|本期目录/Table of Contents|

[1]陈文康,冯定,杜宇成,等.水平井钻磨管柱油管组合方式研究及下入安全性分析[J].中国安全生产科学技术,2019,15(11):43-49.[doi:10.11731/j.issn.1673-193x.2019.11.007]
 CHEN Wenkang,FENG Ding,DU Yucheng,et al.Study on tubing joined pattern of drillgrinding string in horizontal well and safety analysis of tripping[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2019,15(11):43-49.[doi:10.11731/j.issn.1673-193x.2019.11.007]
点击复制

水平井钻磨管柱油管组合方式研究及下入安全性分析
分享到:

《中国安全生产科学技术》[ISSN:1673-193X/CN:11-5335/TB]

卷:
15
期数:
2019年11期
页码:
43-49
栏目:
学术论著
出版日期:
2019-11-30

文章信息/Info

Title:
Study on tubing joined pattern of drillgrinding string in horizontal well and safety analysis of tripping
文章编号:
1673-193X(2019)-11-0043-07
作者:
陈文康冯定杜宇成孙巧雷
(1.长江大学 机械工程学院,湖北 荆州 434023;
2.长江大学 湖北省油气钻完井工具工程技术研究中心,湖北 荆州 434023;
3.长江大学 非常规油气湖北省协同创新中心,湖北 武汉 430100)
Author(s):
CHEN Wenkang FENG Ding DU Yucheng SUN Qiaolei
(1.School of Mechanical Engineering,Yangtze University,Jingzhou Hubei 434023,China;
2.Hubei Engineering Research Center for Oil & Gas Drilling and Completion Tools,Jingzhou Hubei 434023,China;
3.Hubei Cooperative Innovation Center of Unconventional Oil and Gas,Wuhan Hubei 430100,China)
关键词:
水平井钻磨组合方式安全分析管柱
Keywords:
horizontal well drillgrinding joined pattern safety analysis string
分类号:
X937;TE358
DOI:
10.11731/j.issn.1673-193x.2019.11.007
文献标志码:
A
摘要:
基于钻磨管柱下入过程易造成遇卡事故,油田采用了2种线重油管的组合方式进行钻磨作业,提高了管柱的下入能力,但未能得到2种线重油管组合方式优选的可靠依据。为得到2种线重油管的最优组合方式,采用微元法对管柱单元在各井段的受力进行分析,建立钻磨管柱的下入载荷计算模型;采用编程对油田水平井进行实例计算,计算结果与实测结果对比显示模型平均误差在8.12%左右,验证了模型的正确性;基于下入载荷计算模型,进行了钻磨管柱组合特性研究及参数敏感性分析。结果表明:采用2种线重油管的组合方式能增大钻磨管柱下入能力,当大线重油管所占整个钻磨管柱的长度为井斜角70.8°左右的井深时,组合比例最优,不同的摩擦系数μ决定不同最优组合比例。
Abstract:
Aiming at the problem that the tripping process of the drillgrinding string is easy to cause the stuck accident,the joined pattern of two kinds of line weight tubing is used to carry out the drillgrinding operation in the oilfield,which improves the tripping ability of string,but the reliable basis for optimally selecting the joined pattern of two kinds of line weight tubing has not been found.In order to obtain the optimal joined pattern of the two kinds of line weight tubing,the differential element method was used to analyze the force of string element in each well section,and a calculation model of tripping load for the drillgrinding string was established.The case calculation on the horizontal well in the oilfield was carried out by using the programming.The comparison between the calculated results and the measured results showed that the average error of the model was about 8.12%,which verified the correctness of the model.Based on the calculation model of tripping load,the joined characteristics study and the parameters sensitivity analysis of the drillgrinding string were conducted.The results showed that the joined pattern of two kinds of line weight tubing could increase the tripping ability of drillgrinding string.When the length of the large line weight tubing in the whole drillgrinding string was the well depth with the well deviated angle of about 70.8°,the joined proportion was the optimum,and different friction coefficient μ decided different optimal joined proportion.

参考文献/References:

[1]刘格宏.水平井多级压裂管柱力学分析及软件开发[D].成都:西南石油大学,2017.
[2]MIRHAJ A,KAARSTAD E,ADNOY B S.Minimizing friction in shallow horizontal wells[J].Society of Petroleum Technology,2016,68(11):65-66.
[3]张杨.水平井套管摩阻计算与可下入性分析[D].成都:西南石油大学,2015.
[4]MCSPADDEN A R,TREVISAN R.Friction load redistribution for robust and cost efficient design of extended reach and horizontal well completions[J].Society of Petroleum Engineers,2016:SPE-178905-MS.
[5]王毓震,杨文斌,姚顺利,等.浅层水平井管柱摩阻与力学分析[J].钻采工艺,2012,35(4):80-82. WANG Yuzhen,YANG Wenbin,YAO Shunli,et al.Friction and mechanical analysis of shallow horizontal well pipe string[J].Drill-grinding & Production Technology,2012,35(4):80-82.
[6]牟易升,练章华,张强,等.扶正器对超深气井油管柱屈曲行为的影响研究[J].中国安全生产科学技术,2018,14(3):109-114. MOU Yisheng,LIAN Zhanghua,ZHANG Qiang,et al.Study on influence of centralizer on buckling behavior of tubing string in ultra-deep gas well[J].Journal of Safety Science and Technology,2018,14(3):109-114.
[7]代理震.裸眼水平井压裂管柱下入安全性分析[J].石油机械,2016,44(11):101-106. DAI Lizhen.Safety analysis of fracturing string tripping in horizontal open hole well[J].China Petroleum Machinery,2016,44(11):101-106.
[8]祝效华,贾彦杰,童华.气体钻井钻柱的静动力学特性研究[J].应用力学学报,2010,27(4):799-803,857. ZHU Xiaohua,JIA Yanjie,TONG Hua.Static & dynamic characteristics of drill string during gas drill-grinding[J].Chinese Journal of Applied Mechanics,2010,27(4):799-803,857.
[9]冯定,施雷,夏成宇,等.定向井的多层分注管柱串通过性分析[J].西南石油大学学报(自然科学版),2016,38(3):162-169. FENG Ding,SHI Lei,XIA Chengyu,et al.The passthrough capacity analysis for multilayer injection strings in directional wells[J].Journal of Southwest Petroleum University(Science & Technology Edition),2016,38(3):162-169.
[10]张应安.水平井多封隔器压裂管柱通过性力学关键问题研究[D].大庆:东北石油大学,2011.
[11]董小彬.水平井冲砂参数研究与应用[D].大庆:东北石油大学,2011.
[12]孙巧雷,冯定,杨行,等.轴向载荷波动下海上测试管柱动力响应与安全系数分析[J].中国安全生产科学技术,2018,14(11):19-25. SUN Qiaolei,FENG Ding,YANG Hang,et al.Analysison dynamic response and safety coefficient of offshore testing string under axial load fluctuation[J].Journal of Safety Science and Technology,2018,14(11):19-25.
[13]练章华,林铁军,刘健,等.水平井完井管柱力学—数学模型建立[J].天然气工业,2006,26(7):61-64,153-154. LIAN Zhanghua,LIN Tiejun,LIU Jian,et al.Mechanical mathematic models developed for completion strings of horizontal wells[J].Natural Gas Industry,2006,26(7):61-64,153-154.
[14]夏成宇,孙巧雷,冯定,等.液压环境下流体对管柱单元XYZ方向作用力分析[J].应用力学学报,2016,33(2):215-222,368. XIA Chengyu,SUN Qiaolei,FENG Ding,et al.Force analysis in pipe string unit with hydraulic conditions in XYZ direction[J].Chinese Journal of Applied Mechanics,2016,33(2):215-222,368.
[15]申晓莉.定向井注水管柱单元结构浮力计算公式修正[J].石油机械,2014,42(5):77-79,83. SHEN Xiaoli.Modification of the calculation formula for the buoyancy on unit structure of injection string in directional well[J].China Petroleum Machinery,2014,42(5):77-79,83.
[16]龚银春,艾志久,付必伟,等.井斜角与摩擦对连续油管正弦屈曲的影响研究[J].中国安全生产科学技术,2016,12(10):50-55. GONG Yinchun,AI Zhijiu,FU Biwei,et al.Study on influence of inclination angle and friction on sinusoidal buckling of coiled tubing[J].Journal of Safety Science and Technology,2016,12(10):50-55.

相似文献/References:

[1]李轶明,何敏侠,夏威,等.水平井油基钻井液气侵溶解气膨胀运移规律研究[J].中国安全生产科学技术,2016,12(10):44.[doi:10.11731/j.issn.1673-193x.2016.10.007]
 LI Yiming,HE Minxia,XIA Wei,et al.Study on swelling and migration laws of dissolved gas during gas kick of oil-based drilling fluid in horizontal well[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2016,12(11):44.[doi:10.11731/j.issn.1673-193x.2016.10.007]
[2]刘少胡,李思行,冯定,等.连续管钻塞水平段铁屑运移机理研究[J].中国安全生产科学技术,2017,13(6):58.[doi:10.11731/j.issn.1673-193x.2017.06.009]
 LIU Shaohu,LI Sixing,FENG Ding,et al.Study on migration mechanism of iron filings in horizontal section during drilling plug with coiled tubing[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2017,13(11):58.[doi:10.11731/j.issn.1673-193x.2017.06.009]

备注/Memo

备注/Memo:
收稿日期: 2019-08-21
* 基金项目: 国家自然科学基金项目(51704034);国家重大专项课题(2016ZX05038-002-LH001)
作者简介: 陈文康,硕士研究生,主要研究方向为油气井管柱力学。
通信作者: 冯定,博士,教授,主要研究方向为石油机械及井下工具的设计和管柱力学。
更新日期/Last Update: 2019-12-25