[1]郭雁飞, 周建新, 陈卫红. 粉尘危害事件调查分析[J]. 中国安全生产科学技术, 2009, 5(4):80-84.
GUO Yanfei, ZHOU Jianxin, CHEN Weihong. Investigation and analysis of dust hazard incidents[J]. Journal of Safety Science and Technology, 2009, 5(4): 80-84.
[2]孙百存, 甘小根. 带式输送机转载装置的研究与应用[J]. 煤矿机械, 2009 (5):120-121.
SUN Baicun, GAN Xiaogen. Adhesive tape conveyer reprint installment research and application [J]. Coal Mine Machinery, 2009(5): 120-121.
[3]贾惠艳, 马云东. 选煤厂输煤系统转载点粉尘产出控制技术[J]. 环境污染与防治, 2007, 29(10):767-770.
JIA Huiyan, MA Yundong. Generation control techniques of coal dust of transferring points of the coal transportation system in the coal selection plant [J]. Environmental Pollution and Control, 2007, 29(10): 767-770.
[4]葛少成, 邵良杉, 齐庆杰. 选煤厂转运点除尘方案模拟优化设计[J]. 辽宁工程技术大学学报, 2007, 26(6):805-808.
GE Shaocheng, SHAO Liangshan, QI Qingjie. Simulation and optimal design of dust removal scheme of transshipment point in a coal washery [J]. Journal of Liaoning Technical University, 2007, 26 (6): 805-808.
[5]施春红,欧盛南,金龙哲.矿井粉尘运移规律性的试验研究[J]. 北京科技大学学报, 2007, 29(2): 1-5.
SHI Chunhong, OU Shengnan, JIN Longzhe. A study and analysis on the law of motion of the coal dust [J]. Journal of University of Science Technology Beijing, 2007, 29(2): 1-5.
[6]张茂宇, 贾福音. 煤矿井下粉尘监测、防治技术的现状与趋势[J]. 中国安全生产科学技术, 2011, 7 (12):188-191.
ZHANG Maoyu, JIA Fuyin. Situation and trend on dust monitoring & control technologies in underground mine [J]. Journal of Safety Science and Technology, 2011, 7(12): 188-191.
[7]王晓珍. 煤巷掘进过程中粉尘浓度影响因素分析[J]. 中国安全生产科学技术, 2011, 7(4): 75-79.
WANG Xiaozhen. Analysis of dust concentration influence factor in coal roadway driving [J]. Journal of Safety Science and Technology, 2011, 7(4): 75-79.
[8]李雨成, 李智, 高伦. 基于风流及粉尘分布规律的机掘工作面风筒布置[J]. 煤炭学报, 2014, 39(S1):130-135.
LI Yucheng, LI Zhi, GAO Lun. Arrangement of air duct in tunneling working face based on the distribution laws of airflow and dust [J]. Journal of China Coal Society, 2014, 39(S1): 130-135.
[9]张建卓, 祝天姿, 高猛, 等. 综掘面风幕集尘除尘系统的参数优化与数值模拟[J]. 中国安全科学学报, 2011, 21(4): 128-131.
ZHANG Jianzhuo, ZHU Tianzi, GAO Meng, et al. Parameter optimization and numerical simulation of dust-collecting and dedusting system with air curtain in fully mechanized excavation face [J]. China Safety Science Journal, 2011,21(4): 128-131.
[10]Yuqing FENG, TIM SWENSERSMITH, PETER J WITT, et al. CFD modeling of gas-solid flow in an internally circulating fluidized bed [J]. Powder Technology, 2012, 219: 78-85.
[11]陈举师, 蒋仲安, 姜兰. 胶带输送巷道粉尘分布及其影响因素的实验研究[J]. 煤炭学报, 2014, 39(1): 135-140.
CHEN Jushi, JIANG Zhongan, JIANG Lan. Experimental research on dust distribution and its influencing factors in belt conveyer roadway[J]. Journal of China Coal Society, 2014, 39(1): 135-140.
[12]CAMELLI F E,BYRNE G, LOHNER R.Modeling subway air flow using CFD[J]. Tunneling and Underground Space Technology, 2014,(43): 20-31.
[13]WIDIATMOJO A, SASAKI K, SUGAI Y. Assessment of air dispersion characteristic in underground mine ventilation: Field measurement and numerical evaluation[J]. Process Safety& Environmental Protection, 2015,93(13): 173-181.
[14]荆德吉, 葛少成. 闭环回旋控尘技术的三维数值模拟研究[J]. 中国安全生产科学技术, 2015, 11(3): 79-84.
JING Deji, GE Shaocheng. Study on 3D numerical simulation of closed-loop dust control technology [J]. Journal of Safety Science and Technology, 2015, 11(3): 79-84.
[15]张大明, 马云东. 输煤巷道通风排尘特征参数数值模拟优化研究[J]. 安全与环境学报, 2012, 2(1): 178-181.
ZHANG Daming, MA Yundong. New numerical simulation for optimizing the characteristic is parameters of ventilation dedusting in the coal conveyer roadway [J]. Journal of Safety and Environment, 2012, 12(1): 178-181.
[1]高飞,王平利,施春华.通风除尘系统在家具企业职业危害防治中的应用[J].中国安全生产科学技术,2012,8(12):161.
GAO Fei,WANG Ping li,SHI Chun hua.The application of ventilation dust removal system in furniture enterprise for occupational hazards prevention and control[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2012,8(4):161.
[2]李刚,王运敏,金龙哲.金属矿山掘进巷道新型通风除尘系统研究与应用[J].中国安全生产科学技术,2019,15(8):77.[doi:10.11731/j.issn.1673-193x.2019.08.012]
LI Gang,WANG Yunmin,JIN Longzhe.Research and application of new ventilation and dust removal system in tunneling roadway of metal mine[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2019,15(4):77.[doi:10.11731/j.issn.1673-193x.2019.08.012]