|本期目录/Table of Contents|

[1]毛君,孟辉,刘佳鑫,等.雷管壳体安全检测过程的模拟与检测时间的确定[J].中国安全生产科学技术,2015,11(2):125-130.[doi:10.11731/j.issn.1673-193x.2015.02.021]
　MAO Jun,MENG Hui,LIU Jia-xin,et al.Simulation on safety inspection process of detonator shell and determination of inspection time[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2015,11(2):125-130.[doi:10.11731/j.issn.1673-193x.2015.02.021]
点击复制

雷管壳体安全检测过程的模拟与检测时间的确定
分享到：

《中国安全生产科学技术》[ISSN:1673-193X/CN:11-5335/TB]

卷:
11
期数:
2015年2期
页码:
125-130
栏目:
职业安全卫生管理与技术
出版日期:
2015-02-28

文章信息/Info

Title:
Simulation on safety inspection process of detonator shell and determination of inspection time
作者:
毛君1; 孟辉2; 刘佳鑫1; 陈洪月1
(1.辽宁工程技术大学 机械工程学院，辽宁 阜新123000; 2. 中航工业沈阳黎明航空发动机集团有限公司, 辽宁 沈阳110016)
Author(s):
MAO Jun1;  MENG Hui2;  LIU Jia-xin1;  CHEN Hong-yue1
(1.College of Mechanical Engineering, Liaoning Technical University, Fuxin Liaoning 123000, China; 2. AVIC Shenyang Liming Aero-Engine (Group) Corporation LTD, Shenyang Liaoning 110016, China)
关键词:
雷管; 气压检测; Flent
Keywords:
detonator;  air pressure inspection;  Fluent
分类号:
X924.3
DOI:
10.11731/j.issn.1673-193x.2015.02.021
文献标志码:
A
摘要:
采用数值模拟与现场试验相结合的方法，分析了带缺陷雷管在气压检测过程中气体的泄漏过程，确定了最佳的检测时间。采用Fluent建立了缺陷雷管正气压检测模型，分析了缺陷在不同位置处的气体泄漏过程，研究了气体泄漏过程中，雷管内部气压的分布及其随时间变化过程，结果表明：距雷管顶端的缺陷因尺寸较大，所以该泄漏点的压强要大于侧壁处，而气体泄漏流速小于侧壁处，综合分析缺陷处和雷管内部的气体压降过程及试验，可确定4s为最佳的充气时间，5s作为最佳的雷管质量诊断时间。
Abstract:
By applying the combining method of numerical simulation and field test, the leaking process of gas during air pressure inspection of the detonator with defects was analyzed, and the best inspection time was determined. The positive air pressure inspection model of the detonator with defects was established by using Fluent. The gas leaking process of defects in different locations were analyzed. The distribution of air pressure in the detonator and its variation process with time during the gas leaking process were studied. It showed that: the defect at the top of detonator had larger dimension, so the pressure in this leaking point was larger than that at side wall, but the flow velocity of gas leakage was smaller. Through comprehensive analysis on the gas pressure drop process and test at the defects and in the detonator, the best inflation time was 4s, and the best quality diagnosis time of detonator was 5s.

参考文献/References:

［1］李文江,闫孝姮,宋巍.金属雷管管壳暗伤自动检测机［J］.煤矿安全, 2007, 38 (7): 43-44 LI Wen-jiang, YAN Xiao-heng,SONG Wei. Automatic detection machine of metal detonator shell pipe［J］. Coal Mine Safety, 2007, 38 (7): 43-44
［2］李文江,闫孝姮,陈伟华，等. 传感器校正方法在雷管暗伤自动检测系统中的应用［J］. 煤炭学报,2008,33(2):221-225 LI Wen-jiang, YAN Xiao-heng, CHEN Wei-hua, et al. Application of the calibration method in detonator flaws automatic detection system［J］. Journal of China Coal Society,2008,33(2):221-225
［3］彭光正,纪春华,葛楠.气密性检测技术现状及发展趋势［J］. 机床与液压,2008,36(11)：172-174 PENG Guang-zheng, JI Chun-hua, GE Nan. Current status and future development of air tightness detection technique［J］. Machine Tool & Hydraulics,2008,36(11)：172-174
［4］肖祥正.环境温度对压降法漏率测试的影响［J］.真空与低温,2002, 8(3): 154-156 XIAO Xiang-zheng. The effect on total leakage measurement using the pressure decrease method because of environmental Temperature［J］. Vacuum & Cryogenics,2002, 8(3): 154-156
［5］龚从容.基于差压原理的微泄漏检测技术的研究与实践［D］.武汉: 华中理工大学, 1998
［6］Kawashima K, Kato T, Sawamoto K, et al. Realization of virtual sub chamber on active controlled pneumatic isolation table with pressure differentiator［J］. Precision Engineering, 2007, 31(2): 139~145
［7］李光海,刘时风.压力容器无损检测－漏磁检测技术［J］.无损检测,2004(12):638-642 LI Guang-hai, LIU Sh-i feng. Nondestructive testing of pressure vessels: magnetic flux leakage testing technique［J］. NDT, 2004(12):638-642
［8］杨燕勤.安志强，经树栋.喷射器流场的数值模拟研究 ［J］.西南民族大学学报自然科版，2006，32(2)：316~323 YANG Yan-qin，AN Zhi-qiang，JING Shu-dong. Study on numerical simulation of ejector flow field［J］. Journal of Southwest University for Nationalities?Natural Science Edition, 2006，32(2)：316-323
［9］范伟, 余麟, 李桦,等.通用型变速器壳体气密性泄漏检测装置［J］.机床与液压, 2007,35(3): 145-148 FAN Wei, YU Lin, LI Hua, et al. Universal air leak test equipment of the shell of gear-box［J］. Machine Tooll & Hydraulics, 2007,35(3): 145-148
［10］喻新发, 闫荣鑫, 孟冬辉,等.差压检漏系统仿真试验研究［J］. 航天器环境工程, 2006,23(5) :297-301 YU Xin-fa, YAN Rong-xin, MENG Dong-hui. Simulation experiment of differential pressure leak detection system［J］. Spacecraft Environment Engineering, 2006,23(5) :297-301
［11］周思林, 伍先达, 孙芝雨.基于模糊推理的高压气密性检测仪的设计［J］.仪表技术与传感器, 2006, (1): 21-22 ZHOU Si-lin, WU Xian-da, SUN Zhi-yu. Esign of air-leakage detector under high-pressure based on fuzzy reasoning［J］. Instrument Technique and Sensor, 2006, (1): 21-22
［12］关伟竑, 宋宝玉, 曲建俊.泄漏检测方法及试漏机设计中的几个问题［J］.机械工程师,2003, 3: 29-31 GUANG Wei-hong,SONG Bao-yu,QU Jian-jun. Fine leak test methods and some problems about the design of fine leak test machine［J］. Mechanical Engineer, 2003, 3: 29-31
［13］李锋, 万莅新, 邢武,等.高精度中压型智能测漏仪的研制［J］.汽车工艺与材料, 2002,(3): 26-28 LI Feng,WAN Li-xin,XING Wu,et al. Development of high-precision medium-pressure leak detector［J］. Autobobile Technology & Material, 2002,(3): 26-28
［14］马昌惠.生产过程中泄漏检测技术及其应用［J］.组合机床与自动化加工技术, 1998, (2):35-39 MA Chang-hui. Leak inspection and measuring technique in production pocess and its application［J］. Combination Machine Tools and Automatic Processing Technology, 1998, (2):35-39

相似文献/References:

备注/Memo

备注/Memo:
-
更新日期/Last Update: 2015-02-28