|本期目录/Table of Contents|

[1]李勐,张宏,王宝栋,等.基于有限元的含腐蚀缺陷P110油管失效分析与安全评价[J].中国安全生产科学技术,2016,12(11):93-99.[doi:10.11731/j.issn.1673-193x.2016.11.016]
　LI Meng,ZHANG Hong,WANG Baodong,et al.Failure analysis and safety evaluation on P110 oil tube containing corrosion defects based on finite element method[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2016,12(11):93-99.[doi:10.11731/j.issn.1673-193x.2016.11.016]
点击复制

基于有限元的含腐蚀缺陷P110油管失效分析与安全评价
分享到：

《中国安全生产科学技术》[ISSN:1673-193X/CN:11-5335/TB]

卷:
12
期数:
2016年11期
页码:
93-99
栏目:
现代职业安全卫生管理与技术
出版日期:
2016-11-30

文章信息/Info

Title:
Failure analysis and safety evaluation on P110 oil tube containing corrosion defects based on finite element method
文章编号:
1673-193X(2016)-11-0093-07
作者:
李勐; 张宏; 王宝栋; 刘啸奔
（中国石油大学（北京）机械与储运工程学院，北京 102249）
Author(s):
LI Meng;  ZHANG Hong;  WANG Baodong;  LIU Xiaoben
(College of Mechanical and Transportation Engineering, China University of Petroleum-Beijing, Beijing 102249, China)
关键词:
腐蚀缺陷; P110油管; 安全评价; 复杂工作荷载; 失效模式
Keywords:
P110 oil tube;  corrosion defect;  complicated working load;  failure mode;  safety evaluation
分类号:
X937
DOI:
10.11731/j.issn.1673-193x.2016.11.016
文献标志码:
A
摘要:
含有腐蚀缺陷油管在复杂的工作荷载下容易发生失效。建立了在内压与轴向力共同作用的复杂工作载荷下，含椭球型蚀坑缺陷与轴向沟槽型缺陷两种腐蚀缺陷的油管有限元模型。基于该模型研究了不同载荷工况下缺陷宽度、深度与长度对油管安全性及失效模式的影响。研究结果表明：腐蚀位置深度较浅时，椭球型蚀坑缺陷更危险，油管主要发生由轴力引发的断裂失效；腐蚀位置深度较深时，轴向沟槽型缺陷更危险，主要发生由内压引发的破裂失效。研究成果可为含腐蚀缺陷油管的安全评估提供依据。
Abstract:
The oil tube containing corrosion defects are prone to occur failure under complicated working load. A finite element model of oil tube containing two types of corrosion defect, including the elliptical corrosion pit defect and the axial groove defect, under the complicated working loads with the combined action of internal pressure and axial force was established. The influence of defect width, depth and length on the safety and failure modes of oil tube under different load conditions were investigated. The results showed that when the corrosion location depth is shallow, the ellipsoidal corrosion pit defect is more dangerous, and the fracture failure caused by axial force occurs mainly on the oil tube. When the corrosion location depth is deep, the axial groove defect is more dangerous, and the fracture failure caused by internal pressure occurs mainly. It can provide basis for the safety evaluation on oil tube containing corrosion defects.

参考文献/References:

［1］Batte A D, Fu B, Kirkwood M G, et al. New methods for determining the remaining strength of corroded pipeline［A］. International Conference on Offshore Mechanics and Arctic Engineering［C］. OMAE. Yokohama, Japan, 1997: 221-228.
[2]CHOI J B, GOO B K, KIM J C, et al. Development of limit load solutions for corroded gas pipelines［J］. International Journal of Pressure Vessels and Piping, 2003(80): 121-128.
[3]陈严飞, 李昕, 周晶. 轴向长腐蚀管道极限承载力研究［J］. 船舶力学, 2009, 13(5):748-756. CHEN Yanfei, LI Xin, ZHOU Jing. Limit load capacity of pipes with long longitudinal corrosion ［J］. Journal of Ship Mechanics, 2009, 13(5):748-756.
[4]帅健, 张春娥, 陈福来. 非线性有限元法用于腐蚀管道失效内压预测［J］. 石油学报, 2008, 29(6):933-937. SHUAI Jian,ZHANG Chune, CHEN Fulai. Prediction of failure pressure in corroded pipelines based on non-linear finite element analysis ［J］. Acta Petrolei Sinica , 2008, 29(6):933-937.
[5]STEPHENS D R, LEIS B N. Development of an alternative criterion for residual strength of corrosion defects in moderateto high-toughness pipe［A］. Proceedings of International Pipeline Conference［C］. Calgary, Alberta, Canada, September 10-13, 2000.
[6]LEIS B N, STEPHENS D R. An alternative approach to assess the integrity of corroded line pipe-Part I: current status and Part II: alternative criterion［A］. Proceedings of the 7th International Offshore and Polar Engineering Conference［C］. Honolulu, USA, May 25-30, 1997.
[7]FEKETE G, VARGA L. The effect of the width to length ratios of corrosion defects on the burst pressures of transmission pipelines［J］. Engineering Failure Analysis, 2012(21): 21-30.
[8]肖国清, 冯明洋, 张华兵,等. 含腐蚀缺陷的X80高钢级管道失效评估研究［J］. 中国安全生产科学技术, 2015, 11(6):126-131. XIAO Guoqing, FENG Mingxiang, ZHANG Huabing, et al. Study on failure assessment for X80 high-grade pipeline with corrosion defects ［J］. Journal of Safety Science and Technology, 2015, 11(6):126-131.
[9]彭世金, 汤海平, 丁雅萍,等. 管道腐蚀安全评价模型特性研究［J］. 中国安全生产科学技术, 2015, 11(3): 172-178. PENG Shijin, TANG Haiping, DING Yaping, et al. Study on characteristics of safety assessment model on pipeline corrosion ［J］. Journal of Safety Science and Technology, 2015, 11(3): 172-178.
[10]周思柱, 何迪, 吕志鹏. 用有限元方法研究含缺陷油管失效判据［J］. 石油矿场机械, 2006, 35 (6): 19-22. ZHOU Sizhu, HE Di,LYU Zhipeng. Study the waste standard of the defective oil pipe by finite element method ［J］. Oil Field Equipment, 2006, 35 (6): 19-22.
[11]HU X W, ZHOU C F, DUAN M L, et al. Reliability analysis of marine risers with narrow and long corrosion defects under combined loads［J］. Petroleum Science, 2014(11):139-146.
[12]Xia M Y, Duan Q Q, Liu X B, et al. Residual Strength Analysis of Oil Tubes with Corrosion Defect［J］. Materials Science Forum, 2016(850):950-956.
[13]ISO/TR 10400:2007,The International Organization for Standardization［S］.
[14]API Specification 5CT-2005,Specification for Casing and Tubing［S］.
[15]马彬, 帅健, 刘德旭, 等．基于有限元法对爆破试验预测埋地管道极限载荷的准确性分析［J］. 天然气工业, 2013,33(6):108-112. MA Bin, SHUAI Jian, LIU Dexu, et al. A finite-element-based analysis of the accuracy in bursting tests predicting the ultimate load of a buried pipeline ［J］. Natural Gas Industry, 2013,33(6):108-112.
[16]苏晨亮, 李昕, 周晶. 轴向腐蚀缺陷宽度对管道极限内压荷载的影响［J］. 油气储运, 2014(7):723-728. SU Chenliang, LI Xin, ZHOU Jing. Impacts of axial corrosion width on ultimate internal pressure load of pipeline［J］. Oil & Gas Storage and Transportation, 2014(7):723-728.

相似文献/References:

[1]范晓勇,淡勇,高勇,等.天然气管道局部等效应力及塑性变形评估[J].中国安全生产科学技术,2016,12(8):135.[doi:10.11731/j.issn.1673-193x.2016.08.023]
　FAN Xiaoyong,DAN Yong,GAO Yong,et al.Evaluation on local equivalent stress and plastic deformation for natural gas pipeline[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2016,12(11):135.[doi:10.11731/j.issn.1673-193x.2016.08.023]
[2]彭世金,汤海平,丁雅萍,等.管道腐蚀安全评价模型特性研究[J].中国安全生产科学技术,2015,11(3):172.[doi:10.11731/j.issn.1673-193x.2015.03.028]
　PENG Shi-jin,TANG Hai-ping,DING Ya-ping,et al.Study on characteristics of safety assessment model on pipeline corrosion[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2015,11(11):172.[doi:10.11731/j.issn.1673-193x.2015.03.028]
[3]肖国清,冯明洋,张华兵,等.含腐蚀缺陷的X80高钢级管道失效评估研究[J].中国安全生产科学技术,2015,11(6):126.[doi:10.11731/j.issn.1673-193x.2015.06.020]
　XIAO Guo-qing,FENG Ming-yang,ZHANG Hua-bing,et al.Study on failure assessment for X80 high-grade pipeline with corrosion defects[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2015,11(11):126.[doi:10.11731/j.issn.1673-193x.2015.06.020]
[4]朱豪豪,郭海林,闫生栋,等.含腐蚀缺陷埋地管道在外力作用下的承载力研究[J].中国安全生产科学技术,2018,14(11):70.[doi:10.11731/j.issn.1673-193x.2018.11.011]
　ZHU Haohao,GUO Hailin,YAN Shengdong,et al.Study on bearing capacity of buried pipeline containing corrosion defects under external force[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2018,14(11):70.[doi:10.11731/j.issn.1673-193x.2018.11.011]
[5]徐鲁帅,凌晓,马娟娟,等.基于DE-BPNN模型的含腐蚀缺陷管道失效压力预测*[J].中国安全生产科学技术,2021,17(3):91.[doi:10.11731/j.issn.1673-193x.2021.03.014]
　XU Lushuai,LING Xiao,MA Juanjuan,et al.Prediction on failure pressure of pipeline containing corrosion defects based on DE-BPNN[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2021,17(11):91.[doi:10.11731/j.issn.1673-193x.2021.03.014]

备注/Memo

备注/Memo:
国家自然科学基金项目（51309236）
更新日期/Last Update: 2017-01-04