|本期目录/Table of Contents|

[1]张飞凡,管锋,刘先明,等.自动抢接止回阀装置液压系统设计及仿真分析[J].中国安全生产科学技术,2019,15(4):71-76.[doi:10.11731/j.issn.1673-193x.2019.04.011]
　ZHANG Feifan,GUAN Feng,LIU Xianming,et al.Hydraulic system design and simulation analysis of automatic snap check valve device[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2019,15(4):71-76.[doi:10.11731/j.issn.1673-193x.2019.04.011]
点击复制

自动抢接止回阀装置液压系统设计及仿真分析
分享到：

《中国安全生产科学技术》[ISSN:1673-193X/CN:11-5335/TB]

卷:
15
期数:
2019年4期
页码:
71-76
栏目:
职业安全卫生管理与技术
出版日期:
2019-04-30

文章信息/Info

Title:
Hydraulic system design and simulation analysis of automatic snap check valve device
文章编号:
1673-193X(2019)-03-0071-06
作者:
张飞凡1; 管锋1; 刘先明2; 胡书闯1; 黄鹏1
（1. 长江大学 机械工程学院，湖北 荆州 434023； 2.中国石油川庆钻探工程有限公司 钻采工程技术研究院，四川 广汉 618300）
Author(s):
ZHANG Feifan1;  GUAN Feng1;  LIU Xianming2;  HU Shuchuang1;  HUANG Peng1
（1. School of Mechanical Engineering, Yangtze University, Jingzhou Hubei 434023, China; 2. Research Institute of Drilling and Production Engineering Technology, CNPC Chuanqing Drilling Engineering Company Limited, Guanghan Sichuan 618300, China）
关键词:
井口自动化; 止回阀; 液压系统; 仿真
Keywords:
wellhead automation; snap check valve;  hydraulic system;  simulation
分类号:
X937; TE931
DOI:
10.11731/j.issn.1673-193x.2019.04.011
文献标志码:
A
摘要:
利用井口自动化装置进行石油钻井过程中溢流、井喷时的关井作业是目前井控作业的热点。为了有效减少工作人员操作时间，保证装置的可靠性。提出了1种自动抢接止回阀装置，并将装置的控制系统设计成全液压系统。基于AMEsim对设计的液压系统进行建模以及模拟仿真分析，得到了执行元件（3个液压马达和1个伸缩液压缸）的输出特性曲线，然后与理论计算、设计及选型的执行元件的参数进行对比。研究结果表明：设计的液压回路可以确保自动抢接止回阀装置的整个工作过程正常、稳定的进行。设计的自动抢接止回阀装置的性能基本满足使用要求，具有一定的实用价值。
Abstract:
It is a hotspot of well control operation to shut down the wellhead when overflow and blowout occur in the process of oil drilling by using wellhead automation device. In order to effectively reduce the operating time of staff and ensure the reliability of the device, an automatic snap check valve device is proposed in this study, and the control system of the device is designed as a full hydraulic system. The hydraulic system is modeled and simulated based on AMESIM. The output characteristic curves of the actuator(three hydraulic motors and one telescopic hydraulic cylinder) are obtained, and then the parameters of the actuator are compared with those of the theoretical calculation, design and selection. The results show that the designed hydraulic circuit can ensure the normal and stable operation of the automatic snap check valve device. Through the trial application of the designed automatic snap check valve device, its performance can meet the application requirements, and has a certain practical value.

参考文献/References:

［1］姚登川,叶佳杰,崔巍,等. 基于事故树分析钻井井喷事故危险评价研究［J］.钻采工艺,2015,38(05):12-14,6. YAO Dengchuan, YE Jiajie, CUI Wei, et al. Study on risk assessment of well blowout accident based on accident tree analysis［J］.Drilling & Production Technology,2015,38(05):12-14,6
［2］吉安民,何沙. 基于系统动力学的井喷事故仿真研究［J］.中国安全科学学报,2011,21(10):37-42. JI Anmin, HE Sha. Study on simulation of blowout accidents based on system dynamics［J］.China Safety Science Journal,2011,21(10):37-42.
［3］黄悦华,李洪波,王正磊,等. 伸缩臂式铁钻工旋扣钳的设计研究［J］.石油机械,2014,42(7):28-31. HUANG Yuehua, LI Hongbo, WANG Zhenglei, et al. Design of telescopic iron roughneck spinner［J］.China Petroleum Machinery,2014,42(07):28-31.
［4］魏磊. 铁钻工钳牙关键参数优化设计［D］.西安:西安石油大学,2014.
［5］高胜庞伶伶,常玉连,等. 修井井口机械自动化技术现状分析与展望［J］.石油机械,2012,40(2):80-85. GAO Sheng, PANG Lingling, CHANG Yulian, et al. Analysis and prospect of the present situation of workover wellhead mechanical automation technology［J］.China Petroleum Machinery,2012,40(2):80-85.
［6］汪凯,张晓东,李一岚,等. 基于箭型止回阀案例的模糊可靠性评价方法［J］.机械设计与研究,2015,31(6):127-130. WANG Kai, ZHANG Xiaodong, LI Yilan, et al. Research on fuzzy reliability approach in view of arrow-type check valves［J］.Machine Design & Research,2015,31(6):127-130.
［7］张晓东,闫家,汪凯,等. 钻柱内防喷止回阀结构及失效原因分析［J］.石油矿场机械,2013,42(3):74-77. ZHANG Xiaodong, YAN Jia, WANG Kai, et al. Structures and failure reason analysis for check valve used as ibop in drill column［J］.Oil Field Equipment,2013,42(3):74-77.
［8］陈晓彬. 欠平衡钻井取心技术在四川的应用［J］.钻采工艺,2010,33(5):118-119. CHEN Xiaobin. Application of underbalanced drilling coring technology in Sichuan province［J］.Drilling & Production Technology,2010,33(5):118-119.
［9］于贵文,臧克江,林晶. 双作用多级液压缸的设计［J］.中国工程机械学报,2007,5(4):430-433. YU Guiwen, ZANG KeJiang, LIN Jing. Design of double-actuation telescopic hydraulic cylinder［J］.Chinese Journal of Construction Machinery,2007,5(4):430-433.
［10］马卫国,梅雪松,王炜,等. 基于AMESim的带压作业防喷器关闭性能仿真［J］.中国安全生产科学技术,2018,14(10):88-94. MA Weiguo, MEI Xuesong, WANG Wei, et al. Simulation on closing performance of blowout preventer in snubbing service based on AMESim［J］.Journal of Safety Science and Technology,2018,14(10):88-94.
［11］何涛,王传礼,邓海顺,等. 基于AMESim的水压单体液压支柱建模与仿真［J］.中国安全生产科学技术,2014,10(10):41-47. HE Tao, WANG Chuanli, Deng Haishun, et al. Modeling and simulation of water hydraulic single hydraulic prop based on AMESim［J］.Journal of Safety Science and Technology, 2014,10(10):41-47.
［12］LIN T, WANG Q, HU B, et al. Research on the energy regeneration systems for hybrid hydraulic excavators［J］.Automation in Construction,2010,19(8):1016-1026.
［13］LIN T, HUANG W, RENH, et al. New compound energy regeneration system and control strategy for hybrid hydraulic excavators［J］.Automation in Construction,2016,(68):11-20.
［14］杨阳,邹佳航,杨洋,等. 混合动力汽车再生制动压力协调控制系统［J］.机械工程学报:2014,50(22):127-135. YANG Yang, ZOU Jiahang, YANG Yang, et al. Pressure coordinated control system for HEV regenerative braking［J］.Journal of Mechanical Engineering,2014,50(22):127-135.
［15］赵斌,权龙,黄家海,等. 大型液压铲上车回转驱动系统及特性研究［J］.机械工程学报,2017,53(6):176-186. ZHAO Bin, QUAN Long, HUANG Jiahai, et al. Driven system and characteristics research of large hydraulic shovel swing motion［J］.Journal of Mechanical Engineering,2017,53(6):176-186.

相似文献/References:

备注/Memo

备注/Memo:
收稿日期： 2019-01-04
基金项目： 国家科技重大专项项目（2017ZX05070-005）; 湖北省技术创新重大专项项目（2016ACA181）; 长江大学长江青年科技创新团队基金项目（2016cqt01）
作者简介： 张飞凡，硕士研究生，主要研究方向为石油钻采机械设计和安全评价。
通信作者： 管锋，博士，教授，主要研究方向为石油机械设计及分析。
更新日期/Last Update: 2019-05-09