|本期目录/Table of Contents|

[1]龚银春,艾志久,付必伟,等.井斜角与摩擦对连续油管正弦屈曲的影响研究[J].中国安全生产科学技术,2016,12(10):50-55.[doi:10.11731/j.issn.1673-193x.2016.10.008]
　GONG Yinchun,AI Zhijiu,FU Biwei,et al.Study on influence of inclination angle and friction on sinusoidal buckling of coiled tubing[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2016,12(10):50-55.[doi:10.11731/j.issn.1673-193x.2016.10.008]
点击复制

井斜角与摩擦对连续油管正弦屈曲的影响研究
分享到：

《中国安全生产科学技术》[ISSN:1673-193X/CN:11-5335/TB]

卷:
12
期数:
2016年10期
页码:
50-55
栏目:
学术论著
出版日期:
2016-10-30

文章信息/Info

Title:
Study on influence of inclination angle and friction on sinusoidal buckling of coiled tubing
作者:
龚银春; 艾志久; 付必伟; 汤海平
（西南石油大学 机电工程学院, 四川 成都 610500）
Author(s):
GONG Yinchun;  AI Zhijiu;  FU Biwei;  TANG Haiping
School of Mechanical Engineering, Southwest Petroleum University, Chengdu Sichuan 610500, China
关键词:
摩擦; 井斜角; 连续油管; 正弦屈曲
Keywords:
friction;  inclination angle;  coiled tubing;  sinusoidal buckling
分类号:
X937
DOI:
10.11731/j.issn.1673-193x.2016.10.008
文献标志码:
A
摘要:
为了避免连续油管井下屈曲行为的产生，进而导致井下作业事故，开展了井下管柱正弦屈曲行为的研究。根据最 小势能原理建立了一个复杂的井下管柱正弦屈曲模型。在考虑摩擦的情况下，构建了斜井中的管柱屈曲微分方程组。通 过对屈曲微分方程组进行无量纲化处理，使方程组能独立于井下泥浆、井眼尺寸和管柱形式而存在。最后，采用虚功原 理研究了摩擦与井斜角对正弦屈曲临界载荷的影响。研究结果显示，正弦屈曲临界载荷将随着摩擦系数的增加而增加。 此外，随着井斜角的增加，正弦屈曲临界载荷也将不断增加。该研究结果可为连续油管预防井下作业事故的发生提供理 论性指导。
Abstract:
In order to avoid the downhole buckling of coiled tubing, which may lead to downhole operation accident, the study on sinusoidal buckling of downhole string was carried out. A complicated sinusoidal buckling model of downhole string was established based on the principle of minimum potential energy. The differential equations of string buckling in inclined shaft were constructed considering the friction and treated with dimensionless method to enable the equations existing with independence of downhole mud, wellbore size and string type. Finally, the principle of virtual work was applied to study the influence of friction and inclination angle on critical load of sinusoidal buckling. The results showed that the critical load of sinusoidal buckling increases with the increase of friction coefficient. In addition, with the increase of inclination angle, the critical load of sinusoidal buckling also presents an upward trend. It can provide theoretical guidance to the prevention of downhole operation accidents for coiled tubing.

参考文献/References:

［1］杜钢,于洋飞,熊朝东，等.钻井井喷失控因素分析及预防对策［J］.中国安全生产科学技术, 2014,10(2):120- 125. DU Gang, YU Yangfei，XIONG区Chaodong,et al. Analysis on factors and preventive action for drilling uncontrollable blowout［J］. Journal of Safety Science and Technology, 2014,10(2):120-125.
［2］张兴全,李相方,李玉军，等.钻井井喷爆炸事故分析及对策［J］.中国安全生产科学技术, 2012, 8(6):129-133. ZHANG xinquan, LI xiangfang, LI yujun,et al. Study on explosion-proof technology of drilling blowout［J ］. Journal of Safety Science and Technology, 2012, 8(6):129-133.
［3］Falser, S., Bridge, C., & Palmer, A. C. (2010). Interaction between a compliant guide and a coiled tubing during sub-sea well intervention in deep water［J］. Applied Ocean Research, 32(4), 454-459.
［4］Lubinski, A., Althouse, W.S., 1962. Helical buckling of tubing sealed in packers. J. Petrol. Technol. 14, 655-670.
［5］Paslay, P. R., & Bogy, D. B. (1964). The stability of a circular rod laterally constrained to be in contact with an inclined circular cylinder. Journal of Applied Mechanics, 31(4).
［6］Dawson, R., Paslay, P.R., 1984. Drill pipe buckling in inclined holes. J. Pet. Technol. 36,1734- 1738.
［7］Huang, N.C., Pattillo, P.D., 2000. Helical buckling of a tube in an inclined wellbore. Int. J. Non -Linear Mech. 35, 911-923.
［8］Mitchell, R.F., 1988. New concepts for helical buckling. Drilling Eng.3, 303-310.
［9］Mitchell, R. F., 1997. Effects of well deviation on helical buckling. Drilling Completion SPE 29462, 63-69.
［10］Mitchell, R. F., 2002. New buckling solutions for extend reach wells. IADC 74566, IADC Drilling Conference. Dallas, Texas, February 2002, 26-28 pp.
［11］Cheatham, J.B., Pattillo, P.D., 1984. Helical post buckling configuration of a weightless column under the action of an axial load. Soc. Petrol. Eng. J. AIME 36, 467-472.
［12］Mitchell, R.F., 1988. New concepts for helical buckling. SPE Drill. Eng. 3, 303-310.
［13］He, X., Kyllingstad, A., 1993. Helical Buckling and Lock-up Conditions for Coiled Tubing in Curved Wells. SPE 25370.
［14］Miska, S., Cunha, J.C., 1995. An analysis of helical buckling of tubulars subjected to axial and torsional loading in inclined wellbores. SPE 29460. In: Presented at the SPE Production Operations Symposium, Oklahoma City, OK, 2-4 April.
［15］Gao, D.L., Liu, F.W., Xu, B.Y., 2002. Buckling behavior of pipes in oil and gas wells. Prog. Nat. Sci. 12 (2), 126-130.
［16］Yuan, Z., Wang, X., 2012. Nonlinear buckling analysis of inclined circular cylinder-in-cylinder by the discrete singular convolution. Int. J. Nonlin. Mech. 47, 699-711.
［17］Mitchell, R.F., 2002. New buckling solutions for extend reach wells. IADC/SPE 74566, IADC/SPE Drilling Conference. Dallas, Texas, February 2002, 26-28pp.
［18］Liu, F., Wang, X., 2004. Nonlinear buckling analysis of tubing in deviated wells by the finite element method. Trans. N. U. A. A 21, 36-42.
［19］Hakimi, H., Moradi, S., 2010. Drill string vibration analysis using differential quadrature method. J. Pet. Sci. Eng. 70, 235-242.
［20］郑华林, 张益维, 刘少胡. 水力压裂冲蚀磨损对连续管剩余寿命影响研究［J］.中国安全生产科学技术, 2016, 12(7)：110-115. ZHENG Hualin; ZHANG Yiwei; LIU Shaohu. Study on effect of erosion wear to residual life of coiled tubing for hydraulic fracturing ［J］. Journal of Safety Science and Technology, 2016, 12(7)：110-115.
［21］李子丰.油气井杆管柱力学研究进展与争论［J］.石油学报, 2016, 37(4):531-556. LI Zifeng. Research advances and debates on tubular mechanics in oil and gas wells［J］. Acta Petrolei Sinica, 2016,37(4): 531-556.

相似文献/References:

备注/Memo

备注/Memo:
国家自然科学基金项目(51074132)
更新日期/Last Update: 2016-11-30