[1]翟晓荣, 吴基文, 沈书豪,等. 断层带边界岩体采动应力特征相似材料模拟研究[J]. 中国安全生产科学技术, 2014(5):56-61.
ZHAI Xiaorong, WU Jiwen, SHEN Shuhao, et al. Study on similar material simulation of rock mass mining stress at fault boundary [J]. Journal of Safety Science and Technology, 2014(5):56-61.
[2]李建璞, 杨小彬, 刘伟,等. 坚硬顶板煤层一次采全高矿压显现规律研究[J]. 中国安全生产科学技术, 2013, 9(2):18-22.
LI Jianpu, YANG Xiaobin, LIU Wei, et al. Research on the strata pressure behaviors of full seam mined coal seam with rigid roof [J]. Journal of Safety Science and Technology, 2013, 9(2):18-22.
[3]赵铁锤. 全国煤矿典型水害案列与防治技术[M]. 徐州:中国矿业大学出版社,2007.
[4]刘德民, 连会青, 李飞. 煤柱挖潜开采影响下断层活化危险性研究[J]. 煤炭科学技术, 2016, 44(3):44-48.
LIU Demin, LIAN Huiqing, LI Fei. Study on danger of fault activation under potential excavation of coal pillar [J]. Coal Science and Technology, 2016, 44(3):44-48.
[5]吴基文,童宏树,童世杰,等. 断层带岩体采动效应的相似材料模拟研究[J]. 岩石力学与工程学报, 2007(S2):4170-4175.
WU Jiwen, TONG Hongshu, TONG Shijie, et al. Study on similar material for simulation of mining effect of rock mass at fault zone [J]. Chinese Journal of Rock Mechanics and Engineering, 2007(S2):4170-4175.
[6]王睿, 孟召平, 谢晓彤,等. 巨厚松散层下防水煤柱合理留设及其数值模拟[J]. 煤田地质与勘探, 2011, 39(1):31-35.
WANG Rui, MENG Zhaoping, XIE Xiaotong, et al. Waterproof coal pillar reasonable design and numerical simulation under extremely thick unconsolidated strata [J]. Coal Geology & Exploration, 2011, 39(1):31-35.
[7]易伟欣, 崔钰婕. 弱导水性断层防水煤柱的留设[J]. 河南理工大学学报(自然科学版), 2015, 34(1):46-52.
YI Weixin, CUI Yujie. Setting of waterproof coal pillar on weak water conductivity fault [J]. Journal of Henan Polytechnic University(Natural Science), 2015, 34(1):46-52.
[8]刘洋, 伍永平, 王永胜. 断层上盘防水煤柱合理宽度研究[J]. 西安科技大学学报, 2010, 30(5):523-530.
LIU Yang, WU Yongping, WANG Yongsheng. Application of curved surface fitting technology in mining subsidence prediction [J]. Journal of Xian University of Science and Technology, 2010, 30(5):523-530.
[9]施龙青, 韩进,刘同彬,等.采场底板断层防水煤柱留设研究[J]. 岩石力学与工程学报, 2005, 24(S4):5585-5591.
SHI Longqing, HAN Jin, LIU Tongbin, et al. Study on design of safety pillar against water inrush through stope sill faults [J]. Chinese Journal of Rock Mechanics and Engineering, 2005, 24(S4):5585-5591.
[10]董永, 孟祥瑞, 高召宁. 断层影响下防水煤柱留设合理宽度研究[J]. 煤炭科学技术, 2014(S1):241-243.
DONG Yong, MENG Xiangrui, GAO Zhaoning. Study on design of coal pillar rational width for prevent water-inrush under influence of fault [J]. Coal Science and Technology, 2014(S1):241-243.
[11]彭文庆, 王卫军, 李青锋. 不同断层倾角条件下防水煤柱合理宽度的研究[J]. 采矿与安全工程学报, 2009, 26(2):179-182.
PENG Wenqing, WANG Weijun, LI Qingfeng. Reasonable width of water proof coal pillar under the condition of different fault dip angles [J]. Journal of Mining& Safety Engineering, 2009, 26(2):179-182.
[12]汪锋, 许家林, 谢建林,等. 基于采动应力边界线的顶板巷道保护煤柱留设方法[J]. 煤炭学报, 2013, 38(11):1917-1922.
WANG Feng, XU Jialin, XIE Jianlin, et al. Method of designing protective coal pillar on roof roadway based on mining induced stress boundary line [J]. Journal of China Coal Society, 2013, 38(11):1917-1922.
[13]孔德中, 王兆会, 李小萌,等. 大采高综放面区段煤柱合理留设研究[J]. 岩土力学, 2014, 35(S2):460-466.
KONG Dezhong, WANG Zhaohui, LI Xiaomeng, et al. Study of reasonable width of full-mechanized top-coal caving with large mining height [J]. Rock and Soil Mechanics, 2014, 35(S2):460-466.
[14]林远东, 涂敏, 刘文震,等. 基于梯度塑性理论的断层活化机理[J]. 煤炭学报, 2012, 37(12):2060-2064.
LIN Yuandong, TU Min, LIU Wenzhen, et al. Faults activation mechanism based on gradient-dependent plasticity [J]. Journal of China Coal Society, 2012, 37(12):2060-2064.
[15]赵华安, 赵光明, 孟祥瑞. 断层影响下合理煤柱尺寸留设数值模拟分析[J]. 中国安全生产科学技术, 2014(11):27-33.
ZHAO Huawei, ZHAO Guangming, MENG Xiangrui. Numerical simulation on rational size setting of coal pillar under influence of fault [J]. Journal of Safety Science and Technology, 2014(11):27-33.
[16]高延法. 底板突水规律与突水优势面[M]. 徐州:中国矿业大学出版社,1999.
[1]崔光耀,石文昊,王明胜,等.高烈度地震区跨断层隧道不同厚度减震层减震效果分析*[J].中国安全生产科学技术,2021,17(7):130.[doi:10.11731/j.issn.1673-193x.2021.07.021]
CUI Guangyao,SHI Wenhao,WANG Mingsheng,et al.Analysis on shock absorption effect of shock-absorbing layer with different thicknesses for fault-crossing tunnels in high seismic intensity zone[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2021,17(3):130.[doi:10.11731/j.issn.1673-193x.2021.07.021]