|本期目录/Table of Contents|

[1]陈学华,吕鹏飞,宋卫华,等.基于Weibull分布的煤体强度计算研究[J].中国安全生产科学技术,2017,13(9):96-100.[doi:10.11731/j.issn.1673-193x.2017.09.015]
　CHEN Xuehua,LYU Pengfei,SONG Weihua,et al.Research on calculation of coal mass strength based on Weibull distribution[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2017,13(9):96-100.[doi:10.11731/j.issn.1673-193x.2017.09.015]
点击复制

基于Weibull分布的煤体强度计算研究
分享到：

《中国安全生产科学技术》[ISSN:1673-193X/CN:11-5335/TB]

卷:
13
期数:
2017年9期
页码:
96-100
栏目:
现代职业安全卫生管理与技术
出版日期:
2017-09-30

文章信息/Info

Title:
Research on calculation of coal mass strength based on Weibull distribution
文章编号:
1673-193X(2017)-09-0096-05
作者:
陈学华; 吕鹏飞; 宋卫华; 周年韬
(辽宁工程技术大学 矿业学院，辽宁 阜新 123000)
Author(s):
CHEN Xuehua;  LYU Pengfei;  SONG Weihua;  ZHOU Niantao
(College of Mining, Liaoning Technical University, Fuxin Liaoning 123000, China)
关键词:
煤体强度; 尺寸效应; Weibull分布; 原煤强度; 均质度
Keywords:
coal mass strength;  size effect;  Weibull distribution;  raw coal strength;  homogeneity
分类号:
TU45
DOI:
10.11731/j.issn.1673-193x.2017.09.015
文献标志码:
A
摘要:
以往矿山压力计算中多数使用煤体试件测试强度代替煤体强度进行计算，计算结果往往具有较大误差，针对此类问题，采用理论分析、实验室实验、数值模拟，数据拟合等手段研究了矿山工程中煤体强度的计算方法。结果表明：煤的强度具有一定的尺寸效应，测试试件边长越大，其强度越低；根据其尺寸特征，应用RFPA软件中的Weibull函数功能，模拟求解并拟合得出煤体强度与均质度和原煤强度之间的关系。定义了煤样标准强度为边长或直径为50 mm的煤试件强度，拟合得出煤样标准强度与原煤强度和煤体强度关系的表达式，可据此理论计算矿山工程中的煤体强度。
Abstract:
In the past, the test strength of coal mass specimen has majorly been used instead of the strength of coal mass in the calculation of mine pressure, and the calculation results often have large errors. In view of this kind of problem, a calculation method on the strength of coal mass in mining engineering was studied by using the methods of theoretical analysis, laboratory experiment, numerical simulation, and data fitting etc. The results showed that the strength of coal has a certain size effect, and the larger the length of test specimen, the lower the strength. According to the size characteristics, the relationship between the strength and homogeneity of coal mass and the raw coal strength was obtained through the simulated solving and fitting by using the Weibull function in RFPA software. The standard strength of coal sample was defined as the strength of coal specimen with the side length or diameter as 5 cm, and the relationship expression between the standard strength and raw coal strength of coal sample and the strength of coal mass was obtained through fitting, so the strength of coal mass in mine engineering can be calculated according to this theory.

参考文献/References:

［1］宋建波,张倬元,于远忠,等. 岩体经验强度准侧及其在地质工程中的应用［M］. 北京：地质出版社,2002. ［2］祁连光,杨科,陆伟,等. 煤系地层岩石单轴抗压强度统计分析［J］. 煤炭科学技术,2013,41(2):100-103. QI Lianguang, YANG Ke, LU Wei, et al. Statistical analysis on uniaxial compressive strength of coal measures［J］. Coal Science and Technology,2013,41(2):100-103. ［3］石永奎,马源鸿,尹延春. 尺寸效应对煤层冲击倾向性测试结果的影响［J］. 煤炭科学技术,2014,42(2):23-26. SHI Yongkui, MA Yuanhong, YIN Yanchun. Research on size effect affected to seam bump-prone test results ［J］. Coal Science and Technology,2014,42(2):23-26. ［4］林琼,毕忠伟,梁政. 基于尺度效应的灰岩强度研究［J］. 中国安全生产科学技术,2007,3(1):26-30. LIN Qiong, BI Zhongwei, LIANG Zheng. The study of size effect on the limestone strength［J］. Journal of Safety Science and Technology,2007,3(1):26-30. ［5］傅雪海,秦勇,姜波,等. 多相介质煤岩体力学实验研究［J］. 高校地质学报,2002,8(4):446-452. FU Xuehai, QIN Yong, JIANG Bo, et al. Study on mechanics experiments of multiphase medium coal rocks［J ］. Geological Journal of China Universities, 2002,8(4):446-452. ［6］张鹏,柴肇云. 干湿循环致砂岩单轴抗压强度弱化规律试验研究［J］. 煤炭科学技术,2016,44(S1):28-30+42. ZHANG Peng, CHAI Zhaoyun. Study on deterioration rules of uniaxial compressive strength of sandstone during wetting-drying cycles［J］. Coal Science and Technology,2016,44(S1):28-30+42. ［7］朱传奇,谢广祥,王磊,等. 含水率及孔隙率对松软煤体强度特征影响的试验研究［J］. 采矿与安全工程学 报,2017,34(3):601-607. ZHU Chuanqi, XIE Guangxiang, WANG Lei, et al. Experimental study on the influence of moisture content and porosity on soft coal strength characteristics［J］. Journal of Mining & Safety Engineering,2017,34(3):601-607. ［8］高霞,刘文新,高橙,等. 含瓦斯水合物煤体强度特性三轴试验研究［J］. 煤炭学报,2015,40(12):2829-2835. GAO Xia, LIU Wenxin, GAO Cheng, et al. Triaxial shear strength of methane hydrate-bearing coal［J］. Journal of China Coal Socety,2015,40(12):2829-2835. ［9］李凤颖. 煤岩力学性质的离散元数值模拟及应用探讨［D］. 成都：成都理工大学,2012. ［10］彭瑞,赵光明,孟祥瑞. 岩体强度参数新解及应用［J］. 中国安全生产科学技术,2014,10(5):43-48. PENG Rui, ZHAO Guangming, MENG Xiangrui. Latest explanation of rock mass strength parameters and its application［J］. Journal of Safety Science and Technology,2014,10(5):43-48. ［11］朱丽媛,李忠华,徐连满. 钻屑扭矩法测定煤体应力与煤体强度研究［J］. 岩土工程学报,2014,36(11):2096- 2102. ZHU Liyuan, LI Zhonghua, XU Lianman. Measuring stress and strength of coal by drilling cutting torque method［J］. Chinese Journal of Geotechnical Engineering,2014,36(11):2096-2102. ［12］李忠华,朱丽媛,李国臻,等. 钻杆扭矩法测定煤岩强度的理论与试验研究［J］. 中国矿业大学学报,2015,44 (4):612-616. LI Zhonghua, ZHU Liyuan, LI Guozhen, et al. Experimental and theoretical study of determination of coal rock strength using the drill rod torque method［J］. Journal of China University of Mining Technology,2015,44(4):612-616. ［13］朱丽媛,李忠华,徐连满. 钻进速度对钻杆扭矩影响的理论分析与试验研究［J］. 实验力学,2015,30(3):395- 400. ZHU Liyuan, LI Zhonghua, XU Lianman. Theoretical analysis and experimental study of the influence of drilling rate on torque of drill rod［J］. Journal of Experimental Mechanics,2015,30(3):395-400. ［14］Bieniawski Z T. The effect of specimens size on compressive strength of coal［J］. International Journal of Rock Mechanics and Mining Sciences,1968(5):235-335. ［15］刘宝琛,张家生,杜奇中,等.岩石抗压强度的尺寸效应［J］. 岩石力学与工程学报,1998,17(6):611-614. LIU Baochen, ZHANG Jiasheng, DU Qizhong, et al. A study of size effect for compression strength of rock ［J］. Chinese Journal of Rock Mechanics and Engineering, 1998,17(6):611-614.

相似文献/References:

备注/Memo

备注/Memo:
国家自然科学基金项目(51304110)
更新日期/Last Update: 2017-10-12