[1]鲜宁,姜放,荣明,等.连续油管在酸性环境下的腐蚀与防护及其研究进展[J].天然气工业,2011,31(4):113-116.
XIAN Ning, JIANG Fang, RONG Ming, et al. Corrosion and protection of coiled tubing in acid environment and its research progress[J]. Natural Gas Industry, 2011,31(4):113-116.
[2]毕宗岳,张晓峰,张万鹏,等.连续油管疲劳试验机设计与疲劳寿命试验[J].理化检验(物理分册),2012,48(2):79-82.
BI Zongyue, ZHANG Xiaofeng, ZHANG Wanpeng, et al. Continuous design and fatigue life of tubing fatigue testing machine[J]. Physical Testing (physical volume), 2012,48(2): 79-82.
[3]TIPTON S M, NEWBURN D A. Plasticity and fatigue damage modeling of severely loaded tubing[J].Advances in Fatigue Lifetime Predictive Techniques, 1990, 66(1): 369-382.
[4]王优强,张嗣伟.连续油管疲劳寿命预测模型的建立[J].青岛建筑工程学院学报,2001,22(1):1-5.
WANG Youqiang, ZHANG Siwei. The prediction model of the coiled tubing fatigue life[J]. Journal of Qingdao Architecture and Engineering Institute, 2001,22(1): 1-5.
[5]王海涛,李相方.连续油管卷曲低周疲劳寿命预测[J].石油机械,2008,36(11):25-27,31.
WANG Haitao, LI Xiangfang. Low cycle fatigue life prediction of coiled tubing[J].Petroleum Machinery, 2008, 36(11): 25-27,31.
[6]温庆伦,李霄,张城举.含腐蚀坑连续油管弯曲作用时的剩余强度评价[J].热加工工艺,2016,45(12):71-73.
WEN Qinglun, LI Xiao, ZHANG Chengju. The residual strength assessment with corrosion pits of bending coiled tubing[J]. Thermal Processing Technology, 2016,45(12): 71-73.
[7]梅旭涛,张仕民,王文明,等.连续油管超声检测系统壁厚与椭圆度测量方案[J].石油矿场机械,2015,44(4):19-24.
MEI Xutao, ZHANG Shimin, WANG Wenming, et al. Ultrasonic testing system of coiled tubing wall thickness and scheme measurement of ellipticity[J].Oil Field Equipment, 2015,44(4): 19-24.
[8]程强强,夏桂锁,于润桥,等.基于微磁的连续油管在线检测技术[J].天然气工业,2014,34(7):109-114.
CHENG Qiangqiang, XIA Guisuo, YU Runqiao, et al. Coiled tubing online detection technology based on micro magnetic[J]. Natural Gas Industry, 2014,34(7): 109-114.
[9]王立敏,宋志龙,常家玉.连续油管电磁无损检测试验分析及应用[J].石油矿场机械,2015,44(7):60-63.
WANG Limin, SONG Zhilong, CHANG Jiayu. Electromagnetic nondestructive testing analysis and application ofcoiled tubing[J]. Oil Field Equipment, 2015,44(7): 60-63.
[10]任吉林,林俊明,任文坚,等.金属磁记忆检测技术研究现状与发展前景[J].无损检测,2012,34(4):3-11.
REN Jilin, LIN Junming, REN Wenjian, et al. The metal magnetic memory testing technology research status and development prospect of[J]. Non-destructive Testing, 2012, 34(4): 3-11.
[11]DUBOV A A. Diagnostics of metal items and equipment by means of metal magnetic memory [C]//Proceedings of CHSNDT 7th Conference on NDT and International Research Symposium, Shantou China. Beijing: China Machine Press,1999:181-187.
[12]王虹富,樊建春.套管损伤磁记忆检测信号定量研究[J].中国安全生产科学技术,2016,12(12):116-120.
WANG Hongfu, FAN Jianchun. Research of casing damage magnetic memory signal[J]. China Academy of Safety Science and Technology, 2016, 12(12): 116-120.
[13]VAZQUEZ M, GOMEZ P C, CHEN D X. Switching mechanism and domain structure of bistable amorphous wires[J]. IEEE Transactions on Magnetics, 1992, 28(5): 3147-3149.
[14]熊二刚.基于磁力效应的钢结构全磁通应力检测技术的理论和试验研究[D].西安:西安建筑科技大学,2007.
[15]李晓秋,樊建春,赵坤鹏,等.连续油管疲劳损伤的磁记忆检测试验研究[J].中国安全生产科学技术,2013,9(6):54-57.
LI Xiaoqiu, FAN Jianchun, ZHAO Kunpeng, et al. Experimental study on magnetic memory testing for fatigue damage of coiled tubing[J]. China Academy of Safety Science and Technology, 2013, 9(6): 54-57.
[16]闫相桥,类维生,姚枚.典型缺口试样应力集中系数的数值分析[J].哈尔滨工业大学学报,1993,25(4):99-105.
YAN Xiangqiao, LEI Weisheng, YAO Mei. Typical numerical notch stress concentration factor analysis[J]. Journal of Harbin Institute of Technology, 1993, 25(4): 99-105.
[17]黄伟杰,陈丽,赵伟,等.缺陷锐度和方位对接头应力集中系数的影响[J].热加工工艺,2015,44(7):226-228,231.
HUANG Weijie, CHEN Li, ZHAO Wei, et al. Influence of defect sharpness and orientation on stress concentration factor of joint[J]. Hot Working Technology, 2015, 44(7): 226-228,231.
[1]李晓秋,樊建春,范磊,等.大位移塑性变形下连续油管直径增长规律研究[J].中国安全生产科学技术,2013,9(5):25.[doi:10.11731/j.issn.1673-193x.2013.05.005]
LI Xiao qiu,FAN Jian chun,FAN Lei,et al.Study on diameter growth law of coiled tubing under severe plastic deformation[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2013,9(9):25.[doi:10.11731/j.issn.1673-193x.2013.05.005]
[2]李晓秋,樊建春,赵坤鹏,等.连续油管疲劳损伤的磁记忆检测试验研究[J].中国安全生产科学技术,2013,9(6):54.[doi:10.11731/j.issn.1673-193x.2013.06.010]
LI Xiao qiu,FAN Jian chun,ZHAO Kun peng,et al.Experimental study on fatigue damage of coiled tubing based on metal magnetic memory testing[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2013,9(9):54.[doi:10.11731/j.issn.1673-193x.2013.06.010]
[3]范磊,樊建春,李晓秋.循环弯曲和内压作用下连续油管壁厚变化规律试验研究[J].中国安全生产科学技术,2013,9(12):69.[doi:10.11731/j.issn.1673-193x.2013.12.011]
FAN Lei,FAN Jian-chun,LI Xiao-qiu.Experimental study on the change of wall thickness for coiled tubing under cyclic bending and internal pressure[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2013,9(9):69.[doi:10.11731/j.issn.1673-193x.2013.12.011]
[4]龚银春,艾志久,付必伟,等.井斜角与摩擦对连续油管正弦屈曲的影响研究[J].中国安全生产科学技术,2016,12(10):50.[doi:10.11731/j.issn.1673-193x.2016.10.008]
GONG Yinchun,AI Zhijiu,FU Biwei,et al.Study on influence of inclination angle and friction on sinusoidal buckling of coiled tubing[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2016,12(9):50.[doi:10.11731/j.issn.1673-193x.2016.10.008]
[5]唐洋,何胤,李旺,等.深水水下测试树球阀剪切连续油管性能分析[J].中国安全生产科学技术,2019,15(8):106.[doi:10.11731/j.issn.1673-193x.2019.08.017]
TANG Yang,HE Yin,LI Wang,et al.Performance analysis of coiled tubing with ball value shearing on subsea test tree in deep water[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2019,15(9):106.[doi:10.11731/j.issn.1673-193x.2019.08.017]
[6]孙京,樊建春,何守杰,等.油气储罐罐壁焊缝静载拉伸检测试验研究*[J].中国安全生产科学技术,2021,17(1):67.[doi:10.11731/j.issn.1673-193x.2021.01.011]
SUN Jing,FAN Jianchun,HE Shoujie,et al.Experimental study on static load tensile testing of weld seam on oil and gas storage tank wall[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2021,17(9):67.[doi:10.11731/j.issn.1673-193x.2021.01.011]