|本期目录/Table of Contents|

[1]王重阳,赵刚,肖骏松,等.改善热轧降尘效率的雾化参数分析*[J].中国安全生产科学技术,2021,17(7):149-154.[doi:10.11731/j.issn.1673-193x.2021.07.024]
　WANG Chongyang,ZHAO Gang,XIAO Junsong,et al.Analysis of atomization parameters for improving dust reduction efficiency of hot rolling[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2021,17(7):149-154.[doi:10.11731/j.issn.1673-193x.2021.07.024]
点击复制

改善热轧降尘效率的雾化参数分析*
分享到：

《中国安全生产科学技术》[ISSN:1673-193X/CN:11-5335/TB]

卷:
17
期数:
2021年7期
页码:
149-154
栏目:
职业安全卫生管理与技术
出版日期:
2021-07-31

文章信息/Info

Title:
Analysis of atomization parameters for improving dust reduction efficiency of hot rolling
文章编号:
1673-193X(2021)-07-0149-06
作者:
王重阳; 赵刚; 肖骏松; 郑睿鑫
（1.武汉科技大学 冶金装备及其控制教育部重点实验室，湖北 武汉 430081；
2.武汉科技大学 机械传动与制造工程湖北省重点实验室，湖北 武汉 430081）
Author(s):
WANG Chongyang;  ZHAO Gang;  XIAO Junsong;  ZHENG Ruixin
(1.Key Laboratory of Metallurgical Equipment and Control Technology,Wuhan University of Science & Technology,Wuhan Hubei 430081,China;
2.Hubei Key Laboratory of Mechanical Transmission and Manufacturing Engineering,Wuhan University of Science & Technology,Wuhan Hubei 430081,China)
关键词:
气液两相流; 雾化降尘; 氧化铁皮粉尘; 降尘效率; 热轧高温环境
Keywords:
gas-liquid two-phase flow;  atomization dust reduction;  iron oxide scale dust;  dust reduction efficiency;  hot rolling high-temperature environment
分类号:
X938
DOI:
10.11731/j.issn.1673-193x.2021.07.024
文献标志码:
A
摘要:
为提高热轧工作区的雾化降尘效率，研究尘雾颗粒碰撞相关理论，以热轧产生的氧化铁皮粉尘为研究对象，建立基于雾滴粒径、雾滴速度和液体流量多个雾化参数的降尘效率计算模型；分析单一雾化参数对降尘效率的影响；通过实验，测得不同气液压力组合下的雾化参数，运用响应曲面法，分析多个雾化参数耦合对降尘效率的影响。结果表明：降尘效率随着雾滴粒径的减小、液体流量增大而提高，雾滴速度对其影响不明显；多因素耦合时，通过调节气液压力组合来控制降尘效率，结合高温环境对雾滴存活时间的影响分析，当气压0.3 MPa、液压0.5 MPa时，粒径为21～27 μm的粉尘沉降效果最佳，降尘效率达到90%以上，可有效解决热轧车间粉尘污染问题。
Abstract:
In order to improve the efficiency of atomization dust reduction in the hot rolling work area,the related theories of fog and dust particles collision were studied.Taking the iron oxide scale dust produced by hot rolling as the research object,a calculation model of dust reduction efficiency based on multiple atomization parameters of droplet size,droplet velocity and liquid flow rate was established.The influence of single atomization parameter on the dust reduction efficiency was analyzed,then the atomization parameters under different gas-liquid pressure combinations were measured through experiments,and the response surface method was used to analyze the influence of multiple atomization parameters coupling on the dust reduction efficiency.The results showed that the dust reduction efficiency increased with the decrease of droplet size and the increase of liquid flow rate,and the droplet velocity had no obvious influence on it.In case of multi-factor coupling,the dust reduction efficiency could be controlled by adjusting the gas-liquid pressure combination.Combined with the analysis on the impact of high-temperature environment on the survival time of droplets,when the gas pressure was 0.3 MPa and the liquid pressure was 0.5 MPa,the dust settling effect with the particle size of 21~27 μm was the best,and dust reduction efficiency reached more than 90%.It can effectively solve the problem of dust pollution in the hot rolling workshop.

参考文献/References:

［1］高四化,易康乐.热连轧轧机喷雾除尘新技术开发及应用［J］.通用机械,2019(12):48-50. GAO Sihua,YI Kangle.Development of new spray type of dedusting technology for rolling mill and its application ［J］.General Machinery,2019(12):48-50.
［2］冯展国.宝钢2050mm热轧线除尘自动化系统改造升级［J］.冶金设备,2016(1):52-56. FENG Zhanguo.Upgrade transform of Baosteel 2050 hot rolling plant dedust automation system ［J］.Metallurgical Equipment,2016(1):52-56.
［3］李玉峰.济钢热轧厂精轧机水压除尘装置的设计与应用［J］.甘肃冶金,2014,36(2):99-100. LI Yufeng.Design and application of hydraulic dust removal device of hot rolling mill in Jinan Steel ［J］.Gansu Metallurgy,2014,36(2):99-100.
［4］WANG Y,YAO W.Overview of downhole spray dust removal technology ［J］.IOP Conference Series:Earth and Environmental Science,2020,558(4):042052.
［5］徐言东,韩爽,王占坡,等.轧钢车间降尘工艺及设备综述［C］// 第十二届中国钢铁年会.北京:冶金工业出版社，2019：181-187.
［6］王鹏飞,刘荣华,汤梦,等.煤矿井下高压喷雾雾化特性及其降尘效果实验研究［J］.煤炭学报,2015,40(9):2124-2130. WANG Pengfei,LIU Ronghua,TANG Meng,et al.Experimental study on atomization characteristics and dust suppression efficiency of high-pressure spray in underground coal mine ［J］.Journal of China Coal Society,2015,40(9):2124-2130.
［7］张安明,郭社科.高压喷雾降尘的原理及其应用［J］.煤矿安全,1998(4):2-5. ZHANG Anming,GUO Sheke.Theory and application of high-pressure spray for Dust Suppression ［J］.Coal Mine Safety,1998(4):2-5.
［8］樊建人，姚军，张新育，等.气固两相流中颗粒-颗粒随机碰撞新模型［J］.工程热物理学报,2001（5）:629-632. FAN Jianren,YAO Jun,ZHANG Xinyu,et al.Modeling particle-to-particle interactions in gas-solid flows ［J］.Journal of Engineering Thermophysics,2001（5）:629-632.
［9］TANTHAPANICHAKOON W,CHARINPARINPANIKUL T.Deterministic model of open-space dust removal system using water spray nozzle:effects of polydispersity of water droplet and dust particle［J］.Separation and Purification Technology,2011,77(3):382-388.
［10］SIMAKOV N N.Numerical simulation of the two-phase flow produced by spraying a liquid by a nozzle［J］.Technical Physics,2017,62(7):1006-1012.
［11］HAN H,WANG P F,LI Y J,et al.Effect of water supply pressure on atomization characteristics and dust-reduction efficiency of internal mixing air atomizing nozzle ［J］.Advanced Powder Technology,2020,31(1):252-268.
［12］马素平,寇子明.喷雾降尘机理的研究［J］.煤炭学报,2005(3):297-300. MA Suping,KOU Ziming.Study on mechanism of reducing dust by spray ［J］.Journal of China Coal Society,2005(3):297-300.
［13］王鹏飞,刘荣华,桂哲,等.煤矿井下气液喷雾雾化特性及降尘效率理论研究［J］.煤炭学报,2016,41(9):2256-2262. WANG Pengfei,LIU Ronghua,GUI Zhe,et al.Theoretical research on atomization characteristics and dust suppression efficiency of air-water spray in underground coal mine ［J］.Journal of China Coal Society,2016,41(9):2256-2262.
［14］董子文,齐庆杰,于文惠,等.煤矿喷雾降尘雾滴存活时间的数值模拟［J］.安全与环境学报,2017,17(2):506-511. DONG Ziwen,QI Qingjie,YU Wenhui,et al.Numerical simulation for the surviving time length of the spray dust-settling droplets in the coal mine ［J］.Journal of Safety and Environment,2017,17(2):506-511.
［15］袁江涛,金仁喜,杨立.高温气流中单个雾滴运动与蒸发的耦合特性［J］.华中科技大学学报（自然科学版）,2009,37(12):92-95. YUAN Jiangtao,JIN Renxi,YANG Li.Coupling characteristics of droplet’s:motion and evaporation in high-temperature gas stream and their influencing factors ［J］.Journal of Huazhong University of Science and Technology (Natural Science Edition),2009,37(12):92-95.
［16］李刚.高效水雾降尘技术的实验研究及工程应用［D］.湘潭:湖南科技大学,2009.

相似文献/References:

[1]牛芳,鞠欣亮,刘庆明,等.2,5二甲基呋喃空气燃烧过程研究[J].中国安全生产科学技术,2012,8(3):9.
　NIU Fang,JU Xin liang,LIU Qing ming,et al.Experimental study of 2,5dimethylfuran air mixture combustion characteristicsin a constant volume combustion bomb[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2012,8(7):9.
[2]李轶明,何敏侠,夏威,等.水平井油基钻井液气侵溶解气膨胀运移规律研究[J].中国安全生产科学技术,2016,12(10):44.[doi:10.11731/j.issn.1673-193x.2016.10.007]
　LI Yiming,HE Minxia,XIA Wei,et al.Study on swelling and migration laws of dissolved gas during gas kick of oil-based drilling fluid in horizontal well[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2016,12(7):44.[doi:10.11731/j.issn.1673-193x.2016.10.007]
[3]孙媛,曹学文,梁法春,等.水平管分层流下微孔泄漏特性数值模拟和实验分析[J].中国安全生产科学技术,2018,14(12):14.[doi:10.11731/j.issn.1673-193x.2018.12.002]
　SUN Yuan,CAO Xuewen,LIANG Fachun,et al.Numerical simulation and experimental analysis on leakage characteristics of micropore on horizontal pipe under stratified flow[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2018,14(7):14.[doi:10.11731/j.issn.1673-193x.2018.12.002]

备注/Memo

备注/Memo:
收稿日期： 2021-03-16
* 基金项目： 国家自然科学基金项目（51405352）
作者简介： 王重阳，硕士研究生，主要研究方向为绿色制造。
通信作者： 赵刚，博士，教授,主要研究方向为绿色制造。
更新日期/Last Update: 2021-08-05