|本期目录/Table of Contents|

[1]王国荣,伍伟,李明,等.基于正交法X形密封圈力学性能研究[J].中国安全生产科学技术,2017,13(3):144-150.[doi:10.11731/j.issn.1673-193x.2017.03.023]
 WANG Guorong,WU Wei,LI Ming,et al.Study on mechanical properties of X-shape sealing ring based on orthogonal method[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2017,13(3):144-150.[doi:10.11731/j.issn.1673-193x.2017.03.023]
点击复制

基于正交法X形密封圈力学性能研究
分享到:

《中国安全生产科学技术》[ISSN:1673-193X/CN:11-5335/TB]

卷:
13
期数:
2017年3期
页码:
144-150
栏目:
现代职业安全卫生管理与技术
出版日期:
2017-03-31

文章信息/Info

Title:
Study on mechanical properties of X-shape sealing ring based on orthogonal method
文章编号:
1673-193X(2017)-03-0144-07
作者:
王国荣伍伟李明胡刚
西南石油大学 机电工程学院,四川 成 都 610500
Author(s):
WANG Guorong WU Wei LI Ming HU Gang
School of Mechatronic Engineering, Southwest Petroleum University, Chengdu Sichuan 610500, China
关键词:
X形密封圈力学性能正交试验本构模型
Keywords:
X-shape sealing ring mechanical properties orthogonal test constitutive model
分类号:
TB42
DOI:
10.11731/j.issn.1673-193x.2017.03.023
文献标志码:
A
摘要:
为研究X形(星形)密封圈在静、动密封工作时的力学性能,通过拟合实验数据得到橡胶Mooney-Rivilin模型参数,利用ABAQUS软件建立X形密封圈仿真模型,采用正交试验方法研究了预压缩量、介质压力、硬度、温度对密封圈静密封的影响,以及速度、摩擦系数对其动密封力学性能的影响。结果表明:密封圈在有介质压力时的应力分布更不均匀;在静密封过程中,影响密封圈最大Von Mises应力的因素主次顺序为:介质压力>预压缩量>温度>硬度,影响主密封面上最大接触应力的因素主次顺序为:介质压力>硬度>预压缩量>温度;在动密封过程中,内行程速度、摩擦系数对密封圈应力的影响更加显著。
Abstract:
In order to study the mechanical properties of X-shape (starlike) sealing ring in the static and dynamic sealing operation, the Mooney-Rivilin model parameters of rubber were obtained through fitting the experimental data, and a simulation model of X-shape sealing ring was established by ABAQUS software. The influence of pre-compression quantity, medium pressure, hardness and temperature on the static sealing of sealing ring was studied by using the orthogonal test method, as well as the influence of speed and friction coefficient on its mechanical properties of dynamic sealing. The results showed that the stress distribution of sealing ring with medium pressure is more uneven. In the process of static sealing, the important order of factors affecting the maximum Von Mises stress of sealing ring is medium pressure, compression, temperature and hardness from large to small, and the important order of factors affecting the maximum contact stress on the main sealing surface is medium pressure, hardness, pre-compression quantity and temperature from large to small. In the process of dynamic sealing, the influence of inward stroke speed and friction coefficient on the stress of sealing ring is more obvious.

参考文献/References:

[1]邹兵,丁德武,朱胜杰,等. 石化企业设备密封点泄漏检测技术研究[J]. 中国安全生产科学技术,2011,7(12): 192-196. ZOU Bing, DING Dewu,ZHU Shengjie, et al. Research on leakage detection for sealed points of petrochemical equipment[J].Journal of Safety Science and Technology, 2011,7(12): 192-196.
[2]文建军,丁波. 浮顶油罐密封圈油气分布数值模拟[J]. 中国安全生产科学技术,2016,12(2): 57-61. WEN Jianjun,DING Bo. Numerical simulation on oil vapor distribution in seal ring of floating roof tank[J].Journal of Safety Science and Technology, 2016,12(2): 57-61.
[3]Zhi Chen, Tinchao Liu, Jianming Li. The effect of the O-ring on the end face deformation of mechanical seals based on numerical simulation[J]. Tribology International,2016,97: 278-287.
[4]ZhiGuo Zeng, YunXia Chen, Rui Kang. The effects of material degradation on sealing performances of O-Rings[J]. Applied Mechanics and Materials,2013,328: 1004-1008.
[5]Meng Zhang, Ai Guo Yao, Yuan ZhengLuo,et,al. The rubber O-Ring seal structure simulation research of electromagnetic measurement while drilling instrument[J]. Applied Mechanics and Materials,2012,271-272: 1717-1721.
[6]Dian Xin Li, Hong Lin Zhao, Shi Min Zhang,et,al. Finite element analysis on the influence of Back-Up ring on the sealing effect of rubber O-Ring[J]. Advanced Materials Research,2011,199-200: 1595-1599.
[7]纪军,阎宏伟.气缸O型圈动密封及温度场有限元分析[J]. 机械设计与制造,2016(2): 8-11. JI Jun,YAN Hongwei. Finite element analysis on dynamic sealing characteristicsand temperature field of O-Ring[J].Machinery Design & Manufacture,2016(2): 8-11.
[8]Jing Wen, Xi Lu, Xiang Fu. Reliability Analysis of Y-Ring Rod Seal on the Servo Turret[J]. Applied Mechanics and Materials,2014,685: 212-216.
[9]田阔,姚山,杨通. 变压变温条件下Y形密封圈静密封特性分析[J]. 润滑与密封,2014,39(10): 82-87. TIAN Kuo, YAO Shan, YANG Tong. Analysis on static sealing characteristics of Y-ring at variable temperature and pressure condition[J].Lubrication Engineering, 2014,39(10): 82-87
[10]刘占军,邓忠林. X形变截面橡胶密封圈应力有限元分析[J]. 润滑与密封,2007,186(2): 127-129. LIU Zhanjun, DENG Zhonglin. Finite element analysis of stress on the rubber sealing X-ring change section[J].Lubrication Engineering, 2007,186(2): 127-129.
[11]韩传军,张瀚,张杰. 星形橡胶密封圈的密封特性分析及截面改进[J]. 机械设计与研究,2015,158(4): 90-94. HANChuanjun, ZHANG Han, ZHANGJie. Sealing performance analysis and cross section melioration of X-Ring[J].Machine Design & Research, 2015,158(4): 90-94.
[12]Chuanjun Han, Han Zhang, Jie Zhang. Structural design and sealing performance analysis of biomimetic sealing ring[J]. Applied Bionics and Biomechanics,2015: 1-11.
[13]朱艳峰,刘锋,黄小清,等. 橡胶材料的本构模型[J]. 橡胶工业,2006,53(2): 119-125. ZHU Yanfeng, LIU Feng, HUANG Xiaoqing,et al. Constitutive model of rubber materials[J]. China Rubber Industry, 2006, 53(2): 119-125.
[14]中国石油和化学工业协会. 硫化橡胶或热塑性橡胶拉伸应力应变性能的测定:GB/T 528-2009 [S].北京:中国标准出版社,2009.
[15]王国荣,胡刚,何霞,等. 往复密封轴用Y形密封圈密封性能分析[J]. 机械设计与研究,2014,30(6): 37-42. WANG Guorong, HU Gang, HE Xia, et al. Chen baokang sealing performance analysis of Y-ring used on reciprocating seal shaft[J]. Machine Design & Research,2014, 30(6): 37-42.
[16]徐芝纶.弹性力学 [M]. 北京: 高等教育出版社,2006.
[17]曲宝龙,徐华静,马卫国. 基于摩擦因数的封隔器胶筒优化设计[J]. 石油机械,2015,43(2): 83-87. QU Baolong, XU Huajing, MA Weiguo. Optimal design of packer rubber based on friction coefficient[J]. China Petroleum Machinery, 2015,43(2):83-87.

相似文献/References:

[1]刘 勇,徐志胜,颜 龙.滑石粉对阻燃聚丙烯土工格栅性能的影响[J].中国安全生产科学技术,2014,10(2):131.[doi:10.11731/j.issn.1673-193x.2014.02.022]
 LIU Yong,XU Zhi sheng,YAN Long.Influence of talc on flame retardant grid of PP[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2014,10(3):131.[doi:10.11731/j.issn.1673-193x.2014.02.022]
[2]王国荣,伍伟,李明,等.新型防突装置对封隔器胶筒力学性能影响研[J].中国安全生产科学技术,2016,12(4):158.[doi:10.11731/j.issn.1673-193x.2016.04.029]
 WANG Guorong,WU Wei,LI Ming,et al.Effect of new outburst prevention device on mechanical properties of packer rubber[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2016,12(3):158.[doi:10.11731/j.issn.1673-193x.2016.04.029]
[3]张嬿妮,陈少康,康付如,等.含氢氧化铝RTV-2硅橡胶泡沫的阻燃抑烟性能研究[J].中国安全生产科学技术,2018,14(5):155.[doi:10.11731/j.issn.1673-193x.2018.05.023]
 ZHANG Yanni,CHEN Shaokang,KANG Furu,et al.Study on flame retardancy and smoke suppression performance of RTV-2 silicone rubber foam containing aluminum hydroxide[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2018,14(3):155.[doi:10.11731/j.issn.1673-193x.2018.05.023]
[4]许文龙,周戟,刘朝峰,等.考虑爆裂影响的钢筋混凝土梁火灾温度场数值分析[J].中国安全生产科学技术,2019,15(9):33.[doi:10.11731/j.issn.1673-193x.2019.09.005]
 XU Wenlong,ZHOU Ji,LIU Chaofeng,et al.Numerical analysis on temperature field of reinforced concrete beam under fire considering spalling effect[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2019,15(3):33.[doi:10.11731/j.issn.1673-193x.2019.09.005]

备注/Memo

备注/Memo:
四川省青年科技基金项目(2017JQ0029)
更新日期/Last Update: 2017-03-30