|本期目录/Table of Contents|

[1]姚景,王文武.弯管中油水固三相转相对冲刷腐蚀影响研究[J].中国安全生产科学技术,2018,14(6):142-148.[doi:10.11731/j.issn.1673-193x.2018.06.022]
　YAO Jing,WANG Wenwu.Study on influence of oil-water-solid three-phase inversion on erosion corrosion in elbow[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2018,14(6):142-148.[doi:10.11731/j.issn.1673-193x.2018.06.022]
点击复制

弯管中油水固三相转相对冲刷腐蚀影响研究
分享到：

《中国安全生产科学技术》[ISSN:1673-193X/CN:11-5335/TB]

卷:
14
期数:
2018年6期
页码:
142-148
栏目:
职业安全卫生管理与技术
出版日期:
2018-06-30

文章信息/Info

Title:
Study on influence of oil-water-solid three-phase inversion on erosion corrosion in elbow
文章编号:
1673-193X(2018)-06-0142-07
作者:
姚景; 王文武
（辽宁石油化工大学 石油与天然气工程学院，辽宁 抚顺 113001）
Author(s):
YAO Jing;  WANG Wenwu
(College of Oil and Natural Gas Engineering, Liaoning Shihua University, Fushun Liaoning 113001, China)
关键词:
集输管; 转相点; 颗粒数目; 腐蚀速率
Keywords:
gathering and transmission pipeline;  phase inversion point;  number of particles;  corrosion rate
分类号:
X937
DOI:
10.11731/j.issn.1673-193x.2018.06.022
文献标志码:
A
摘要:
为了研究三相流流经弯管产生转相时对管道的腐蚀问题，以辽河油田原油为例，在温度分别为40，50和55 ℃的实验条件下，测量不同温度下原油的粘度特性；分析了在不同温度和含水率情况下对高粘转相的影响；采用聚焦光束反射测量仪测量转相点附近固体颗粒沉降规律；采用RNGk－ε湍流模型和DPM模型相结合的方法，根据实验结果对其管道中的不同含水率以及不同混合速度变化对弯管的冲蚀影响进行了CFD模拟研究，得出在不同的入口速度和含水率变化条件下转相对于冲蚀速率的影响。研究结果表明：高粘原油的转相点与温度有关，温度越高，乳状液发生转相时的含水率越高；固体颗粒在油水固三相流沉降在转相点附近明显减少，变化规律与粘度成反向关系；当发生转相时，乳状液的粘度剧增导致管道中油品中包裹的颗粒数目增多，管道冲蚀速率明显减小。
Abstract:
In order to study the corrosion problem of pipeline caused by the phase inversion of threephase flow passing through the elbow, taking the crude oil from Liaohe oilfield as example, the viscosity characteristic of crude oil under different temperatures were measured with the experimental conditions of 40℃, 50℃, and 55℃. The influence of different temperatures and moisture contents on the highviscosity phase inversion was analyzed, and the sedimentation laws of solid particles near the phase inversion point were measured by using the focused beam reflectance measurement instrument. The CFD simulation study was carried out on the erosion influence of different moisture contents and mixing speed changes in the pipeline on the elbow by using the combined method of RNG turbulence model and DPM model according to the experimental results, and the influence of phase inversion on the erosion rate under different inlet speeds and moisture content changes was obtained. The results showed that the phase inversion point of highviscosity crude oil was related to the temperature, and the higher the temperature, the higher the moisture content when the phase inversion of emulsion occurred. The sedimentation of solid particles in the oilwatersolid threephase flow significantly reduced near the phase inversion point, and the change law was inversely related to the viscosity. When the phase inversion occurred, the viscosity of emulsion increased dramatically, which caused the number of particles wrapped in the oil in the pipeline increased, and the erosion rate of the pipeline significantly reduced.

参考文献/References:

［1］王玮，宫敬.油水两相管流反相模型研究［J］.石油学报，2008，29（1）：139-142, 148.WANG Wei, GONG Jing. Study on oil-water two-phase flow inversion model［J］. Acta Petrolei Sinica, 2008, 29(1):139-142,148.
［2］ZHANG Jian, XU Jingyu. Rheological behaviour of oil and water emulsions and their flow characterization in horizontal pipes［J］.Canadian Journal of Chemical Engineering, 2016, 94(2):324-331.
［3］孙杰, 敬加强, 周怡诺,等. 特稠油-水两相水平管流压降规律研究［J］. 中国科技论文, 2015(11):1282-1285.SUN Jie, JING Jiaqiang, ZHOU Yinuo, et al. Study on the law of pressure drop of horizontal heavy-water-water two-phase pipe flow［J］. Chinese Science & Technology Papers,2015(11):1282-1285.
［4］李传宪, 杨飞. 乳状液的转相特性研究［J］.化学进展, 2009,21(6):1124-1133.LI Chuanxian, YANG Fei. Research on the phase transition characteristics of emulsions［J］. Advances in Chemistry, 2009,21(6):1124-1133.
［5］李亮, 申龙涉, 范开峰,等. 弯管中多相流冲刷腐蚀数值模拟［J］. 辽宁石油化工大学学报, 2014, 34(3):48-52.LI Liang, SHEN Longshe, FAN Kaifeng, et al. Numerical simulation of multi-phase flow erosion erosion in curved pipe［J］.Journal of Liaoning University of Petrochemical Technology,2014,34(3):48-52.
［6］冉亚楠.不同结构弯管液固两相流冲蚀数值模拟［J］. 化工技术与开发,2017(2):55-58.RAN Yanan.Numerical simulation of liquid-solid two-phase flow erosion of elbow with different structures［J］.Chemical Technology & Development, 2017(2):55-58.
［7］POURARIA H, SEO J K, PAIK J K. A numerical study on water wetting associated with the internal corrosion of oil pipelines［J］. Ocean Engineering, 2016, 122:105-117.
［8］HU Z Y, DUAN D L, HOU S H, et al. Preliminary study on corrosion behaviour of carbon steel in oil-water two-phase fluids［J］. Journal of Materials Science & Technology,2015,31(12):1274-1281.
［9］LIN Nan, LAN Huiqing, XU Yugong, et al. Effect of the gas solid two-phase flow velocity on elbow erosion［J］. Journal of Natural Gas Science and Engineering, 2015, 26: 581-586.
［10］PLASENCIA J, PETTERSEN B, NYDAL O J. Pipe flow of water-in-crude oil emulsions: effective viscosity, inversion point and droplet size distribution［J］. Journal of Petroleum Science and Engineering, 2013, 101(12): 35-43.
［11］RODGGER W A, TRICE V G, RUSHTON J H. The effect of fluid motion on interfacial area of dispersion［J］. Chemical Engineering Progress, 1956, 52(12): 515-520.
［12］LI Xianghong，DENG Shuduan. Inhibition effect of dendrocalamus brandisii leaves extract on aluminum in HCl, H3PO4 solutions［J］. Corrosion Science, 2012, 65(12): 299-308.
［13］彭文山,曹学文. 管道参数对液/固两相流弯管流场及冲蚀影响分析［J］.中国腐蚀与防护学报, 2016, 36(1):87-96.PENG Wenshan, CAO Xuewen. Analysis of influence of pipeline parameters on flow field and erosion of liquid/solid two-phase flow elbow［J］. Journal of Chinese Society for Corrosion and protection, 2016, 36(1):87-96.
［14］刘刚,赵家良,卢兴国,等. 成品油携水携杂质及管内腐蚀监测系统的研发［J］.实验室研究与探索,2017, 36(7):59-63，102.LIU Gang, ZHAO Jialiang, LU Xingguo, et al. Research and development of monitoring system for carrying Impurities and corrosion in pipes of product oil［J］. Laboratory Research and Exploration, 2017, 36(7):59-63，102.
［15］唐绍猛，刘德俊，王光辉，等.油水两相流弯管处安全分析［J］.中国安全生产科学技术，2016，12（10）：96-101.TANG Shaomeng, LIU Dejun, WANG Guanghui，et al. Analysis of the Safety of Oil and Water Two-phase Flow Bend［J］. Journal of Safety Science and Technology, 2016, 12(10):96-101.
［16］MORSI S A, ALEXANDER A J. An investigation of particle trajectories in two-phase flow systems［J］. Journal of Fluid Mechanics,1972,55(2):193-208.
［17］胡跃华. 典型管件冲刷腐蚀的数值模拟［D］.杭州：浙江大学, 2012.

相似文献/References:

备注/Memo

备注/Memo:
-
更新日期/Last Update: 2018-07-05