|本期目录/Table of Contents|

[1]王永龙,王振锋,卢卫永,等.瓦斯抽采钻孔钻屑气固耦合运移压力损耗分析[J].中国安全生产科学技术,2015,11(4):13-18.[doi:10.11731/j.issn.1673-193X.2015.04.002]
 WANG Yong-long,WANG Zhen-feng,LU Wei-yong,et al.pressure loss of drilling cuttings movement caused by gas-solid coupling in gas extraction borehole[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2015,11(4):13-18.[doi:10.11731/j.issn.1673-193X.2015.04.002]
点击复制

瓦斯抽采钻孔钻屑气固耦合运移压力损耗分析
分享到:

《中国安全生产科学技术》[ISSN:1673-193X/CN:11-5335/TB]

卷:
11
期数:
2015年4期
页码:
13-18
栏目:
学术论著
出版日期:
2015-04-30

文章信息/Info

Title:
pressure loss of drilling cuttings movement caused by gas-solid coupling in gas extraction borehole
作者:
王永龙12王振锋1卢卫永1宋维宾1
(1. 河南理工大学 能源科学与工程学院, 河南 焦作 454000; 2.煤炭安全生产河南省协同创新中心,河南 焦作 454000)
Author(s):
WANG Yong-long12 WANG Zhen-feng1 LU Wei-yong1 SONG Wei-bin1
(1. School of Energy Science and Engineering, Henan Polytechnic University, Jiaozuo Henan 454000, China; 2. Collaborative Innovation Center of Coal Work Safety, Jiaozuo Henan 454000, China)
关键词:
瓦斯抽采钻孔气固两相流风压损耗钻孔收缩
Keywords:
gas extraction borehole gas-solid two-phase flow air pressure loss borehole shrinkage
分类号:
X936
DOI:
10.11731/j.issn.1673-193X.2015.04.002
文献标志码:
A
摘要:
基于气固两相流体力学理论,对瓦斯抽采钻孔内钻屑运移气固两相流压损、钻杆腔体接头处局部压损、钻孔收缩和“钻穴”引起的压损进行分析,结合工程案例,对钻进系统的风压损耗进行计算和分析。结果表明,钻进系统的风压损耗主要为气固两相流的摩擦压损,开放型钻穴对钻进系统的压损影响较小,填充型钻穴会带来较大的压力损耗。结合煤层地质条件和钻孔施工工艺参数,应用文中方法计算钻进系统风压损耗,为优化压风系统提供科学依据。
Abstract:
Based on gas-solid two-phase fluid dynamics theory, the drilling cuttings movement pressure loss caused by gas-solid flow in borehole, the partial pressure loss generated by air flow through the joint diameter reducing position, borehole shrinkage position and drilling cave area of the gas extraction borehole were analyzed. Combining with engineering case, the air pressure loss of drilling system was calculated and analyzed. The results showed that the friction pressure loss of gas-solid flow is the main components of air pressure loss in drilling system. Opened-type drilling cave has fewer impacts on air pressure loss of drilling system, but filled-type drilling cave can form great pressure loss. According to the geological conditions of coal seam and drilling design parameters, the method was applied to calculate the air pressure loss of drilling system. It can provide the scientific basis for optimizing the compressed air system.

参考文献/References:

[1]林柏泉,邹全乐,沈春明,等.双动力协同钻进高效卸压特性研究及应用[J].煤炭学报,2013, 38(6):911-917 LIN Bai-quan, ZOU Quan-le, SHEN Chun-ming, et al. Investigation on highly effective depressurization property of dual-power drilling and its application[J]. Journal of China Coal Society, 2013, 38(6): 911-917
[2]王永龙,宋维宾,孙玉宁,等.瓦斯抽采钻孔堵塞段力学模型及其应用[J].重庆大学学报,2014, 37(9):119-127 WANG Yong-long, SONG Wei-bin, SUN Yu-ning, et al. Clogging mechanical model and its application in gas extraction borehole[J]. Journal of Chongqing University, 2014, 37(9): 119-127
[3]王永龙,孙玉宁,翟新献,等.棱状钻杆应用于松软突出煤层钻进强度匹配研究[J].中国安全生产科学技术,2014, 10(10):48-54 WANG Yong-long, SUN Yu-ning, ZHAI Xin-xian, et al. Study on strength matching of prismatic drilling rod when drilling soft and outburst coal seam[J]. Journal of Safety Science and Technology, 2014, 10(10): 48-54
[4]宋维宾,孙玉宁,王永龙,等.松软突出煤层沿顶钻进提高钻进深度方法研究[J].煤炭科学技术,2014, 42(5):34-36,40 SONG Wei-bin, SUN Yu-ning, WANG Yong-long, et al. Study on method of enhancing drilling depth in soft outbursting coalbeds with roof drilling[J]. Coal Science and Technology, 2014, 42(5): 34-36,40
[5]王永龙,翟新献,孙玉宁.刻槽钻杆应用于突出煤层钻进的合理参数研究[J].煤炭学报,2011, 36(2):304-307 WANG Yong-long, ZHAI Xin-xian, SUN Yu-ning. Reasonable parameters study on grooved drill pipeused in drilling outburst coal seam[J]. Journal of China Coal Society, 2011, 36(2): 304-307
[6]王永龙,宋维宾,孙玉宁,等.瓦斯抽采钻孔堵塞段卡钻扭矩力学模型分析[J].中国安全科学学报,2014, 24(6):92-98 WANG Yong-long, SONG Wei-bin, SUN Yu-ning, et al. Analysis of pipe-sticking torque mechanical model for gas extraction borehole clogging segment[J]. China Safety Science Journal, 2014, 24(6): 92-98
[7]王永龙,翟新献,孙玉宁.松软突出煤层钻孔护壁力学作用机理分析[J].安徽理工大学学报(自然科学版),2012, 32(4):50-55 WANG Yong-long, ZHAI Xin-xian, SUN Yu-ning. Analysis of mechanism of borehole wall protection in soft coal seams with outburst threat[J]. Journal of Anhui University of Science and Technology( Natural Science), 2012, 32(4): 50-55
[8]冀前辉.松软煤层中风压空气钻进供风参数研究及除尘装置研制[D].北京:煤炭科学研究总院,2009.
[9]孙玉宁,王永龙,翟新献,等.松软突出煤层钻进困难的原因分析[J].煤炭学报,2012, 37(1):117-121 SUN Yu-ning, WANG Yong-long, ZHAI Xin-xian, et al. Analysis on reasons of drilling difficulty in soft and outburst coal seam[J]. Journal of China Coal Society, 2012, 37(1): 117-121
[10]韩颖,张飞燕.煤层钻孔失稳机理研究进展[J].中国安全生产科学技术,2014, 10(4):114-119 HAN Ying, ZHANG Fei-yan. Progress in research on instability mechanism of coalbed borehole[J]. Journal of Safety Science and Technology, 2014, 10(4):114-119
[11]杨伦,谢一华.气力输送工程[M].北京:机械工业出版社,2006:84-115.
[12]宋国良,周俊虎,刘建忠,等.浓相气力输送中变径管道优化设计方法的研究[J].浙江大学学报(工学版),2005, 39(11):1788-1792 SONG Guo-liang, ZHOU Jun-hu, LIU Jian-zhong, et al. Optimization design method of stepped pipeline in dense phase pneumatic conveying[J]. Journal of Zhejiang University ( Engineering Science), 2005, 39(11): 1788-1792
[13]王永龙,孙玉宁,翟新献,等.松软突出煤层新型钻进技术研究[J].采矿与安全工程学报,2012, 29(02):289-294 WANG Yong-long, SUN Yu-ning, ZHAI Xin-xian, et al. Study on new drilling technology in soft and outburst SEAM[J]. Journal of Mining & Safety Engineering, 2012, 29(02): 289-294
[14]王永龙,孙玉宁,翟新献,等.基于GSI原理瓦斯抽采钻孔收缩比评估方法及其应用[J].中国安全生产科学技术,2014, 10(11):22-28 WANG Yong-long, SUN Yu-ning, ZHAI Xin-xian, et al. The evaluation method and application of gas drainage borehole shrinkage ratio based on GSI principle[J]. Journal of Safety Science and Technology, 2014, 10(11): 22-28

相似文献/References:

[1]王晓珍.煤巷掘进过程中粉尘浓度影响因素分析[J].中国安全生产科学技术,2011,7(4):75.
 WANG Xiao-zhen.Anlysis of dust concentration influence factor in coal roadway driving[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2011,7(4):75.
[2]丁志伟,崔洪庆.基于瓦斯抽采钻孔的煤层隐伏小构造预测[J].中国安全生产科学技术,2015,11(1):40.[doi:10.11731/j.issn.1673-193x.2015.01.007]
 DING Zhi-wei,CUI Hong-qing.Prediction of concealed small structures in coal seam based on gas drainage drilling[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2015,11(4):40.[doi:10.11731/j.issn.1673-193x.2015.01.007]
[3]李长俊,季楚凌,陈磊,等.气固两相流下球阀磨损特性研究[J].中国安全生产科学技术,2015,11(3):5.[doi:10.11731/j.issn.1673-193x.2015.03.001]
 LI Chang-jun,JI Chu-ling,CHEN Lei,et al.Research on erosion characteristics of ball valve under gas-solid two-phase flow[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2015,11(4):5.[doi:10.11731/j.issn.1673-193x.2015.03.001]
[4]黄坤,邓平,李岳鹏,等.气固两相流90°弯管抗冲蚀结构优化[J].中国安全生产科学技术,2019,15(8):94.[doi:10.11731/j.issn.1673-193x.2019.08.015]
 HUANG Kun,DENG Ping,LI Yuepeng,et al.Structure optimization for erosion resistance of 90° elbow with gassolid twophase flow[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2019,15(4):94.[doi:10.11731/j.issn.1673-193x.2019.08.015]
[5]李博涛,张宏图,位乐,等.基于CFD-DEM的旋风除尘器内气固流动特性研究[J].中国安全生产科学技术,2019,15(11):151.[doi:10.11731/j.issn.1673-193x.2019.11.024]
 LI Botao,ZHANG Hongtu,WEI Le,et al.Study on gassolid flow characteristics of cyclone dust collector based on CFD-DEM[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2019,15(4):151.[doi:10.11731/j.issn.1673-193x.2019.11.024]
[6]陈景序,荆德吉,葛少成,等.皮带输煤暗道通风排尘改造方案优化研究[J].中国安全生产科学技术,2018,14(4):82.[doi:10.11731/j.issn.1673-193x.2018.04.013]
 CHEN Jingxu,JING Deji,GE Shaocheng,et al.Research on optimization of alteration scheme for ventilation and dust exhaust in coal belt conveyer tunnel[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2018,14(4):82.[doi:10.11731/j.issn.1673-193x.2018.04.013]

备注/Memo

备注/Memo:
国家“十二五”科技支撑计划项目(2013BAA03B02);河南省高等学校重点科研项目(15A440002); 河南理工大学博士基金资助项目(B2014-053)
更新日期/Last Update: 2015-04-30