|本期目录/Table of Contents|

[1]李雨成,周磊,刘天奇,等.局部通风机实际特性的近似处理方法及应用研究[J].中国安全生产科学技术,2016,12(6):20-24.[doi:10.11731/j.issn.1673-193x.2016.06.004]
 LI Yucheng,ZHOU Lei,LIU Tianqi,et al.Study on approximate treatment method for actual characteristics of local fan and its application[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2016,12(6):20-24.[doi:10.11731/j.issn.1673-193x.2016.06.004]
点击复制

局部通风机实际特性的近似处理方法及应用研究
分享到:

《中国安全生产科学技术》[ISSN:1673-193X/CN:11-5335/TB]

卷:
12
期数:
2016年6期
页码:
20-24
栏目:
学术论著
出版日期:
2016-06-30

文章信息/Info

Title:
Study on approximate treatment method for actual characteristics of local fan and its application
作者:
李雨成12周磊12刘天奇12李智12赵晓涛12
(1.辽宁工程技术大学 安全科学与工程学院,辽宁 阜新 123000; 2.矿山热动力灾害与防治教育部 重点实验室,辽宁 阜新 123000)
Author(s):
LI Yucheng12 ZHOU Lei12 LIU Tianqi12 LI Zhi12 ZHAO Xiaotao12
(1. College of Safety Science and Engineering, Liaoning Technical University, Fuxin Liaoning 123000, China; 2. Key Laboratory of Mine Thermo-motive Disaster and Prevention, Ministry of Education, Fuxin Liaoning 123000, China)
关键词:
局部通风特性曲线风量预测一次插值
Keywords:
local ventilation characteristic curve air volume forecast linear interpolation
分类号:
X936
DOI:
10.11731/j.issn.1673-193x.2016.06.004
文献标志码:
A
摘要:
针对目前局部风机特性曲线很难得到或应用而导致局部通风研究受限问题,提出一种根据局部风机风量及风压范围近似求解风机特性曲线的方法。该方法采用一次线性插值函数代替风机特性曲线函数,结合风阻特性曲线得到风机工况。基于该方法可进行局部风机选型或预测既定型号风机工况点及风筒出口风量,同时可确定长距离掘进通风中钻孔通风有效风量与钻孔长度、直径的关系,也可确定风库中转位置与风筒长度的关系。应用分析结果表明:用一次函数代替稳定区域风机特性曲线函数不仅简单方便,结果较精确,且方法可靠、实用性高。
Abstract:
According to the situation that the research of local ventilation has been limited because it is hard to obtain or apply the characteristic curve of local fan, a method on approximate solution for characteristic curve of fan based on the range of air volume and pressure of local fan was presented. The linear interpolation function was used instead of characteristic curve function of fan, and the working conditions of fan were obtained combining with characteristic curve of wind resistance. By using this method, the type selection of local fan or the forecast of working condition point and the air volume in air duct outlet for given type fan can be conducted. At the same time, the relationship between effective air volume of borehole ventilation and the borehole length and diameter in long distance driving ventilation can be determined, as well as the relationship between transit location of wind library and length of air duct. The application analysis results showed that using the linear function instead of the characteristic curve function of fan in stable region is simple and convenient, the results are accurate, and the method is reliable and practical.

参考文献/References:

[1]李雨成. 矿井粉尘防治理论及技术[M]. 北京: 煤炭工业出版社, 2015.
[2]陈建功,赵晓波. 用正交函数拟合风机特性曲线[J]. 辽宁工学院学报,1995,15(3):63-66. CHEN Jiangong, ZHAO Xiaobo. The characteristic curves of blast fan fitted with orthogonal function [J]. Journal of Liaoning Institute of Technology, 1995, 15(3):63-66.
[3]尹昌胜, 刘剑, 邓立军. 正反相切抛物线方法拟合通风机特性曲线[J]. 辽宁工程技术大学学报(自然科学版), 2015, 34(1):77-81. YIN Changsheng, LIU Jian, DENG Lijun. Characteristic curves of fan fitted with two positive and negative tangent parabolic curve method[J]. Journal of Liaoning Technical University (Natural Science), 2015, 34(1):77-81.
[4]司俊鸿, 陈开岩, 蒋中承等. 矿用通风机性能曲线的插值方法研究[J]. 煤炭技术,2011,30(3):14-16. SI Junhong, CHEN Kaiyan, JIANG Zhongcheng, et al. Interpolation method for performance curve of mine fan [J]. Coal Technology, 2011, 30(3):14-16.
[5]徐晓,韩丛英,张永建,等. 基于最佳一致逼近理论求解矿用通风机性能曲线[J]. 煤炭学报,2011,36(S1):186-190. XU Xiao, HAN Congying, ZHANG Yongjian, et al. Solution of mine fan’s performance curves based on optimum unified approximation theory [J]. Journal of China Coal Society, 2011, 36(S1):186-190.
[6]沈汉年. 用样条函数拟合扇风机的特性曲线[J]. 云南冶金,1988,1(1):18-22. SHEN Hannian. The characteristic curves of blast fan fitted with spline function [J]. Yunnan Metallurgy, 1988, 1(1):18-22.
[7]沈龙, 张序, 魏连江,等. 通风机特性曲线最佳拟合次数的实验研究[J]. 矿山机械,2008,36(23):28-31. SHEN Long, ZHANG Xu, WEI Lianjiang, et al. Experimental study on the optimal power of data fitting to characteristic curves of the fan [J]. Mining & Processing Equipment, 2008, 36(23):28-31.
[8]贾进章, 周西华, 刘剑. 风机特性曲线数据拟合最佳次数的确定[J]. 辽宁工程技术大学学报,2000,19(5):478-480. JIA Jinzhang, ZHOU Xihua, LIU Jian. The determination of the optimal power of data fitting to characteristic curves of the fan [J]. Journal of Liaoning Technical University (Natural Science), 2000, 19(5):478-480.
[9]赵梓成. 扇风机特性曲线的数学处理[J]. 云南冶金,1986,2(1):13-19. ZHAO Zicheng. The mathematical process of the fan’s characteristic curves [J]. Yunnan Metallurgy, 1986, 2(1):13-19.
[10]吴奉亮. 矿井主要通风机性能曲线的最优多项式拟合[J]. 西安科技大学学报,2011,31(1):14-18. WU Fengliang. Optimal polynomial fitting for mine main fan characteristic curves [J]. Journal of Xi’an University of Science and Technology, 2011, 31(1):14-18.
[11]张幸乐,华中豪. 风机特性曲线模拟[J]. 煤矿设计,2000,4(1):13-16. ZHANG Xingle, HUA Zhonghao. Fitting the characteristic curves of the fan [J]. Design of Coal Mine, 2000, 4(1):13-16.
[12]唐辉雄, 赵伏军, 张柏,等. 基于最小一乘准则求解矿井通风机性能曲线[J]. 中国安全生产科学技术, 2014,10(10):16-21. TANG Huixiong, ZHAO Fujun, ZHANG Bai, et al. Solution on performance curves of mine ventilator based on least absolute deviation criteria [J]. Journal of Safety Science and Technology, 2014, 10(10):16-21.
[13]宫良伟. 主通风机风压特性方程求解算法研究[J]. 煤炭学报,2012,37(5):868-873. GONG Liangwei. Research on algorithm of the main ventilator wind pressure characteristic equation [J]. Journal of China Coal Society, 2012, 37(5):868-873.
[14]W. Dziurzynski. Numerical simulation of ventilation process computer programs [M]. Proceedings of the first School of Mine Ventilation. EMAG, Katowice, nr. 1999:303-309.
[15]李雨成, 毕秋苹, 迟羽淳,等. 金川龙首矿西一采区长距离独头掘进通风系统改造[J]. 有色金属工程, 2015, 5(5):61-66. LI Yucheng, BI Qiuping, CHI Yuchun, et al. Long blind heading ventilation systems improvement of west 1# mining area in Jinchuan longshou mine [J]. Nonferrous Metals Engineering, 2015, 5(5):61-66.

相似文献/References:

[1]陈祖云,金波,邬长福,等.局部通风风筒直径的选择[J].中国安全生产科学技术,2012,8(11):81.
 CHEN Zu yun,JIN Bo,WU Chang fu,et al.Choice duct of diameter in local ventilation[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2012,8(6):81.

备注/Memo

备注/Memo:
国家自然科学基金项目(51204089);辽宁省教育厅科研项目(L2014131)
更新日期/Last Update: 2016-06-30