|本期目录/Table of Contents|

[1]张寅,凡聪聪.特厚煤层综放工作面多参量监测预警分析[J].中国安全生产科学技术,2019,15(10):81-87.[doi:10.11731/j.issn.1673-193x.2019.10.013]
 ZHANG Yin,FAN Congcong.Analysis on multiparameter monitoring and earlywarning of fully mechanized caving face for extrathick coal seam[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2019,15(10):81-87.[doi:10.11731/j.issn.1673-193x.2019.10.013]
点击复制

特厚煤层综放工作面多参量监测预警分析
分享到:

《中国安全生产科学技术》[ISSN:1673-193X/CN:11-5335/TB]

卷:
15
期数:
2019年10期
页码:
81-87
栏目:
职业安全卫生管理与技术
出版日期:
2019-10-31

文章信息/Info

Title:
Analysis on multiparameter monitoring and earlywarning of fully mechanized caving face for extrathick coal seam
文章编号:
1673-193X(2019)-10-0081-07
作者:
张寅凡聪聪
(辽宁工程技术大学 力学与工程学院,辽宁 阜新 123000)
Author(s):
ZHANG Yin FAN Congcong
(School of Mechanics and Engineering,Liaoning Technical University,Fuxin Liaoning 123000,China)
关键词:
综放工作面微震活动钻屑量支架阻力地表变形
Keywords:
fully mechanized caving face microseismic activity drilling cuttings weight support resistance surface deformation
分类号:
X924.4
DOI:
10.11731/j.issn.1673-193x.2019.10.013
文献标志码:
A
摘要:
根据某矿12220工作面特厚煤层综放开采,穿越F16逆冲断层的特殊情况,为保证安全生产及时提供预警信息,采用微震、钻屑量、支架阻力、地表变形多种监测手段综合分析回采过程中的参量变化规律。结果表明:微震活动的峰值能量周期约为3 d,回采间距约为4.5 m,且断层下盘较上盘的微震事件能量更集中;钻屑量的统计分析发现最大值出现在上巷下帮7~11 m和下巷上帮9~11 m范围内,划定该区域为巷帮高应力集中区,并将平均钻屑量3 kg/m作为黄色预警临界值,3.5 kg/m作为红色预警临界值;另外,根据支架前、后柱阻力变化情况,划定了2个连续变化的高压力区,发现在初撑力偏低,甚至不接顶、虚顶情况下,支架梁顶部煤体受自重和构造应力作用易发生准脆性受拉断裂破坏,且在穿越逆冲断层的回采过程中,支架阻力峰值呈现由中下部向上部转移的变化规律;最后,通过对地表走向、倾向测点的变形量数据进行统计分析发现,走向面后84.9~284.8 m范围内下沉量较大,下沉速率增幅明显;而工作面倾向中部下沉量最大,整体下沉变形呈二次抛物型,其中下部下沉速率增幅明显。
Abstract:
According to the special situation of fully mechanized caving mining in 12220 working face of a mine with crossing F16 thrust fault,in order to provide the earlywarning information for the work safety in time,the variation laws of parameters in the mining process were comprehensively analyzed by multiple monitoring means such as microseism,drilling cuttings weight,support resistance and surface deformation.The results showed that the peak energy period of microseismic activity was about 3 days,the mining spacing was about 4.5 m,and the energy of microseismic events at the lower wall of fault was more concentrated than that at the upper wall.The statistical analysis of drilling cuttings weight showed that the maximum value appeared in the range of 7-11 m on dip side of upper roadway and 9-11 m on rise side of lower roadway,and this area was designated as the high stress concentration area of the roadway side.The average drilling cuttings weight of 3 kg/m was taken as the critical value of yellow earlywarning,as well as 3.5 kg/m as the critical value of red earlywarning.In addition,according to the change of resistance on the front of the support,two continuously changing highpressure zones were delineated.It was found that the coal body at the top of the support beam was liable to be damaged by quasibrittle tension fracture under the action of selfweight and tectonic stress when the initial support force was low or even not connected with the roof or the virtual roof,and during the mining process passing through the thrust fault,the peak support resistance presented the change laws of transferring from the middle and lower parts to the upper parts.Finally,through the statistical analysis on the deformation data of the surface strike and inclination survey points,it was found that the subsidence amount was larger in the range of 84.9-284.8 m behind the strike plane,and the subsidence rate increased obviously,while the subsidence amount at the inclination middle part of the working face was the largest,and the overall subsidence deformation was a quadratic parabolic type,in which the subsidence rate at the lower part increased obviously.

参考文献/References:

[1]宋振骐,陈立良,王春秋,等.综采放顶煤安全开采条件的认识[J].煤炭学报,1995,20(4):356-360. SONG Zhenqi,CHEN Liliang,WANG Chunqiu,et al.Understanding of safe mining conditions of fully mechanized caving coal [J].Journal of Coal Mine,1995,20 (4):356-360.
[2]李明忠.榆神矿区坚硬特厚煤层大采高综放开采关键技术研究[D].北京:煤炭科学研究总院,2018.
[3]齐庆杰,祁云,张建国,等.综放工作面瓦斯抽采最优钻孔参数研究[J].中国安全生产科学技术,2018,14(6):76-83. QI Qingjie,QI Yun,ZHANG Jianguo,et al.Study on optimum borehole parameters for gas extraction in fully mechanized top coal caving face [J].China Safety Production Science and Technology,2018,14(6):76-83.
[4]戈素亮,张江波.综放工作面沿空巷道围岩破断机理及支护技术研究[J].煤炭工程,2019,51(7):44-48. GE Suliang,ZHANG Jiangbo.Study on surrounding rock breakage mechanism and supporting technology of gob-side entry in fully mechanized top-coal caving face [J].Coal Engineering,2019,51(7):44-48.
[5]刘世奇.厚煤层开采覆岩破坏规律及粘土隔水层采动失稳机理研究[D].北京:中国矿业大学(北京),2016.
[6]天地科技股份有限公司开采设计事业部(煤炭科学研究总院开采设计研究分院)采矿设计研究所.综采放顶煤技术理论与实践的创新发展[M],北京:煤炭工业出版社,2012.
[7]何团,毛德兵,黄志增,等.特厚煤层区段防水煤柱稳定性评价及保护技术研究[J].岩土力学,2017,38(4):1148-1153. HE Tuan,MAO Debing,HUANG Zhizeng,et al.Study on stability evaluation and protection technology of waterproof coal pillar in extra-thick coal seam section [J].Geotechnical Mechanics,2017,38(4):1148-1153.
[8]卫敏敏.综放工作面巷道支护技术研究[J].能源与节能,2019(4):118-119,188. WEI Minmin.Study on roadway support technology in fully mechanized caving face[J].Energy and Energy Conservation,2019(4):118-119,188.
[9]于斌,刘长友,刘锦荣.大同矿区特厚煤层综放回采巷道强矿压显现机制及控制技术[J].岩石力学与工程学报,2014,33(9):1863-1872. YU Bin,LIU Changyou,LIU Jinrong.Datong mining area ultra-thick coal seam fully mechanized caving mining roadway pressure appearance mechanism and control technology [J].Journal of Rock Mechanics and Engineering,2014,33 (9):1863-1872.
[10]史红邈.复杂地质条件下松软厚煤层综放工作面矿压显现规律实测与分析[J].煤,2014,23(9):113-114,116. SHI Hongmiao.Field measurement and analysis of strata pressure appearance law of fully mechanized caving face in soft and thick coal seam under complex geological conditions[J].Coal,2014,23(9):113-114,116.
[11]翟新献,赵晓凡,涂兴子,等.放顶煤开采上覆巨厚砾岩层变形移动规律研究[J].河南理工大学学报(自然科学版),2019,38(3):16-23. ZHAI Xinxian,ZHAO Xiaofan,TU Xingzi,et al.Study on deformation and movement law of overlying thick conglomerate stratum in top coal caving mining [J].Journal of Henan University of Technology (Natural Science Edition),2019,38 (3):16-23.
[12]刘杰.特厚煤层综放工作面围岩运动的微地震监测[J].矿业安全与环保,2008,35(1):44-46. LIU Jie.Microseismic monitoring of surrounding rock movement in fully mechanized caving face in extra thick coal seam[J].Mining Safety and Environmental Protection,2008,35(1):44-46.
[13]于雷,闫少宏.特厚煤层综放开采顶板运动形式及矿压规律研究[J].煤炭科学技术,2015,43(8):40-44,59. YU Lei,YAN Shaohong.Study on roof movement form and ground pressure law of fully mechanized caving mining in extra thick coal seam [J].Coal Science and Technology,2015,43(8):40-44,59.
[14]孔令海,姜福兴,杨淑华,等.基于高精度微震监测的特厚煤层综放工作面顶板运动规律[J].北京科技大学学报,2010,32(5):552-558,588. KONG Linghai,JIANG Fuxing,YANG Shuhua,et al.Roof movement law of fully mechanized caving face in extra-thick coal seam based on high precision microseismic monitoring [J].Journal of Beijing University of Science and Technology,2010,32(5):552-558,588.
[15]李春意,高永格,崔希民,等.云驾岭矿厚煤层综采地表沉陷时空演化规律研究[J].采矿与安全工程学报,2019,36(1):37-43,50. LI Chunyi,GAO Yongge,CUI Ximin,et al.Study on spatial and temporal evolution of surface subsidence in fully mechanized mining of thick coal seam in Yunjialing coal mine [J].Journal of Mining and Safety Engineering,2019,36(1):37-43,50.

相似文献/References:

[1]郭文彬.灵泉煤矿粉尘浓度分布规律的实测研究[J].中国安全生产科学技术,2011,7(3):65.
 GUO Wen-bin.On-site measurement study on distrition pattern of dust concentration in Lingquan mine[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2011,7(10):65.
[2]马建宏,陈懿博,庞泽明.综放工作面瓦斯涌出量预测方法及工程实践[J].中国安全生产科学技术,2014,10(10):143.[doi:10.11731/j.issn.1673-193x.2014.10.024]
 MA Jian-hong,CHEN Yi-bo,PANG Ze-ming.Prediction method and engineering practice of gas emission in fully mechanized top coal caving face[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2014,10(10):143.[doi:10.11731/j.issn.1673-193x.2014.10.024]
[3]杨宏民,于世芹,梁龙辉,等.低瓦斯煤层高强度开采矿井瓦斯涌出特征及分源治理[J].中国安全生产科学技术,2018,14(5):109.[doi:10.11731/j.issn.1673-193x.2018.05.016]
 YANG Hongmin,YU Shiqin,LIANG Longhui,et al.Characteristics of gas emission and different-source control for high intensity mining mine in low gassy coal seam[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2018,14(10):109.[doi:10.11731/j.issn.1673-193x.2018.05.016]
[4]齐庆杰,祁云,张建国,等.综放工作面瓦斯抽采最优钻孔参数研究[J].中国安全生产科学技术,2018,14(6):76.[doi:10.11731/j.issn.1673-193x.2018.06.012]
 QI Qingjie,QI Yun,ZHANG Jianguo,et al.Study on optimum drilling parameters for gas extraction in fully mechanized caving face[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2018,14(10):76.[doi:10.11731/j.issn.1673-193x.2018.06.012]

备注/Memo

备注/Memo:
收稿日期: 2019-07-08
* 基金项目: 国家重点研发计划课题项目(2018YFC0604701)
作者简介: 张寅,博士,教授,主要研究方向为矿山动力灾害防治。
通信作者: 凡聪聪,硕士研究生,主要研究方向为矿山动力灾害防治。
更新日期/Last Update: 2019-11-05