[1]唐绍猛,刘德俊,王光辉.油水两相流弯管处安全分析[J].中国安全生产科学技术,2016,12(10):96-101.[doi:10.11731/j.issn.1673-193x.2016.10.016]
TANG Shaomeng,LIU Dejun,WANG Guanghui.Safety analysis on oil-water two-phase flow in curved pipe[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2016,12(10):96-101.[doi:10.11731/j.issn.1673-193x.2016.10.016]
点击复制
油水两相流弯管处安全分析
TANG Shaomeng,LIU Dejun,WANG Guanghui.Safety analysis on oil-water two-phase flow in curved pipe[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2016,12(10):96-101.[doi:10.11731/j.issn.1673-193x.2016.10.016]
《中国安全生产科学技术》[ISSN:1673-193X/CN:11-5335/TB]
- 卷:
- 12
- 期数:
- 2016年10期
- 页码:
- 96-101
- 栏目:
- 现代职业安全卫生管理与技术
- 出版日期:
- 2016-10-30
文章信息/Info
- Title:
- Safety analysis on oil-water two-phase flow in curved pipe
- Keywords:
- two-phase flow; safety; curved pipe; water cut; cavitation corrosion
- 分类号:
- X937
- 文献标志码:
- A
- 摘要:
- 针对油水两相流经过弯管时的流向改变会导致流体速度和压力发生突变，造成发生静电事故和腐蚀事故风险上升 的不利影响，提出了RSM模型和Mixture模型相结合的安全分析方法。该方法对不同入口速度和含水率的油水两相流进行 数值模拟，并用Origin软件拟合了进口最大允许流速与管径及含水率的经验关系。结果表明，在含水率和入口速度一定 时，随着管径的增加，弯管处的最大速度呈现逐渐减小的趋势：当管径和入口速度一定时，随着含水率的增加，弯管处 的最大速度也逐渐减小。最大压力出现在弯管外拱壁处，最小压力出现在弯管内侧拱壁处。在实际生产中，增加弯管下 游直管段内侧壁的壁厚，可有效防止空化腐蚀所造成的危害；通过含水率来确定安全流速，可有效降低静电事故的风险 。
- Abstract:
- The flow direction change of oil-water two-phase flow passing through the curved pipe will cause the sudden change of fluid velocity and pressure, which leads to the rise of risk about electrostatic accident and corrosion accident. The method combining RSM model with Mixture model was proposed. The numerical simulation of oil-water two-phase flow with different inlet velocity and water cut was carried out, and the empirical relationship among maximum allowable inlet flow velocity, pipe diameter and water cut was fitted by using Origin software. The results showed that when the water cut and inlet velocity are constant, the maximum velocity in the curved pipe gradually decreases with the increase of pipe diameter. When the pipe diameter and inlet velocity are constant, the maximum velocity in the curved pipe decreases gradually with the increase of water cut also. The maximum pressure occurs at the external arch wall of curved pipe, and the minimum pressure occurs at the internal arch wall of curved pipe. In practical production, increasing the wall thickness of internal wall in the straight pipe at the downstream of curved pipe can effectively prevent the hazard caused by cavitation corrosion. The safety flow velocity can be determined by water cut, which can effectively reduce the risk of electrostatic accidents.
参考文献/References:
［1］钱益斌, 杨利民. 管道内油水两相流动研究进展［J］. 化工进展, 2009, 28(4):566-573.
QIAN Yibin, YANG Limin. Research advances in oil-water two-phase flow［J］. Chemical Industry &
Engineering Progress, 2009, 28(4):566-573.
［2］杨笑源, 赵晓刚. 管输油流静电产生影响因素分析［J］. 中国安全科学学报, 2015, 25(5):87-91.
YANG Xiaoyuan,ZHAO Xiaogang.Analysis of factors affecting static electricity generated in petroleum
pipeline［J］. China Safety Science Journal, 2015, 25(5):87-91.
［3］杨笑源, 赵晓刚, 郭湛,等. 基于GM(1,N)模型的管输油流静电数值预测 ［J］. 后勤工程学院学报, 2016, 32
(2).
YANG Xiaoyuan,ZHAO Xiaogang, GUO Zhan, et al. The electrostatic numerical prediction in oil pipeline
transportation based on GM(1,N) model［J］. Journal of Logistical Engineering University, 2016, 32(2).
［4］Talhi M, Fofana I, Flazi S. Impact of various stresses on the streaming electrification of
transformer oil［J］. Journal of Electrostatics, 2016, 79:25-32.
［5］王菊芬, 孟浩龙. 输油管道内油流带电电流的计算［J］. 中国石油大学学报(自然科学版), 2010, 34(5):131-
135.
WANG Jufen, MENG Haolong. Calculation of oil flow electrification current in pipeline［J］. Journal of
China University of Petroleum, 2010, 34(5):131-135.
［6］郭光臣，董文兰，张志廉.油库设计与管理［M］.东营：中国石油大学出版社, 2006:507-508.
［7］梁光川, 聂畅, 刘奇,等. 基于FLUENT的输油管道弯头冲蚀分析［J］. 腐蚀与防护, 2013(9):822-824.
LIANG Guangchuan, NIE Chang, LIU Qi , et al. Erosion-corrosion analysis of oil pipeline elbow based on
FLUENT［J］. Corrosion ＆ Protection, 2013(9):822-824.
［8］Lee G H, Pouraria H, Seo J K, et al. Burst strength behaviour of an aging subsea gas pipeline elbow
in different external and internal corrosion-damaged positions［J］. International Journal of Naval
Architecture & Ocean Engineering, 2015, 7(3):435-451.
［9］Pouraria H, Seo J K, Paik J K. A numerical study on water wetting associated with the internal
corrosion of oil pipelines［J］. Ocean Engineering, 2016, 122:105-117.
［10］Ismail I, Misnan S, Izwan Ismail A S, et al. Pressure Drop and Water Holdup of Malaysian Crude Oil
and Water Two-Phase Flow in Pipes［J］. Advanced Materials Research, 2014, 931-932:1248-1252.
［11］ Ismail A S I, Ismail I, Zoveidavianpoor M, et al. Experimental investigation of oil-water two-
phase flow in horizontal pipes: Pressure losses, liquid holdup and flow patterns［J］. Journal of
Petroleum Science & Engineering, 2015, 127:409-420.
［12］Jing J, Sun J, Tan J, et al. Investigation on flow patterns and pressure drops of highly viscous
crude oil-water flows in a horizontal pipe［J］. Experimental Thermal & Fluid Science, 2016, 72:88-96.
［13］Al-Wahaibi T, Yusuf N, Al-Wahaibi Y, et al. Experimental study on the transition between
stratified and non-stratified horizontal oil-water flow［J］. International Journal of Multiphase Flow,
2012, 38(1):126-135.
［14］马皓晨, 代翠, 董亮,等. 90°方形弯管内部流场PIV试验［J］. 水利水电科技进展, 2013(5):31-34.
MA Haochen, DAI Cui, DONG Liang, et al. PIV experiment of inner flow field in 90° bending ducts with
square section［J］. Advances in Science & Technology of Water Resources, 2013(5):31-34.
［15］卢春, 赵靖. 弯管内三维湍流场的实验研究［J］. 化学工业与工程技术, 2013, 34(1):48-50.
LU Chun, ZHAO Jing. Experimental study of 3-dimensional turbulent flow field in a bend pipe［J］.
Journal of Chemical Industry & Engineering, 2013, 34(1):48-50.
［16］许承, 郭荣伟. 三维弯管内分离流场的试验研究［J］. 航空学报, 1994, 15(9):1095-1099.
XU Cheng, GUO Rongwei. Experimental investigation for separated flow in three-dimensional bend duct［J］
. Acta Aeronautica et Astronautica Sinica, 1994, 15(9): 1095-1099.
［17］马坤, 赖焕新. 大曲率弯道中拟塑性流体的湍流数值计算研究［J］. 工程热物理学报, 2016(5):993-998.
MA Kun ,LAI Huanxin. Numerical study of turbulent flows of a pseudoplastic fluid in a strongly curved
square duct［J］. Journal of Engineering Thermophysic, 2016(5):993-998.
［18］董亮, 刘厚林, 代翠,等. 不同湍流模型在90°弯管数值模拟中的应用［J］. 华中科技大学学报(自然科学版),
2012, 40(12):18-22.
DONG Liang. LIU Houlin,DAI Cui,et al.Application of different turbulent models to numerically simulating
90° duct bends［J］. Journal of Huazhong University of Science & Technology, 2012，40(12):18-22.
［19］Kim J, Yadav M, Kim S. Characteristics of Secondary Flow Induced by 90-Degree Elbow in Turbulent
Pipe Flow［J］. Engineering Applications of Computational Fluid Mechanics, 2014, 8(2):229-239.
［20］Wang Y, Dong Q, Wang P. Numerical Investigation on Fluid Flow in a 90-Degree Curved Pipe with
Large Curvature Ratio［J］. Mathematical Problems in Engineering, 2015, 2015(2).
［21］Shi H. A study of oil-water flow in large diameter horizontal pipelines［D］ . Columbus: The
University of Ohio, 2001.
相似文献/References:
[1]李红民.FTA在高层建筑防火安全管理中的运用[J].中国安全生产科学技术,2010,6(4):153.
LI Hong-min.Application of FTA in fire prevention management of high-rise building analysis[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2010,6(10):153.
[2]蔡勇,姚向宇.关于火电基建项目中安全管理工作的探讨[J].中国安全生产科学技术,2010,6(4):165.
CAI Yong,YAO Xiang-yu.Discussing about the security management of capital construction project in thermal power plant[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2010,6(10):165.
[3]刘伟虹.从尊重生命谈企业安全教育培训[J].中国安全生产科学技术,2010,6(4):169.
LIU Wei-hong.Form the dignity of life to discuss the enterprise safety education[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2010,6(10):169.
[4]史亚杰,陈艳秋.航空安全信息管理的问题与对策[J].中国安全生产科学技术,2010,6(3):116.
SHI Ya-jie,CHEN Yan-qiu.Problems and countermeasures on aviation safety information management[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2010,6(10):116.
[5]伍彬彬,李竞,冀铮,等.毒气泄漏事故监测预警系统的研究[J].中国安全生产科学技术,2011,7(5):52.
WU Bin-bin,LI Jing,JI Zheng,et al.Study on monitoring and predicting platform of toxic gas leakage accident situation[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2011,7(10):52.
[6]王瑜,刘毅.欧美、日本与中国个体防护标准比对[J].中国安全生产科学技术,2010,6(4):76.
WANG Yu,LIU Yi.Comparison of personal protective standards in Europe, America, Japan and China[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2010,6(10):76.
[7]刘杰.工作安全分析（JSA）模式在施工现场实践研究[J].中国安全生产科学技术,2011,7(9):190.
LIU Jie.The Practicable Research on Job Safety Analysis Format in Construction Project Area[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2011,7(10):190.
[8]孙有力.推进企业安全自主型员工队伍建设[J].中国安全生产科学技术,2011,7(9):221.
SUN You-li.Promote construction of safety independent staff[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2011,7(10):221.
[9]彭建华.公路建设项目安全生产预警机制研究[J].中国安全生产科学技术,2011,7(10):203.
PENG Jian-hua.Study on safety early-warning mechanism of highway construction project[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2011,7(10):203.
[10]郭强,冯显富.石化工程建设项目安全管理的内部控制研究[J].中国安全生产科学技术,2011,7(10):208.
GUO Qiang,FENG Xian-fu.Study on internal control for safety management of petrochemical construction projects[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2011,7(10):208.
备注/Memo
- 备注/Memo:
- -
