|本期目录/Table of Contents|

[1]鹿存荣,杨胜强.长距离掘巷局部通风计算风筒中风量风压的一种新方法[J].中国安全生产科学技术,2011,7(8):115-120.
　LU Cun-rong,YANG Sheng-qiang.A new method of calculating air flow and air pressure in aauxiliary ventilation in distant advancing roadway[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2011,7(8):115-120.
点击复制

长距离掘巷局部通风计算风筒中风量风压的一种新方法()
分享到：

《中国安全生产科学技术》[ISSN:1673-193X/CN:11-5335/TB]

卷:
7
期数:
2011年8期
页码:
115-120
栏目:
职业安全卫生管理与技术
出版日期:
2011-08-30

文章信息/Info

Title:
A new method of calculating air flow and air pressure in aauxiliary ventilation in distant advancing roadway
文章编号:
1673-193X(2011)-08-0115-06
作者:
鹿存荣； 杨胜强；
中国矿业大学安全工程学院煤炭资源与安全开采国家重点实验室；
Author(s):
LU Cun-rong; YANG Sheng-qiang
China University of Mining and Technology,School of Safety Engineering State Key Laboratory of Coal Resources and Mine Safety,Xuzhou 221008,China
关键词:
长距离局部通风;  通风阻力;  漏风量
Keywords:
distant auxiliary ventilation;  ventilation resistance;  air leakage quantity
分类号:
X936；TD72
DOI:
-
文献标志码:
A
摘要:
长距离掘进巷道通风时风筒进风口和出风口会有大的风量差和风压差。为了选择合理的风机通风,需要研究风筒中风量、风压的变化规律。常规方法是利用经验或实验得到风筒接头平均漏风量,从而计算进风口的风量和风压。但对于长距离通风且每段风筒较小时该方法所计算的参数偏小,会对风机选型造成误差。本文另辟蹊径,根据风量、风压平衡定律,按照非连续性通风网络模型推导出了进风口的风量、风压与出风口处的关系,并给出了简化的近似关系,作为风筒通风参数计算的新方法。结合具体实例,发现参数近似值与精确值高度相似,说明可以利用近似关系进行计算,简单方便;同时比较了按新方法和常规方法计算的风筒进风风量和通风阻力的差异,结果表明长距离掘进巷道的风量风压按新方法计算更为科学。 更多还原
Abstract:
There are large air flow and ventilation resistance differences between inlet and outlet of the whole tubing in a long advancing roadway.It has to be studied how air flow and ventilation resistance change in the tubing in order to choose better ventilation in advancing roadway.In order to solve this problem,the general method is to get average air leakage quantity between two tubes first from experiment or experience.But it will cause some mistakes in choosing auxiliary fan if the advancing roadway is far long and every tube is short.So another method needs to be taken.According to air flow and air pressure equations,the relations of the air flow and ventilation resistance in the beginning and those in the end of the tubing are established by the model of discontinuous air network and the similar equations are provided.A concrete example is taken which proves that the similar equations are highly close to the exact equations and could be conveniently and simply used.Meanwhile,the normal and the new method of calculating air flow and ventilation resistance are compared.The result indicates that the new way is better than the normal way in calculating air flow and ventilation resistance in tubing in distant advancing roadway.

参考文献/References:

[1]王德明．矿井通风与安全[M]．徐州：中国矿业大学出版社，2009[2] 孔庆君．局扇长距离供风技术在掘进工作面中的应用[J]，淮南职业技术学院学报，2008.2[2] Kong Q J．Application of Wind Feed Technology Using the Long-distance High –power Fan in the Heading Face[J]，Journal of Huainan Vocational & Technical College，2008.2[3]刘后金译．风筒漏风及局部系统的设计[J]．译自《The Mining Engineer》，1983．vo1.143[3]Translated by Liu H J．The Design of air leakage and Auxiliary System of Tubing [J]．Translated from《The Mining Engineer》，1983．vo1.143[4] 金恒斌．对胶皮风筒的风阻、漏风率和风量计算的探讨[J]．煤矿安全，1980.5[4] Jin H B．The Study on Resistance , Air Leakage Rate and Air Quantity of Rubber Tubing[J]．Safety in Coal Mines，1980.5[5] 陈启付．矿山巷道沿程连续分布漏风若干问题的探讨[J]，工业安全与环保，1989.2[5] Chen Q F．Discussion on Several Questions of Continuous Air leakage along Mining Roadway [J]，Industrial Safety and Dust Control，1989.2[6] 毕玉忠．掘进通风柔性风筒接头连接方法简介[J]，江苏煤炭，1995.1[6] Bi Y Z．Introduction of Connecting methods of Flexible Tubing in Digging Course[J]，Jiangsu Coal，1995.1[7] 陆愈实，张国屏．柔性风筒接口性能的综合评价[J]，探矿工程，1992.4[7] Lu Y S，Zhang G P．Comprehensive Evaluation on the Properties of the Joint for Flexible Ventilator Pipe[J]，Exploration Engineering，1992.4[8] 卢道民，高有存．独头掘进长距离通风技术的应用[J]，煤炭科技，2009.3[8] Lu D M，Gao Y C．Application of Ventilation Technology in Single long Advancing Roadway [J]，Coal Technology，2009.3[9] 焦健．长巷掘进的通风技术与安全管理[J]，煤，2005.1[9] Jiao J．Ventilation Technology and Safety Management in long Advancing Roadway [J]，Coal，2005.1[10] 郭凡进．对《规程》中放顶煤开采和掘进工作面局部通风有关条款执行问题的探讨[J]，煤矿安全，2005.4[10] Guo F J．Discussion on Execution of Rules about Auxiliary Ventilation of Top -Caving Coal Mining and Digging Face [J]，Safety in Coal Mines，2005.4[11] 张军．大直径风筒在掘进工作面的应用[J]，煤炭技术，2007.7[11] Zhang J．Application of Big Diameter Blowing Tube at Digging Face[J]，Coal Technology，2007.7

相似文献/References:

备注/Memo

备注/Memo:
收稿日期;2011-03-02

更新日期/Last Update: