|本期目录/Table of Contents|

[1]李轶明,夏威,罗方伟,等.体积法压井现场试验研究[J].中国安全生产科学技术,2019,15(2):10-16.[doi:10.11731/j.issn.1673-193x.2019.02.002]
　LI Yiming,XIA Wei,LUO Fangwei,et al.Field experimental research on volumetric method for well killing[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2019,15(2):10-16.[doi:10.11731/j.issn.1673-193x.2019.02.002]
点击复制

体积法压井现场试验研究
分享到：

《中国安全生产科学技术》[ISSN:1673-193X/CN:11-5335/TB]

卷:
15
期数:
2019年2期
页码:
10-16
栏目:
学术论著
出版日期:
2019-02-28

文章信息/Info

Title:
Field experimental research on volumetric method for well killing
文章编号:
1673-193X(2019)-02-0010-07
作者:
李轶明1; 夏威1; 罗方伟2 ; 陈泽恩1; 梁爽2; 王鹏1
（1. 中国石油大学（北京） 石油工程学院，北京 102249；
2. 中石油安全环保技术研究院，北京 102206）
Author(s):
LI Yiming1;  XIA Wei1;  LUO Fangwei2;  CHEN Zeen1;  LIANG Shuang2;  WANG Peng1
(1. College of Petroleum Engineering, China University of Petroleum (Beijing), Beijing 102249, China;
2. CNPC Research Institute of Safety and Environment Technology, Beijing 102206, China)
关键词:
体积法; 压井方法; 置换过程; 气侵
Keywords:
volumetric method;  well killing method;  replacement process;  gas cut
分类号:
X937；TE249
DOI:
10.11731/j.issn.1673-193x.2019.02.002
文献标志码:
A
摘要:
为了更加精细地描述体积法压井过程中井内气体的分布和运移规律，针对体积控制法压井开展了试验研究，通过在试验井井底注气的方式，模拟气侵并实施体积法压井；测量并分析压井过程中套压、立压、出口流量及注气速率等参数的变化规律。研究结果表明：体积法压井控制过程中，由于井筒内气侵气体以多个短气柱和弥散型气泡分布为主，在钻井液泄流过程中套压很难实现理想状态的稳定控制；井口出现气体并不代表气侵气体以气柱形式全部到达井口，通过气液混合泄流，可有效控制井底压力实现井底准恒压；当部分气体在井口形成气柱后，可提前启动置换流程，这种体积控制流程和置换流程结合的方式可有效降低地层破裂风险；置换流程中压井液的注入会产生井底附加压力，针对薄弱地层，需考虑此参数以降低风险。
Abstract:
In order to describe the distribution and migration laws of gas in the well during the volumetric well killing process more finely, the experimental research on the volumetric control method for well killing was carried out. The gas cut was simulated and the volumetric method for well killing was implemented through the way of gas injection at the bottom of experimental well, then the variation of casing pressure, standpipe pressure, outlet flow rate, gas injection rate and other parameters during the well killing process were measured and analyzed. The results showed that during the volumetric control process of well killing, the cutting gas in the wellbore mainly distributed in the forms of multiple short gas columns and dispersive bubbles, so it was very difficult to achieve the stable control of ideal status for the casing pressure during the discharge process of drilling fluid. The appearance of gas at the wellhead did not represent that the cutting gas would all arrive the wellhead with the form of gas column, and the quasi constant pressure at well bottom could be achieved by controlling the pressure of well bottom through the gasliquid mixed discharge. After partial gas formed the gas column at the wellhead, the replacement procedure could be started in advance, and the combined method of volumetric control procedure and replacement procedure could reduce the risk of formation damage. The injection of well killing fluid in the replacement procedure would generate the additional pressure of well bottom, and this parameter should be considered to reduce the risk aiming at the weak formation.

参考文献/References:

［1］WATSON D，BRITTENHAM T，MOORE P L. Advanced well control［M］. 10th ed. Texas：Society of Petroleum Engineers，2003.
［2］GRACE R D. Blowout and well control handbook［M］. Oxford：Gulf Professional Publishing，2003.
［3］MATTHEWS J L，BOURGOYNE A T. Techniques for handling upward migration of gas kicks in a shut-in well［C］// Society of Petroleum Engineers.IADC/SPE Drilling Conference，February 20-23，1983，New Orleans，Louisiana.
［4］GRACE R D，BURTON M R. Mud lubrication —A viable alternative in well control［C］// Society of Petroleum Engineers. SPE/IADC Drilling Conference，March 12-15，1996，New Orleans，Louisiana, 1996.
［5］GRACE R D，SHURSEN J L. Field examples of gas migration rates［C］// Society of Petroleum Engineers. SPE/IADC Drilling Conference，March 12-15，1996，New Orleans，Louisiana，1996.
［6］RADER D W，BOURGOYNE A T，WARD R H. Factors affecting bubble-rise velocity of gas kicks［J］. Journal of Petroleum Technology，1975，27（5）：571-584.
［7］任美鹏，刘书杰，耿亚楠，等.置换法压井关井期间压井液下落速度计算方法［J］.中国安全生产科学技术，2018，14（6）：128-133. REN Meipeng，LIU Shujie，GENG Yanan，et al. Calculation method of falling velocity for killing fluid during shut-in process with displacement method for killing［J］. Journal of Safety Science and Technology，2018，14（6）：128-133.
［8］JOHNSON A，REZMER-COOPER I，BAILEY Tim，et al. Gas migration: Fast, slow or stopped［C］// Society of Petroleum Engineers. SPE/IADC Drilling Conference，February 26- March 2，1995.
［9］AL-DARMAKI S，FALCONE G，HALE C P，et al. Experimental investigation and modeling of the effects of rising gas bubbles in a closed pipe［J］. SPE Journal，2008，13（3）：354-365.
［10］LAGE A C V M，NAKAGAWA E Y，CORDOVIL A G D P. Experimental tests for gas kick migration analysis［C］// Society of Petroleum Engineers. SPE Latin America/Caribbean Petroleum Engineering Conference，1994，Buenos Aires，Argentina，1994.
［11］王安康，雷新超.置换法压井方法的现场应用［J］.海洋石油，2018，38（1）：60-63. WANG Ankang，LEI Xinchao. Field application of displacement well killing method［J］. Offshore Oil，2018，38（1）：60-63.
［12］吕选鹏，吴朝明，高立彬，等.置换法压井工艺技术现场应用［J］.油气井测试，2017，26（1）：49-50，54，77. LYU Xuanpeng，WU Chaoming，GAO Libin，et al. Field application of replacement killing well technology［J］. Well Testing，2017，26（1）：49-50，54，77.
［13］李强，李莲明，侯亚龙，等.置换法压井技术在榆林气井的应用［J］.石油化工应用，2010，29（5）：38-40. LI Qiang，LI Lianming，HOU Yalong，et al. The application of replacement killing well technology in Yulin gas field［J］. Petrochemical Industry Application，2010，29（5）：38-40.
［14］胡建国.置换法压井技术在柯19-2井中的应用［J］.吐哈油气，2012，17（3）：282-284. HU Jianguo. Application of displacement well killing technique in well ke19-2［J］. Tuha Oil & Gas，2012，17（3）：282-284.
［15］李运辉，黄船，崔进，等.置换法压井技术在川东北河坝1井的成功应用［J］.油气井测试，2008，17（4）：45-46,77. LI Yunhui，HUANG Chuan，CUI Jin，et al. Successful application of killing well tech using replacement method in heba1 well in north east of Sichuan［J］. Well Testing，2008，17（4）：45-46,77.

相似文献/References:

备注/Memo

备注/Memo:
收稿日期： 2018-11-13；数字出版日期：2019-02-19
基金项目： 中国石油天然气集团公司科技研究与技术开发项目（2016D-4601）
作者简介： 李轶明，博士，讲师，主要研究方向为井控、井筒多相流和实验流体力学等。
更新日期/Last Update: 2019-03-06