|本期目录/Table of Contents|

[1]高玉坤,张敏,黄志安,等.高速列车运行中火灾状态结构安全分析[J].中国安全生产科学技术,2016,12(12):144-148.[doi:10.11731/j.issn.1673-193x.2016.12.025]
 GAO Yukun,ZHANG Min,HUANG Zhian,et al.Structural safety analysis on running high speed train in fire[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2016,12(12):144-148.[doi:10.11731/j.issn.1673-193x.2016.12.025]
点击复制

高速列车运行中火灾状态结构安全分析
分享到:

《中国安全生产科学技术》[ISSN:1673-193X/CN:11-5335/TB]

卷:
12
期数:
2016年12期
页码:
144-148
栏目:
现代职业安全卫生管理与技术
出版日期:
2016-12-30

文章信息/Info

Title:
Structural safety analysis on running high speed train in fire
文章编号:
1673-193X(2016)-12-0144-05
作者:
高玉坤张敏黄志安张英华
(1.北京科技大学 金属矿山高效开采与安全教育部重点实验室,北京 100083;2.北京科技大学 矿山避险技术研究中心,北京 100083)
Author(s):
GAO Yukun ZHANG Min HUANG Zhian ZHANG Yinghua
(1. Key Laboratory of High-Efficient Mining and Safety of Metal Mines of Ministry of Education, University of Science and Technology Beijing, Beijing 100083, China; 2. Mine Hedging Technology Research Center, University of Science and Technology Beijing, Beijing 100083, China)
关键词:
列车安全火灾结构强度温度场载荷
Keywords:
train safety fire structure strength temperature field load
分类号:
U459.3
DOI:
10.11731/j.issn.1673-193x.2016.12.025
文献标志码:
A
摘要:
为了分析高速列车火灾时在紧急制动以后运行的安全性,选取列车在隧道内运行的场景,通过FDS软件模拟得到火灾后车体内温度场,基于一维热传导理论得到车体结构的温度场分布,在车体结构材料本构中考虑高温对强度及刚度的弱化影响,通过ABAQUS计算列车在最大压缩载荷和拉伸载荷作用下的应力分布和垂向位移。通过分析得到车体大面积温度在500℃左右;最大压缩载荷下车体底架前部构件出现断裂失效,底架中间出现裂纹,中间的垂向位移在42~80 mm之间,最大拉伸载荷下车体损伤略小,车体未出现断裂,底架前部和中间的垂向位移在40~50 mm范围内;底架中间高温是导致断裂失效的最主要原因,在隔热设计中需要对此重点考虑。
Abstract:
In order to analyze the safety of high-speed train in fire after emergency braking, the scenario of train running in tunnel was selected. The temperature field in train after fire was simulated by using the FDS software, and the temperature field distribution of train body was obtained based on the one-dimensional heat conduction theory. The stress distribution and vertical displacement of train under the effect of the maximum compressive load and tensile load were calculated through ABAQUS by considering the weakening impact of high temperature on the strength and stiffness of train body structure material. The results showed that the temperature of the large area on train body is about 500℃. Under the maximum compression load, the fracture failure occurs in the front of train underframe, the cracks occur in the middle of underframe, and the vertical displacement of the middle was between 42mm and 80mm. Under the maximum tensile load, the damage of train body is slightly smaller, there are no cracks on the train body, and the vertical displacement of the front and the middle of underframe is in the range of 40mm to 50mm. The fracture failure is mainly due to the high temperature in the middle of underframe, so it should be paid more attention in the insulation design.

参考文献/References:

[1]商跃进.动车组车辆构造与设计[M].成都:西南交通大学出版社,2010:272.
[2]姚小林, 陈俊敏.旅客行李对高速客车车厢火源热释放速率的影响研究[J].中国安全生产科学技术,2014,10(2):51-56. YAO Xiaolin,CHEN Junmin.Study on influence of passenger baggage on heat release rate of high-speed passenger train compartment [J].Journal of Safety Science and Technology,2014,10(2):51-56.
[3]张相宁,李明高,胡震. 动车组车体防火强度及刚度计算分析[J].机械研究与应用,2012(4):75-78. ZHANG Xiangning,LI Minggao,HU Zhen. The calculation and analysis of EMU body fire strength and stiffness[J]. Mechanical Research & Application,2012(4):75- 78.
[4]J A Capote,D Alvearn, O Abreu. Analysis of evacuation procedures in high speed trains fires [J]. Fire Safety Journal,2012(49):35-46.
[5]DIN.DIN 5510-4 Preventive fire protect in railway vehicle parts 4: Part 4:vehicle design; safety requirements [S]. Deutsches Institut Fur Normung e.V,Germany,1988.
[6]戚宜欣,杜红兵,周心权,等.运动受限空间内火灾研究的现状与展望[J].中国安全科学学报,2000,10(4):6-10. QI Yixin, DU Hongbing, ZHOU Xinquan,et al. Present situation and prospect of fire research in confined space of movement[J].China Safety Science Journal,2000,10(4):6-10.
[7]Haukur Ingason. Model scale railcar fire tests [J]. Fire Safety Journal,2007(42):271-282.
[8]Manabu Tsukahara, Yusuke Koshiba, Hideo Ohtani. Effectiveness of downward evacuation in a large-scale subway fire using Fire Dynamics Simulator[J]. Tunnelling and Underground Space Technology, 2011(26):573-581.
[9]Jae Seong Roh,Hong Sun Ryou,Won Hee Park. CFD simulation and assessment of life safety in a subway train fire[J]. Tunnelling and Underground Space Technology, 2009,6(24):447-453.
[10]周素霞,杨月,谢基龙. 高速列车制动盘瞬态温度和热应力分布仿真分析[J].机械工程学报,2011,47(22):126-131. ZHOU Suxia,YANG Yue, XIE Jilong. Analysis of transient temperature and thermal stress distribution on the high-speed strain brake disk simulation[J]. Journal of Mechanical Engineering, 2011,47(22):126-131.
[11]阙红波,钱坤才,金文伟. 高速列车制动盘温度及热应力仿真分析[J]. 机车车辆工艺,2009(4):9-11. QUE Hongbo,QIAN Kuncai,JIN Wenwei. Simulation and analysis of the brake discs for high speed emu[J]. Locomotive & Rolling Stock Technology,2009(4):9-11.
[12]张凯函. 高速试验列车车体强度研究与结构优化[D].北京:北京交通大学,2013.
[13]陈俊敏,姚小林,阎刚,等.CRH1型动车组一等座车厢火源热释放速率研究[J].中国安全生产科学技术,2014,10(1):5-10. CHEN Junmin,YAO Xiaolin,YAN Gang,et al.Study on heat release rate of first class compartment of CRH1 EMU train[J].Journal of Safety Science and Technology,2014,10(1):5-10.
[14]张豫. CRH5动车组卧铺车体结构优化设计[D].北京:北京交通大学,2011.
[15]赵勇,唐国荣,倪光斌,等.我国高速铁路隧道主要技术标准和关键技术[J].铁道经济研究,2006(6):25-29,38. ZHAO Yong,TANG Guorong,NI Guangbin,et al. The main technical standards and main techniques of high-speed railway tunnels research in China[J]. Railway Economics Research,2006(6):25-29,38.
[16]赵勇.我国铁路客运专线隧道主要技术标准研究[D].北京:北京交通大学,2006.
[17]EN12663-2000. Railway applications-Structural requirements of railway vehicle bodies [S]. Brussels,Central Secretariat:2000.

相似文献/References:

[1]颜向农,肖国清,李思慧.火灾疏散中羊群效应的理论探析与模拟研究[J].中国安全生产科学技术,2011,7(4):46.
 YAN Xiang-nong,XIAO Guo-qing,LI Si-hui.Theoretical analysis and simulation study of herd behaviour in fire evacuation[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2011,7(12):46.
[2]龙腾腾,王辉东,王秋华,等.高层建筑火灾事故致因理论模型构建研究[J].中国安全生产科学技术,2011,7(5):16.
 Long tengteng,Wang huidong,Wang qiuhua,et al.Research on model building with high-rise building fire accident-causing theory[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2011,7(12):16.
[3]张小良.起居室典型材料的火灾温度场实验研究[J].中国安全生产科学技术,2011,7(9):28.
 ZHANG Xiao-liagn.Test study on temperature field of typical materials in residential fire[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2011,7(12):28.
[4]沈一洲,朱国庆,黄丽丽,等.黄磷储罐火灾临界安全距离理论分析与数值模拟[J].中国安全生产科学技术,2011,7(10):27.
 SHEN Yi-zhou,ZHU Guo-qing,HUANG Li-li,et al.The Theory Analysis and Numerical Simulation on Critical Safety Distance of Yellow Phosphorus Tanks Fire[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2011,7(12):27.
[5]唐永,邢志祥.高层建筑火灾安全疏散研究述评[J].中国安全生产科学技术,2011,7(10):56.
 TANG Yong,XING Zhi-xiang.Review on study of evacuation?in high-rise?bulding fire[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2011,7(12):56.
[6]任常兴,张欣,张网,等.易燃易爆危险品道路运输火灾事故应急区域的确定方法[J].中国安全生产科学技术,2012,8(2):97.
 REN Chang xing,ZHANG Xin,ZHANG Wang,et al.Determination methods of emergency region for fire accident of flammable and explosive hazardous materialshazmats) in transportation by road[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2012,8(12):97.
[7]赵道亮.火灾与爆炸灾害控制课程建设与教学研究[J].中国安全生产科学技术,2011,7(11):82.
 ZHAO Dao-liang.Course construction and teaching research on control of fire and explosion calamity[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2011,7(12):82.
[8]张曦,姜丰.蒙德法在火电厂液氨储罐评价单元的应用[J].中国安全生产科学技术,2012,8(2):189.
 ZHANG Xi,JIANG Feng.Application of ICI mond method in the ammonia storage tank unit of thermal power plant[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2012,8(12):189.
[9]解志龙.CFAST在大空间火灾模拟中的应用研究[J].中国安全生产科学技术,2012,8(4):69.
 XIE Zhi long.Application of CFAST in fire simulation of large scale buildings[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2012,8(12):69.
[10]宫博,许开立,李德顺.基于属性识别模型的建筑物火灾危险性评价[J].中国安全生产科学技术,2012,8(5):76.
 GONG Bo,XU Kai li,LI De shun.Hazard assessment of building fire based on attribute recognition model[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2012,8(12):76.

备注/Memo

备注/Memo:
-
更新日期/Last Update: 2017-01-13