglin,LUO Xiaolan,et al. Study on mechanical properties of the VX gasket of subsea horizontal christmas tree wellhead connector[J]. China Petroleum Machinery, 2014,42(8):62-67.
[11]唐亚辉.VX金属密封圈热力耦合分析及密封特性研究[D].北京:中国石油大学(北京),2016.
[12]秦桦,安晨,徐健,等.水下采油树油管悬挂器K形金属密封环密封性能模拟分析[J].中国海上油气,2017,29(5):141-148.
QIN Hua, AN Chen, XU Jian, et al.Simulation analysis of sealing performance of the K—type metal sealing ring on subsea christmas tree tubing hanger[J]. China Offshore Oil and Gas, 2017,29(5):141-148.
[13]FLITNEY R.Seals and sealing handbook[M].5th-ed.Oxford: Elsevier Science Ltd,2007: 91-92.
[14]曹金凤,石亦平.ABAQUS有限元分析常见问题解答[M].北京:机械工业出版社,2009:234-262.
[15]陈晓芳.水下采油树油管悬挂器轴向密封件设计研究[D].北京:中国石油大学(北京),2015.