|本期目录/Table of Contents|

[1]邢保振,吴雨.三维激光扫描仪在煤矿安全生产中的应用综述[J].中国安全生产科学技术,2013,9(2):135.
　XING Bao zhen,WU Yu.Summarization on application of 3D laser scanner in coal mine production safety[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2013,9(2):135.
点击复制

三维激光扫描仪在煤矿安全生产中的应用综述
分享到：

《中国安全生产科学技术》[ISSN:1673-193X/CN:11-5335/TB]

卷:
9
期数:
2013年2期
页码:
135
栏目:
出版日期:
2013-02-28

文章信息/Info

Title:
Summarization on application of 3D laser scanner in coal mine production safety
作者:
邢保振; 吴雨
(四川九洲电器集团有限责任公司，四川成都610041)
Author(s):
XING Baozhen; WU Yu
( Sichuan Jiuzhou Electric Group Co., LTD, Chengdu Sichuan 610041, China)
关键词:
三维激光扫描仪; 煤矿; 安全生产; 应用
Keywords:
3D laser scanner;  coal mine;  production safety;  application
分类号:
TD171178
DOI:
-
文献标志码:
A
摘要:
三维激光扫描技术是从上世纪90年代开始兴起的新型非接触、主动测量技术；它克服了传统测量技术单点测量、速度慢，对测量环境要求高等缺点；采用激光扫描方式快速获取高精度的三维点云数据，受环境和时间的影响相对较小。在煤矿安全生产领域，三维激光扫描仪已经被广泛应用于三维建模、变形监测和空间结构测量、计算等，其测量速度快、精度高、操作简单等优势使得煤矿的生产安全性得以提高，在实践中取得了良好的效果。通过对国内外具体案例的分析，总结了三维激光扫描仪当前在煤矿安全生产领域中的应用方式，并对其潜在应用方向做出了展望。
Abstract:
3D laser scanning technology is a new noncontact and active measurement technique rising in 1990s. It overcomes the shortcoming of single point measurement, inefficiency and high measurement environment demanding in traditional measurement techniques. It has the advantage of quick access to the highprecision threedimensional point cloud data and relatively small effects of environment and time constraints. In the field of coal mine production safety, threedimensional laser scanner has been widely applied to threedimensional modeling, deformation monitoring and spatial structure calculations and so on. Its rapid measurement, high precision, simple operation, and other advantages improve safety of the coal mine production, and have achieved good results in practice. Through the analysis of specific cases at home and abroad, the apply styles of threedimensional laser scanner in the field of coal mine production safety were summarized. Based on these studies, the potential application direction of threedimensional laser scanner was predicted.

参考文献/References:

-

相似文献/References:

[1]江田汉.重特大事故的离散幂律分布——以煤矿事故为例[J].中国安全生产科学技术,2011,7(9):24.
　JIANG Tian-han.Discrete power-law distribution of major accidents——a case study of coalmine fatalities in China[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2011,7(2):24.
[2]郝红勋,刘纪坤,王翠霞,等.煤矿事故隐患防控技术研究[J].中国安全生产科学技术,2011,7(9):135.
　HAO Hong-xun,LIU Ji-kun,WANG Cui-xia,et al.The prevention and control technology of potential accidents in coal mine[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2011,7(2):135.
[3]刘双跃,王娟,何发龙.四元联系数对煤矿安全质量标准化的优化研究[J].中国安全生产科学技术,2012,8(12):32.
　LIU Shuang yue,WANG Juan,HE Fa long.Optimization research of coal mine safety quality standardization based on fourelement connection number model[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2012,8(2):32.
[4]李鑫,刘双跃,梁玉霞,等.煤矿隐患分类处理系统设计探讨[J].中国安全生产科学技术,2012,8(5):194.
　LI Xin,LIU Shuang yue,LIANG Yu xia,et al.Design of classification management system for hidden dangers in coal mine[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2012,8(2):194.
[5]徐宏杰,宫博,李德顺.基于集对分析法的煤矿危险性评价[J].中国安全生产科学技术,2012,8(6):86.
　XU Hong jie,GONG Bo,LI De shun.Risk assessment of coal mine based on set pair analysis[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2012,8(2):86.
[6]张鹏翔,龙祖根.贵州省煤矿瓦斯赋存规律研究[J].中国安全生产科学技术,2013,9(1):34.
　ZHANG Peng xiang,LONG Zu gen.Study on occurrence regularity of gas in the mines of Guizhou province[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2013,9(2):34.
[7]吴云,王鹏,胡小娟,等.基于遗传-BP算法的煤矿安全监控系统测试研究[J].中国安全生产科学技术,2011,7(6):72.
　WU Yun,WANG Peng,HU Xiao-juan,et al.Test Case Study of Coal Mine Safety Monitoring System Based on Genetic-BP Algorithm[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2011,7(2):72.
[8]隆泗,李基,罗芬.构建煤炭企业负责人培训考核长效机制研究[J].中国安全生产科学技术,2011,7(9):207.
　LONG Si,LI Ji,LUO Fen.Study on Creation of long-acting training and evaluation mechanism for coal mining enterprise executives[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2011,7(2):207.
[9]郭爱芳,张得清,黄晓峰,等.浅谈煤矿机械事故分析和措施[J].中国安全生产科学技术,2010,6(1):182.
　GUO Ai-fang,ZHANG De-qing,HUANG Xiao-feng,et al.Analysis and measure discussion of drilling machine accident[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2010,6(2):182.
[10]白楠,金龙哲,詹子娜.基于B/S和灰色模型的煤矿事故预测模块设计与实现[J].中国安全生产科学技术,2013,9(3):113.[doi:10.11731/j.issn.1673-193x.2013.03.20]
　BAI Nan,JIN Long zhe,ZHAN Zi na.Design and relization of coal mine accident prediction mofulr based on B/S and grey model[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2013,9(2):113.[doi:10.11731/j.issn.1673-193x.2013.03.20]

备注/Memo

备注/Memo:
-
更新日期/Last Update: 2013-02-28