|本期目录/Table of Contents|

[1]陈善乐,王坤,汪华君,等.近距离煤层群下行开采切眼错距确定分析[J].中国安全生产科学技术,2015,11(12):144-149.[doi:10.11731/j.issn.1673-193x.2015.12.023]
 CHEN Shan-le,WANG Kun,WANG Hua-jun,et al.Analysis on determination of alternate distance for open-off cut in downward mining of close distance coal seam group[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2015,11(12):144-149.[doi:10.11731/j.issn.1673-193x.2015.12.023]
点击复制

近距离煤层群下行开采切眼错距确定分析
分享到:

《中国安全生产科学技术》[ISSN:1673-193X/CN:11-5335/TB]

卷:
11
期数:
2015年12期
页码:
144-149
栏目:
职业安全卫生管理与技术
出版日期:
2015-12-30

文章信息/Info

Title:
Analysis on determination of alternate distance for open-off cut in downward mining of close distance coal seam group
文章编号:
1673-193X(2015)-12-0144-06
作者:
陈善乐12 王坤1 汪华君1 崔铁军23
(1.贵州工程应用技术学院,矿业工程学院,贵州 毕节 551700;2.辽宁工程技术大学,安全科学与工程学院, 阜新 辽宁 123000;3. 大连交通大学, 辽宁省隧道与地下结构工程技术研究中心, 大连 辽宁 116028)
Author(s):
CHEN Shan-le12 WANG Kun1 WANG Hua-jun1 CUI Tei-jun23
(1. College of Mining and Engineering, Guizhou University of Engineering Science, Bijie Guizhou 551700, China; 2. College of Safety Science and Engineering, Liaoning Technical University, Fuxin Liaoning 123000, China; 3. Tunnel & Underground Structure Engineering Center of Liaoning, Dalian Jiaotong University, Dalian Liaoning 116028, China)
关键词:
近距离煤层下行开采切眼错距
Keywords:
close distance coal seams downward mining open-off cut alternate distance
分类号:
X936
DOI:
10.11731/j.issn.1673-193x.2015.12.023
文献标志码:
A
摘要:
在近距离煤层群的开采中,工作面巷道位置选择直接影响其支护方式、顶底板管理等生产工作。为了得到下位煤层工作面切眼的合理位置,利用基于三维显式有限差分法的计算工具Flac3D,以矿井近距离煤层9、101、102为工程实例,分析了在近距离煤层群回采时期,下邻近层综采工作面切眼位置与上邻近层预留保护煤柱错距。结果表明,上邻近层回采后,在其因支承压力和拉张作用下的下沉盆地中岩层内,主要发生塑性变形;上覆岩层破坏范围为26m,底板破坏范围为5.6m,采空区左右两侧破坏范围3~5m;下位煤层10603工作面切眼与上位煤层9煤保护煤柱错距应大于5m。
Abstract:
The position of working face roadway directly influences its support way, roof and floor management, and other production work in mining of close distance coal seam group. In order to get the reasonable position of open-off cut in working face of the lower coal seam, the computing tools - Flac3D based on three dimensional explicit finite difference method was applied. Taking the close distance coal seams 9th, 101th, 102th as engineering examples, the alternate distance of open-off cut in the fully mechanized working face of lower adjacent coal seam to guard coal pillar in upper adjacent coal seam during the stoping period of close distance coal seam group was analyzed. The results showed that after the stoping of upper adjacent coal seam, the plastic deformation is mainly distributed in rock strata of subsidence basin under the effect of abutment pressure and tensile. The damage range of overlying strata is 26 m, the damage range of floor is 5.6m, and that in both sides of goaf is 3-5 m. The alternate distance of open-off cut in the 10603 working face of lower coal seam to guard coal pillar in 9th of upper coal seam should be greater than 5m.

参考文献/References:

[1]张百胜.极近距离煤层开采围岩控制理论及技术研究[D].太原理工大学博士学位论文,2008
[2]钱鸣高,缪协兴,许家林.岩层控制中的关键层理论研究[J].煤炭学报,1996,21(3):225-230 QIAN Ming-gao, MIAO Xie-xing, XU Jian-lin. Theoretical study of key stratum in ground control[J]. Journal of China Coal Society, 1996,21(3):225-230
[3]杨胜利,刘颢颢,李杨,等.极近距离煤层合层综放技术[J].煤炭学报,2011,36(3):371-376 YANG Sheng-li, LIU Hao-hao, LI Yang, et al. The technology on full mechanized caving with combine-layers in very contiguous seams[J]. Journal of China Coal Society, 2011,36(3):371-376
[4]孙春东,杨本生,刘超.1.0m极近距离煤层联合开采矿压规律[J].煤炭学报,2011, 36(9):1423-1428 SUN Chun-dong, YANG Ben-sheng, LIU Chao. Strata behavior regularity of 1.0 m very contiguous seams combined mining[J].Journal of China Coal Society, 2011, 36(9):1423-1428
[5]朱涛,张百胜,冯国瑞,等.极近距离煤层下层煤采场顶板结构与控制[J].煤炭学报,2010, 35(2):190-193 ZHU Tao,ZHANG Bai-sheng,FENG Guo-rui, et al. Roof structure and control in the lower seam mining field in the ultra-close multiple seams[J].Journal of China Coal Society, 2010, 35(2):190-193
[6]马立强,汪理全,张东升,等.近距离煤层群上行开采可行性研究与工程应用[J]. 湖南科技大学学报(自然科学版),2007, 22(4):1-5 MA Li- qiang, WANG Li- quan, ZHANG Dong- sheng, et al. Application and study on feasibility of near distance coal seam group ascending mining[J]. Journal of Hunan University of Science & Technology(Natural Science Edition), 2007, 22(4):1-5
[7]康健,孙广义,董长吉.近距离薄煤层同采工作面覆岩移动规律研究[J].采矿与安全工程学报,2010,27(1):51-56 KANG Jian, SUN Guang-yi, DONG Chang-ji. Overlying strata movement law of ultra-close thin coal seam adopting simultaneous mining face[J]. Journal of Mining & Safety Engineering, 2010,27(1):51-56
[8]杨启楠. 基于FLAC3D复合顶煤大断面煤巷围岩数控模拟[J]. 辽宁工程技术大学学报(自然科学版),2012,31(4):461-465 YANG Qi-nan. Numerical simulation of compound roof control at coal roadway with large cross-section based on FLAC3D[J]. Journal of Liaoning Technical University(Natural Science), 2012,31(4):461-465
[9]索永录,商铁林,郑勇,等. 极近距离煤层群下层煤工作面巷道合理布置位置数值模拟[J]. 煤炭学报,2013,38(2): 277-282 SUO Yong-lu, SHANG Tie-lin, ZHENG Yong, et al. Numerical simulation on rational location of roadways at lower seam for ultra-close multiple seam mining[J]. Journal of China Coal Society, 2013,38(2): 277-282
[10]黄艳利,张吉雄,范军,等. 近距离煤层回采巷道合理布置方案[J].煤矿安全, 2009,40(9):66-68 HUANG Yan-li, ZHANG Ji-xiong, FAN Jun, et al. Determining reasonable position of roadway for close multi-seam[J]. Safety in Coal Mines, 2009,40(9):66-68
[11]方新秋,郭敏江,吕志强. 近距离煤层群回采巷道失稳机制及其防治[J].岩石力学与工程学报,2009,28(10):2059-2067 FANG Xin-qiu, GUO Min-jiang, L Zhi-qiang. Instability mechanism and prevention of roadway under close-distance seam group minings[J]. Chinese Journal of Rock Mechanics and Engineering,2009,28(10):2059-2067
[12]谭云亮.矿山压力与岩层控制[M].北京:煤炭工业出版社,2007
[13]高延法.岩石真三轴压力试验与岩石损伤力学[M].北京:地震出版社.1999年2月
[14]周维垣,杨强.岩石力学数值计算方法[M].北京:中国电力出版社.2005年11月
[15]唐治,潘一山,阎海鹏,等.急倾斜煤柱开采后对巷道影响的数值模拟[J].中国地质灾害与防治学报,2010(6):64-67 TANG Zhi, PAN Yi-shan, YAN Hai-peng, et al. Numerical simulation about influences of steep inclined coal pillar after mining on laneway[J]. The Chinese Journal of Geological Hazard and Control, 2010(6):64-67
[16]王永秀,齐庆新,陈兵,雷毅.煤柱应力分布规律的数值模拟分析[J].煤炭科学技术,2004(10):59-62 WANG Yong-xiu, QI Qing-xin, CHEN Bing,et al. Analysis on digital simulation for stress distribution la w of coal pillar[J].Coal Science and Technology, 2004(10):59-62
[17]王月星.极近距离煤层同采合理错距研究[J].煤矿开采,2011, 16 (1):38-40 WANG Yue-xing. Research on rational separation distance of 2 mining faces in 2 extremely-near coal seams in Yangyi colliery[J].Coal Mining Technology, 2011, 16 (1):38-40
[18]黄艳利,张吉雄,范军,等.近距离煤层回采巷道合理布置方案[J].煤矿安全,2009(9):66-68
[19]王宏图,范晓刚,贾剑青,等.关键层对急斜下保护层开采保护作用的影响[J].中国矿业大学学报, 2011,40(1):23-28 WANG Hong tu,FAN Xiao gang, JIA Jian qing, et al. Effects of key strata on protection when exploit-ting a steep-incline underlying aprotecting stratum[J].Journal of China University of Minging&Technology,2011,40(1):23-28
[20]张百胜,杨双锁,康立勋,等.极近距离煤层回采巷道合理位置确定方法探讨[J].岩石力学与工程学报, 2008,27(1):97-101 ZHANG Bai-sheng, YANG Shuang-suo, KANG Li-xun,et al. Discussion on method for determining reasonable position of roadway for ultra close multi-seam[J].Chinese Journal of Rock Mechanics and Engineering, 2008,27(1):97-101

相似文献/References:

[1]陈善乐,汪华君,崔铁军.近距离煤层大断面切眼支护稳定周期分析[J].中国安全生产科学技术,2014,10(8):28.[doi:10.11731/j.issn.1673-193x.2014.08.005]
 CHEN Shan-le,WANG Hua-jun,CUI Tie-jun.Stable period analysis of large section open-off cut support in close coal seam[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2014,10(12):28.[doi:10.11731/j.issn.1673-193x.2014.08.005]
[2]赵云佩.近距煤层无煤柱协调开采布局研究与应用*[J].中国安全生产科学技术,2020,16(8):131.[doi:10.11731/j.issn.1673-193x.2020.08.021]
 ZHAO Yunpei.Research and application of coordinated mining layout without coal pillars in close coal seams[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2020,16(12):131.[doi:10.11731/j.issn.1673-193x.2020.08.021]

备注/Memo

备注/Memo:
贵州省科学技术基金项目(LKB[2012]03);校级重点支持学科(矿业工程)项目;贵州省重点支持学科(采矿工程)项目
更新日期/Last Update: 2016-01-25