|本期目录/Table of Contents|

[1]王海桥,等.独头巷道受限贴附射流有效射程的 理论研究与数值计算[J].中国安全生产科学技术,2015,11(11):41-45.[doi:10.11731/j.issn.1673-193x.2015.11.007]
 WANG Hai-qiao,CHEN Shi-qiang,et al.Theoretical research and numerical calculation of effective range for restrained wall-attached jet flow in heading face[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2015,11(11):41-45.[doi:10.11731/j.issn.1673-193x.2015.11.007]
点击复制

独头巷道受限贴附射流有效射程的 理论研究与数值计算
分享到:

《中国安全生产科学技术》[ISSN:1673-193X/CN:11-5335/TB]

卷:
11
期数:
2015年11期
页码:
41-45
栏目:
学术论著
出版日期:
2015-11-30

文章信息/Info

Title:
Theoretical research and numerical calculation of effective range for restrained wall-attached jet flow in heading face
文章编号:
1673-193X(2015)-11-0041-05
作者:
王海桥1 2陈世强1 2李轶群1
1. 湖南科技大学 能源与安全工程学院,湖南 湘潭 411201; 2. 湖南省矿山通风与除尘装备工程技术研究中心,湖南 湘潭 411201
Author(s):
WANG Hai-qiao1 2 CHEN Shi-qiang1 2 LI Yi-qun1
1. School of Mining and Safety Engineering, Hunan University of Science and Technology, Xiangtan Hunan 411201, China; 2. Hunan Provincial Engineering Techniques Research Centre of Mine Ventilation & Dedusting Equipment, Xiangtan Hunan 411201, China
关键词:
独头巷道受限贴附射流有效射程受限程度数值计算
Keywords:
heading face restrained wall-attached jet flow effective range restrained degree numerical calculation
分类号:
X936
DOI:
10.11731/j.issn.1673-193x.2015.11.007
文献标志码:
A
摘要:
为了探讨独头巷道受限贴附射流通风有效射程,利用巷道断面面积与风筒出流射流直径,定义了独头巷道射流的受限程度,采用理论分 析与数值计算方法,推导了受限射流无因次距离与沿程断面位置、断面流量和断面平均流速之间的关系式,建立了独头巷道受限贴附射流流动 特性模型。利用该模型,开展了8个不同工况下受限贴附射流的数值计算。结果表明,在受限的情况下,射流区无因次最大截面积出现在无因次 距离为0.200 0处,而无因次最大截面流量位于无因次距离为0.187 5处。理论推导和计算结果表明,所得模型和计算方法能更为准确预测受限 贴附射流的有效射程。
Abstract:
In order to discuss the effective range for restrained wall-attached jet flow in heading face, the restrained degree of jet flow in a heading face was defined by using the sectional area of heading face and the diameter of jet flow at the outlet of air duct. Through theoretical analysis and numerical calculation, the relation of dimensionless distance with sectional position, sectional flow rate and sectional average velocity along the jet flow was deduced, and a model of flow characteristics for restrained wall-attached jet flow in heading face was constructed. The numerical calculation on restrained wall-attached jet flow under 8 different conditions was conducted by using this model. The results showed that under the restrained circumstance, the maximum dimensionless sectional area in the jet flow region presented on the position with dimensionless distance as 0.2000, while the maximum dimensionless sectional flow rate presented on the position with dimensionless distance as 0.1875. It showed that the model and calculation method can predict the effective range for constrained wall-attached jet flow in heading face more accurately.

参考文献/References:

[1]张国枢. 通风安全学(第二版)[M]. 徐州: 中国矿业大学出版社, 2011
[2]国家安全生产监督管理总局. 国家煤矿安全监察局. 煤矿安全规程[S]. 2014
[3]王海桥. 独头巷道受限贴附射通风流场特性研究[D]. 中国: 中国地质大学(武汉), 2009
[4]王淑芳, 王剑波, 张丽, 等. 局部通风机调速控制系统的研究[J]. 煤炭学报, 2006, 31(6): 813-818 WANG Shu-fang, WANG Jian-bo, ZHANG Li, et al. Study on adjustment speed control system of auxiliary fan [J]. Journal of China Coal Society, 2006, 31(6): 813-818
[5]谭信荣. 岩溶地区瓦斯隧道施工关键技术研究[D]. 成都: 西南交通大学, 2010
[6]Triboix A, Marchal D. Stability analysis of the mechanism of jet attachment to walls[J]. International Journal of Heat and Mass Transfer, 2002,45(13):2769-2775
[7]Cao G, Kurnitski J, Ruponen M. Experimental investigation and modeling of the attached plane jet velocity development characteristics in the transition process in a room[J]. HVAC&R research, 2009,15(3):408-489
[8]Cao G, Kurnitski J, Ruponen M, et al. Experimental investigation and modelling of a buoyant attached plane jet in a room[J]. Applied thermal engineering, 2009,29(14):2790-2798
[9]萧震宇, 翟捷. 散流器半受限分散射流的数学模型及分析[J]. 暖通空调, 2007, 37(4): 12-14 XIAO Zhen-yu, ZHAI Jie. Mathematical model and analysis of semi-restricted dispersed jet from a diffuser [J]. Heating Ventilating & Air Conditioning, 2007, 37(4): 12-14
[10]王明波, 王瑞和. 受限湍流冲击射流的数值模拟[J]. 石油钻探技术, 2008, 36(2): 7-9 WANG Ming-bo, WANG Rui-he. Numerical simulation on turbulent flow of confined impinging jet [J]. Petroleum Drilling Techniques, 2008, 36(2): 7-9
[11]鹿存荣, 杨胜强. 长距离掘巷局部通风计算风筒中风量风压的一种新方法[J]. 中国安全生产科学技术, 2011, 7(8): 115-120 LU Cun-rong, YANG Sheng-qiang. A new method of calculating air flow and air pressure in a auxiliary ventilation in distant advancing roadway [J]. Journal of Safety Science and Technology, 2011, 7(8): 115-120
[12]陈祖云, 金波, 邬长福, 等. 局部通风风筒直径的选择[J]. 中国安全生产科学技术, 2012, 8(11): 81-84 CHEN Zu-yun, JIN Bo, WU Chang-fu, et al. Choice duct of diameter in local ventilation [J]. Journal of Safety Science and Technology, 2012, 8(11): 81-84
[13]魏润柏. 通风工程空气流动理论[M]. 北京: 中国建筑工业出版社, 1981
[14]蔡增基, 龙天渝. 流体力学泵与风机[M]. 北京: 中国建筑工业出版社, 2009
[15]Rodi W. Turbulent buoyant jets and plumes[M]. 刘兰芬, 王能家, 译. 北京: 海洋出版社, 1991
[16]Бахарев В А, Трояновский В Н. 集中送风式采暖通风设计计算原理[M]. 宋德平, 译. 北京: 中国工业出版 社, 1965
[17]陆耀庆. 实用供热空调设计手册[M]. 第二版. 北京: 中国建筑工业出版社, 2008

相似文献/References:

[1]王海桥,等.独头巷道受限贴附射流有效射程的理论研究与数值计算[J].中国安全生产科学技术,2015,11(11):41.[doi:10.11731/j.issn.1673-193x.2015.11.007]
 WANG Hai-qiao,CHEN Shi-qiang,et al.Theoretical research and numerical calculation of effective range for restrained wall-attached jet flow in heading face[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2015,11(11):41.[doi:10.11731/j.issn.1673-193x.2015.11.007]

备注/Memo

备注/Memo:
国家自然科学基金项目(U1361118); 湖南省自然科学基金项目(2015JJ2061); 湖南省教育厅资助项目(14C0425)
更新日期/Last Update: 2015-12-15