[1]李麟,汪俊文,余纬.数控机床电气安全检测技术探讨[J].中国安全生产科学技术,2015,11(2):166-169.[doi:10.11731/j.issn.1673-193x.2015.02.027]
LI Lin,WANG Jun-wen,YU Wei.Discussion on testing technology for electrical safety of NC machine[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2015,11(2):166-169.[doi:10.11731/j.issn.1673-193x.2015.02.027]
点击复制
数控机床电气安全检测技术探讨
LI Lin,WANG Jun-wen,YU Wei.Discussion on testing technology for electrical safety of NC machine[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2015,11(2):166-169.[doi:10.11731/j.issn.1673-193x.2015.02.027]
《中国安全生产科学技术》[ISSN:1673-193X/CN:11-5335/TB]
- 卷:
- 11
- 期数:
- 2015年2期
- 页码:
- 166-169
- 栏目:
- 职业安全卫生管理与技术
- 出版日期:
- 2015-02-28
文章信息/Info
- Title:
- Discussion on testing technology for electrical safety of NC machine
- 分类号:
- X924.3
- 文献标志码:
- A
- 摘要:
- 依据电气安全通用标准GB 5226.1-2008，并结合数控机床电气结构特点，总结分析出了适合于数控机床的电气安全检测内容和方法。对电气系统检查内容划分了等级，提出了检查的方法和部位；同时也对电气三项试验方法特别是对试验中电路的设置进行了分析，提出了检测的难点、重点和测量不确定度的评定方法。结果表明，该方案的执行能够完整评价数控机床的电气安全性能，有利于促进电气安全标准的执行，可为今后机床电气安全设计、检测提供参考。
- Abstract:
- According to the general standard on electrical safety GB 5226.1-2008 , and combining with the characteristics of electrical structure in NC machine, the testing contents and methods about the electrical safety of NC machine were summarized and analyzed. The checking contents of electrical system was graded, and the checking methods and positions were put forward. At the same time, the three electrical testing methods , especially the setting of circuit in the test were analyzed, and the difficult points, key points in detection and the evaluation method of measuring uncertainty were put forward. The results showed that the scheme can completely evaluate the electrical safety performance of NC machine, and be beneficial to promote the execution of electrical safety standards, and it provides a reference for design, testing of machine electrical safety in the future.
参考文献/References:
［1］GB 5226.1-2008 机械电气安全机械电气设备第1部分:通用技术条件［S］.2009
［2］GB 15760-2004 金属切削机床 安全防护通用技术条件［S］.2005
［3］赵钦志.机械电气设备安全标准使用手册［M］. 北京: 中国标准出版社,2004
［4］蔺丽莉,黄祖广.GB 5226.1-2008 新版国家强制性标准综述［J］.制造技术与机床, 2012,(2):45-50
LIN Li-li，HUANG Zu-guang. Review the new edition of the GB 5226.1-2008 national mandatory standard ［J］. Manufacturing Technology & Machine Tool, 2012,(2):45-50
［5］GB/T 26679-2011 机床电气、电子和可编程电子控制系统保护联结电路连续性试验规范［S］. 2011
［6］GB/T 26675-2011 机床电气、电子和可编程电子控制系统绝缘电阻试验规范［S］. 2011
［7］GB/T 26676-2011 机床电气、电子和可编程电子控制系统耐压试验规范［S］. 2011
［8］JJF1059-1999 测量不确定度评定与表示［S］.1999
［9］钱绍圣.测量不确定度实验数据的处理与表示［M］.北京: 清华大学出版社, 2002: 35-112
［10］刘玮蔚.数字式绝缘电阻表测量不确定度的分析与评定［J］.河南电力，2012，(3)：5-6
LIU Wei-wei. Digital insulation resistance meter measurement uncertainty analysis and evaluation［J］. Electric Power of HeNan,2012，(3)：5-6
相似文献/References:
[1]钮英建,杨玲.北京地区村镇建筑防火现状调查与分析[J].中国安全生产科学技术,2011,7(10):138.
NIU Ying-jian,YANG Ling.Investigation and analysis on current situation of fire protection?in rural areas of Beijing[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2011,7(2):138.
[2]刘松海.基于人因失误分析的医院电气安全管理研究[J].中国安全生产科学技术,2013,9(5):185.[doi:10.11731/j.issn.1673-193x.2013.05.036]
LIU Song hai.Research of electrical safety management in hospital based on human error analysis[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2013,9(2):185.[doi:10.11731/j.issn.1673-193x.2013.05.036]
[3]高彦,宋立冬,杜一锋,等.基于PLM的矿用低压变频器漏电机理的研究[J].中国安全生产科学技术,2016,12(10):130.[doi:10.11731/j.issn.1673-193x.2016.10.022]
GAO Yan,SONG Lidong,DU Yifeng,et al.Research on electric leakage mechanism of low voltagefrequency converter for mining based on PLM[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2016,12(2):130.[doi:10.11731/j.issn.1673-193x.2016.10.022]
[4]崔铁军,郭大龙.基于改进YOLOX的变电站工人防护设备检测研究*[J].中国安全生产科学技术,2023,19(4):201.[doi:10.11731/j.issn.1673-193x.2023.04.029]
CUI Tiejun,GUO Dalong.Research on detection of protection equipment for substation workers based on improved YOLOX[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2023,19(2):201.[doi:10.11731/j.issn.1673-193x.2023.04.029]
备注/Memo
- 备注/Memo:
- 国家科技重大专项课题项目（2011ZX04001-081）
