|本期目录/Table of Contents|

[1]蒋金辰,赵博,王国荣,等.一种新型煤层气旋转控制头旋转总成的温升影响因素分析[J].中国安全生产科学技术,2016,12(3):42-48.[doi:10.11731/j.issn.1673-193x.2016.03.008]
 JIANG Jinchen,ZHAO Bo,WANG Guorong,et al.Analysis on influence factors of temperature rise in rotary assembly of a new CBM rotary control head[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2016,12(3):42-48.[doi:10.11731/j.issn.1673-193x.2016.03.008]
点击复制

一种新型煤层气旋转控制头旋转总成的温升影响因素分析
分享到:

《中国安全生产科学技术》[ISSN:1673-193X/CN:11-5335/TB]

卷:
12
期数:
2016年3期
页码:
42-48
栏目:
学术论著
出版日期:
2016-03-30

文章信息/Info

Title:
Analysis on influence factors of temperature rise in rotary assembly of a new CBM rotary control head
文章编号:
1673-193X(2016)-03-0042-07
作者:
蒋金辰1赵博2王国荣1陶思宇1
(1. 西南石油大学 机电工程学院,四川 成都 610500; 2. 中国石油集团钻井工程技术研究院 北京石油机械厂,北京 100083)
Author(s):
JIANG Jinchen1 ZHAO Bo2 WANG Guorong1 TAO Siyu1
(1. School of Mechatronic Engineering, Southwest Petroleum University, Chengdu Sichuan 610500, China; 2. Beijing Petroleum Machinery Co., CNPC Drilling Research Institute, Beijing 100083, China)
关键词:
煤层气旋转控制头旋转总成温度场影响因素
Keywords:
coal bed methane (CBM) rotary control head rotary assembly temperature field influence factors
分类号:
X941
DOI:
10.11731/j.issn.1673-193x.2016.03.008
文献标志码:
A
摘要:
可靠有效的冷却润滑系统是旋转控制头安全、高效工作的保证。结合现有成熟技术,设计出一种集冷却润滑系统与旋转总成为一体的新型旋转控制头。为确保其旋转总成冷却润滑的要求,建立1/2实体三维数值模型,分析了密封井压、钻杆转速、井口偏心距对其温升的影响。结果表明:三影响因素均是旋转总成温升的主要因素,随三者的增大旋转总成的热平衡最高温升呈非线性增大,但在其运转所允许的温升范围内;三影响因素对旋转总成的动密封系统温升的影响最为明显,说明动密封系统是旋转总成的主要热源点;井口偏心距的增大较另外两种影响因素的增大,对旋转总成的热平衡最高温升值影响更大,进一步证实了旋转控制头安装过程中减少井口偏心距的重要性。
Abstract:
The reliable and effective cooling and lubrication system is the assurance for safe and efficient working of rotary control head. Combined with the existing mature technology, a new rotary control head with the cooling and lubrication system and rotary assembly as a whole was designed. In order to satisfy the cooling and lubricating requirements of rotary assembly, a 3D numerical model representing 1/2 solid was built, and the influence of sealing pressure, rotation speed of drill pipe and wellhead eccentricity on the temperature rise in rotary assembly was analyzed. The results showed that all the three influence factors are the main factors of temperature rise in rotary assembly. The maximum temperature rise in thermal equilibrium of rotary assembly present non-linear increase with the increase of each factor, but within the allowable range of temperature rise for operation. The influence of three factors on the temperature rise of dynamic sealing system of rotary assembly is the most obvious, which explains that the dynamic sealing system is the main heat source of rotary assembly. Compared with the increase of other two influence factors, the increase of wellhead eccentricity has a larger influence on the maximum temperature rise in thermal equilibrium of rotary assembly, which further confirms the importance of reducing the wellhead eccentricity during the installation process of rotating control head.

参考文献/References:

[1]张卫东, 孟庆春, 魏韦. 煤层气勘探开发技术进展与展望[J]. 中国煤层气, 2009, 6(5): 11-13. ZHANG Weidong, MENG Qingchun, WEI Wei. Prospect of technology for exploration and development of CBM[J]. China Coalbed Methane, 2009, 6(5): 11-13.
[2]王益山, 王合林, 刘大伟, 等. 中国煤层气钻井技术现状及发展趋势[J]. 天然气工业, 2014, 34(8): 87-91. WANG Yishan, WANG Helin, LIU Dawei, et al. State-of-the-art and developing trend of CBM drilling technologies in China[J]. Natural Gas Industry, 2014, 34(8): 87-91.
[3]毕雪亮, 张楠, 陈勋,等. 基于模糊综合评判法的欠平衡钻井方式优选[J]. 断块油气田, 2015, 22(1): 116-119. BI Xueliang ZHANG Nan CHEN Xun, et al. Optimization of underbalanced drilling based on fuzzy comprehensive evaluation methods[J]. Fault-Block Oil & Gas Flied, 2015, 22(1): 116-119.
[4]魏晓东, 王国荣, 王斌,等. 煤层气欠平衡钻井专用旋转控制头方案设计[J]. 石油矿场机械, 2010, 39(9): 29-33. WEI Xiaodong, WANG Guorong, WANG Bin, et al. Special RCH’s project design in CBM under-balanced drilling[J]. Oil Field Equipment, 2010, 39(9): 29-33.
[5]邓四二, 贾群义, 薛进学. 滚动轴承设计原理(第2版)[M].北京: 中国标准出版社, 2014: 75-99.
[6]孙立刚, 张铎高. 高压载荷下旋转动密封结构转动力矩分析[J]. 固体火箭技术, 2012, 35(2): 244-247. SUN Ligang, ZHANG Duo. Analyzed on turning moment of revolving seal structure under high pressure load[J]. Journal of Solid Rocket Technology, 2012, 35(2): 244-247.
[7]赵军, 李全明. 氧化速度对硫化矿石堆积体温度场变化影响的数值模拟方法研究[J]. 中国安全生产科学技术, 2015, 11(4): 59-63. ZHAO Jun, LI Quanming. Study on numerical simulation method of influence by oxidation rate to temperature field variation of sulfide ore deposit[J]. Journal of Safety Science and Technology, 2015, 11(4): 59-63.
[8]赵飞. 纯电动汽车用永磁电机温度场分析[D]. 合肥: 合肥工业大学, 2013.
[9]李友荣, 吴双应. 传热学[M]. 北京: 科学出版社, 2012: 3-12, 15-39.
[10]SY/T 5964-2006. 钻井井控装置组合配套、安装调试与维护[S].2006.

相似文献/References:

[1]董贺,王佰顺,李春亭.穿层预抽钻孔倾角与煤层气抽采效果关系的研究[J].中国安全生产科学技术,2015,11(2):99.[doi:10.11731/j.issn.1673-193x.2015.02.016]
 DONG He,WANG Bai-shun,LI Chun-ting.Study on relationship between angle of penetration boreholes for predrainage in coal seam and gas drainage effect[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2015,11(3):99.[doi:10.11731/j.issn.1673-193x.2015.02.016]
[2]张勇昌,杨永国,罗金辉.基于优化组合赋权的煤层气开发风险评价研究[J].中国安全生产科学技术,2016,12(5):91.[doi:10.11731/j.issn.1673-193x.2016.05.016]
 ZHANG Yongchang,YANG Yongguo,LUO Jinhui.Study on risk assessment of CBM development based on optimized combination weighting[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2016,12(3):91.[doi:10.11731/j.issn.1673-193x.2016.05.016]
[3]张永利,尚文龙,马玉林,等.微波作用下煤层渗透性变化规律实验研究[J].中国安全生产科学技术,2018,14(8):48.[doi:10.11731/j.issn.1673-193x.2018.08.008]
 ZHANG Yongli,SHANG Wenlong,MA Yulin,et al.Experimental study onvariation laws of coal seam permeability under microwave[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2018,14(3):48.[doi:10.11731/j.issn.1673-193x.2018.08.008]

备注/Memo

备注/Memo:
国家科技重大专项项目(2011ZX05036);西南石油大学研究生创新基金项目(CX2014SY16)
更新日期/Last Update: 2016-04-15