|本期目录/Table of Contents|

[1]谢学斌,张欢.非平行壁面采场充填体三维应力分布规律研究*[J].中国安全生产科学技术,2023,19(2):55-62.[doi:10.11731/j.issn.1673-193x.2023.02.008]
　XIE Xuebin,ZHANG Huan.Study on three-dimensional stress distribution law of filling body in non-parallel wall stope[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2023,19(2):55-62.[doi:10.11731/j.issn.1673-193x.2023.02.008]
点击复制

非平行壁面采场充填体三维应力分布规律研究*
分享到：

《中国安全生产科学技术》[ISSN:1673-193X/CN:11-5335/TB]

卷:
19
期数:
2023年2期
页码:
55-62
栏目:
职业安全卫生管理与技术
出版日期:
2023-02-28

文章信息/Info

Title:
Study on three-dimensional stress distribution law of filling body in non-parallel wall stope
文章编号:
1673-193X(2023)-02-0055-08
作者:
谢学斌; 张欢
（中南大学 资源与安全工程学院，湖南 长沙 410083）
Author(s):
XIE Xuebin;  ZHANG Huan
(School of Resource and Safety Engineering,Central South University,Changsha Hunan 410083,China)
关键词:
非平行壁面; 拱效应; 应力分布; 解析解
Keywords:
non-parallel wall;  arch effect;  stress distribution;  analytical solution
分类号:
X936；TD853
DOI:
10.11731/j.issn.1673-193x.2023.02.008
文献标志码:
A
摘要:
为研究上下盘非平行壁面倾斜采场充填体应力分布规律，选取倾斜采场中三维水平充填层作为微分计算单元，基于极限平衡法考虑其竖直方向的受力平衡，提出非平行壁面的倾斜采场充填体的三维应力解析解，并分析不同参数对应力分布规律的影响。研究结果表明：三维条件下非平行壁面倾斜采场充填体竖向应力分布形式同平面应变条件下类似，在计算深度较小时竖向应力为近线性分布，随着计算深度的增加竖向应力增加率逐渐减小，但应力数值相对平面应变条件下较低。上盘倾角一定时，下盘倾角越大则拱效应越不明显；采场高度一定时，高宽比越大，拱效应越显著。充填体—围岩界面内摩擦角对充填体内拱效应影响较大，界面黏聚力和充填体抗剪强度参数对充填体应力分布影响相对较小。研究结果可为充填体强度设计提供参考。
Abstract:
In order to study the stress distribution law of the filling body in the inclined stope with non-parallel wall of the hanging wall and footwall,taking the three-dimensional horizontal filling layer in the inclined stope as the differential calculation unit,and considering the force balance in the vertical direction based on the limit equilibrium method,the three-dimensional stress analytical solution of the filling body in inclined stope with non-parallel wall was proposed,and the influence of different parameters on the stress distribution law was analyzed.The results showed that the vertical stress distribution of filling body in the inclined stope with non-parallel wall under three-dimensional conditions was similar to that under plane strain condition.When the calculation depth was small,the vertical stress was nearly linear distribution.With the increase of calculation depth,the increase rate of vertical stress gradually decreased,but the stress value was lower than that under plane strain condition.When the hanging wall inclination was constant,the greater the footwall inclination,the less obvious the arch effect.When the stope height was constant,the greater the height-width ratio,the more significant the arch effect.The internal friction angle of the interface between filling body and surrounding rock had great influence on the arch effect in the filling body,while the interface cohesion and the shear strength parameters of the filling body had relatively small influence on the stress distribution of filling body.The research results can provide reference for the strength design of filling body.

参考文献/References:

［1］LI L,JEAN-SBASTIEN D,AUBERTIN M.An extension of marston’s solution for the stresses in backfilled trenches with inclined walls［J］.Geotechnical and Geological Engineering,2013,31(4):1027-1039.
［2］吴顺川,李天龙,程海勇,等.高应力环境水平矿柱尺寸演变过程力学响应及稳定性［J］.中南大学学报(自然科学版),2021,52(3):1027-1039. WU Shunchuan,LI Tianlong,CHENG Haiyong,et al.Mechacial response and stability of horizontal pillar size evolution in high stress enviorment［J］.Journal of Central South University(Science and Technology),2021,52(3):1027-1039.
［3］许传金.某矿山充填体内部应力分布规律及强度设计研究［D］.赣州：江西理工大学,2021.
［4］常宝孟,杜翠凤,魏丁一,等.基于库仑摩擦原理的充填体强度力学模型［J］.中南大学学报(自然科学版),2020,51(3):777-782. CHANG Baomeng,DU Cuifeng,WEI Dingyi,et al.Strength mechanics model of filling body based on coulomb tribology principle［J］.Journal of Central South University(Science and Technology),2021,51(3):777-782.
［5］YANG P Y,LI L,AUBERTIN M.Theoretical and numerical analyses of earth pressure coefficient along the centerline of vertical openings with granular fills［J］.Applied Sciences,2018,8(10):1721-1731.
［6］XU C J,CHEN Q Z,LUO W J,et al.Analytical solution for estimating the stress state in backfill considering patterns of stress distribution［J］.International Journal of Geomechanics,2019,19(1):189-211.
［7］TING C H,SHUKLA S K,SIVAKUGAN N.Arching in soils applied to inclined mine stopes［J］.International Journal of Geomechanics,2011,11(1):29-35.
［8］LI L,AUBERTIN M,BELEM T.Erratum:formulation of a three dimensional analytical solution to evaluate stresses in backfilled vertical narrow openings［J］.Canadian Geotechnical Journal,2005,42(6):1705-1717.
［9］刘光生,杨小聪,郭利杰.阶段空场嗣后充填体三维拱应力及强度需求模型［J］.煤炭学报,2019,44(5):1391-1403. LIU Guangsheng,YANG Xiaocong,GUO Lijie.Models of three-dimensional arching stress and strength requirement for the backfill in open stoping with subsequent backfill mining［J］.Journal of China Coal Society,2019,44(5):1391-1403.
［10］RAJEEV P,SUMANASEKERA P R,SIVAKUGAN N.Average vertical stresses in underground mine stopes filled with granular backfills［J］.Geotechnical and Geological Engineering,2016,34(6):2053-2061.
［11］YAN B X,ZHU W C,HOU C,et al.A three-dimensional analytical solution to the arching effect in inclined backfilled stopes［J］.Geomechanics and Geoengineering,2019,14(2):136-147.
［12］DEB D,JAIN S.Compaction-based analytical stress model for 3D inclined backfilled stopes［J］.International Journal of Geomechanics,2018,18(4):9-18.
［13］JAHANBAKHSHZADEH A,AUBERTIN M,LI L.Three-dimensional stress state in inclined backfilled stopes obtained from numerical simulations and new closed-form solution［J］.Canadian Geotechnical Journal,2018,55(6):810-828.
［14］TING C H,SIVAKUGAN N,SHUKLA S K.Laboratory simulation of the stresses within inclined stopes［J］.Geotechnical Testing Journal,2012,35(2):280-294.
［15］ZENG F T,LI L,AUBERTIN M,et al.Implemenation of the non-associated elastoplastic MSDPu model in FLAC3D and application for stress analysis of backfilled stopes［J］.Processes,2022,10(6):1130-1151.
［16］TING C H,SIVAKUGAN N,READ W,et al.Analytical expression for vertical stress within an inclined mine stope with non-parallel walls［J］.Geotechnical and Geological Engineering,2014,32(2):577-586.
［17］闫保旭,朱万成,侯晨,等.充填体应力分布理论分析及数值模拟对比研究［J］.东北大学学报（自然科学版），2019,40(12):1773-1778. YAN Baoxu,ZHU Wancheng,HOU Chen,et al.A comparative study on the stess distribution in mine backfill through theoretical and numerical analysis［J］.Journal of Northeastern University(Natural Science),2019,40(12):1773-1778.

相似文献/References:

[1]杨磊,邱景平,邢军,等.高窄型充填采场内的拱效应及应力分布状态研究[J].中国安全生产科学技术,2016,12(7):22.[doi:10.11731/j.issn.1673-193x.2016.07.004]
　YANG Lei,QIU Jingping,XING Jun,et al.Study on arching effect and stress distribution state in high-narrow filling stope[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2016,12(2):22.[doi:10.11731/j.issn.1673-193x.2016.07.004]

备注/Memo

备注/Memo:
收稿日期： 2022-05-21
* 基金项目： 广西重点研发计划项目(AB18294004)
作者简介： 谢学斌，博士，教授，主要研究方向为城市地下空间、矿山安全技术。
通信作者： 张欢，硕士研究生，主要研究方向为采矿与充填技术。
更新日期/Last Update: 2023-03-07