|本期目录/Table of Contents|

[1]戴兴国,陈增剑,黄毅.下向进路回采钢筋混凝土假顶稳定性分析[J].中国安全生产科学技术,2014,10(6):84-89.[doi:10.11731/j.issn.1673-193x.2014.06.013]
　DAI Xing guo,CHEN Zeng jian,HUANG Yi.Analysis on stability of reinforced concrete false roof in underhand drift mining[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2014,10(6):84-89.[doi:10.11731/j.issn.1673-193x.2014.06.013]
点击复制

下向进路回采钢筋混凝土假顶稳定性分析
分享到：

《中国安全生产科学技术》[ISSN:1673-193X/CN:11-5335/TB]

卷:
10
期数:
2014年6期
页码:
84-89
栏目:
职业安全卫生管理与技术
出版日期:
2014-06-30

文章信息/Info

Title:
Analysis on stability of reinforced concrete false roof in underhand drift mining
文章编号:
20140613
作者:
戴兴国; 陈增剑; 黄毅
（中南大学 资源与安全工程学院，湖南 长沙 410083）
Author(s):
DAI Xingguo;  CHEN Zengjian;  HUANG Yi
(School of Resources and Safety Engineering, Central South University, Changsha Hunan 410083, China)
关键词:
下向进路; 损伤塑性模型; 钢筋混凝土假顶; 抗拉强度
Keywords:
underhand drift;  damaged plasticity model;  reinforced concrete false roof;  tensile strength
分类号:
X936
DOI:
10.11731/j.issn.1673-193x.2014.06.013
文献标志码:
A
摘要:
〗为确保下向进路采场高效安全回采，采用ABAQUS的损伤塑性模型对下向进路钢筋混凝土假顶进行稳定性分析，得到假顶的应力与位移分布规律，分别从假顶的应力分布、变形量对不同进路尺寸及假顶厚度的影响进行比较分析。结果表明，进路假顶产生的最大拉应力（089MPa）小于混凝土层的抗拉强度（127MPa）；最大压应力（416 MPa）小于混凝土层的抗压强度（119MPa）；假顶底部最易被拉裂位置为偏离假顶中央(05~1)m处；钢筋承载了大部分拉应力，受拉性能得到充分利用。在进路尺寸为3m×3m或者4m×3m时假顶厚度取06m，进路尺寸为4m×4m时假顶厚度取08m，假顶最大拉应力值均未超过混凝土的抗拉强度值，此时假顶较为稳定，便于进路维护与提高回采强度。研究结果对下向进路采场的安全生产提供技术保障。
Abstract:
In order to guarantee the safety and mining efficiency of underhand drift stopes, the damaged plasticity model of ABAQUS was used to analyze the stability of reinforced concrete false roof in underhand drift, and the stress and displacement distribution of false roof were obtained from the simulation. The analysis and comparison were conducted on the stress distribution and the deformation of false roof to study the impact on different drift structure parameters and the thickness of false roof. The results showed that the maximum tensile stress (0.89 MPa) of the false roof is less than tensile strength (1.27 MPa) of concrete. The maximum pressure (4.16 MPa) of the false roof is also less than pressure strength (11.9 MPa) of concrete. The ruptureprone zone locates at 0.51 m away from the center of false roof .The reinforcement bears most of the tensile stress value, and its tensile property is fully used. The thickness of false roof should be 0.6 m when the drift structure parameters is 3 m×3 m or 4 m×3 m, and the thickness of false roof should be 0.8 m when the drift structure parameters is 4 m×4 m, their maximum tensile stresses are less than tensile strength of concrete. Therefore, the false roof is relatively stable, and the maintenance of drift becomes easy and the recovering strength is enhanced. The results offer technical support for safety production of underhand drift mining.

参考文献/References:

[1]韩斌, 吴爱祥, 邓建.基于可靠度理论的下向进路胶结充填技术分析［J］.中南大学学报:自然科学版, 2006, （3）: 31 HAN Bin, WU Aixiang, DENG Jian, et al. Backfill technical analysis based on reliability theory in the underhand drift cutandfilling stoping［J］. Journal of Central South University:Science and Technology, 2006, （3）: 31
[2］杨红伟, 赵彬, 蒲成志.下向进路人工假顶失稳机理研究［J］.现代矿业,2009，(12):13-15 YANG Hongwei, ZHAO Bin, PU Chenzhi. Research on instability mechanism of artificial roof of underhand drif［J］.Morden Mining,2009,(12):13-15
[3］江文武, 徐国元, 中国生.下向分层进路式胶结充填体顶板稳定性分析［J］.江西有色金属,2007,21(4):12-15 JIANG Wenwu,XU Guoyuan,ZHONG Guosheng. Analysis on stability of cemented fills ceiling of underhand delamination heading［J］.Jiangxi Nonferrous Metals,2007,21(4):12-15
[4］赵伏军, 李夕兵, 赵国彦.进路法回采顶柱人工假顶的稳定性分析［J］.金属矿山, 2002,(4):27-29 ZHAO Fujun,LI Xibin,ZHAO Guoyan. Stability analysis of the artificial roof in drift stoping of crown pillar［J］.Metal Mine,2002,(4):27-29
[5］黄玉诚, 孙恒虎.高水固结充填下向进路假顶参数设计方法［J］.有色金属, 2001,53(2):15-17 HUANG YuCheng,SUN Henghu. Determining method of the artificial roof in underhand drift of high water material backfill［J］. Nonferrous Metals,2001,53(2):15-17
[6］范文录, 李夕兵, 周子龙. 基于可靠度理论的钢筋混凝土假顶强度确定与配筋设计研究［J］. 矿冶工程,2013,33(4):30-35 FAN Wenlu,LI Xibing,ZHOU Zilong.Strength determinaton for reinforced concrete false roof and reinforcement design based on reliability theory［J］. Mining and Metallurgical Engineering,2013, 33(4):30-35
[7］韩斌, 张升学, 邓建.基于可靠度理论的下向进路充填体强度确定方法［J］.中国矿业大学学报,2006,35(3):372-376 HAN Bin,ZHANG Shengxue,DENG Jian. Determining method of backfill strength for underhand drift cutandfill stopping based on reliability theory ［J］. Journal of China University of Mining & Technology,2006,35(3):372-376
[8］王新民, 徐东升.下向进路采矿法充填体质量的综合评价［J］. 中国矿业,2006,15(11):62-65 WANG Xinmin,XU Dongsheng. Comprehensive evaluation of the filling body quality in downward drift stoping ［J］.China Mining Magazine,2006,15(11):62-65
[9］谢盛青, 王新民, 史良贵.人工假顶充填体稳定性数值分析［J］.金属矿山, 2009,(9):44-47 XIE Shengqing,WANG Xinmin,SHI Lianggui. Stability numerical analysis of artificial roof filling body［J］. Metal Mine, 2009,(9):44-47
[10］方秦, 还毅, 张亚栋.ABAQUS混凝土损伤塑性模型的静力性能分析［J］.解放军理工大学学报, 2007,8(3):254-260 FANG Qin,HUAN Yi,ZHANG Yadong.Investigation into static properties of damaged plasticity model for concrete in ABAQUS［J］. Journal of PLA University of Science and Technology, 2007,8(3):254-260
[11］沈新普, 王琛元, 周琳.一个钢筋混凝土损伤塑性本构模型及工程应用［J］. 工程力学,2007,24(9):122-128 SHEN Xinpu,WANG Shenyuan,ZHOU Lin. A damage plastic constitutive model for reinforced concrete and its engineering application ［J］.Engineering Mechanics,2007,24(9):122-128
[12］赵宝友,马震岳,梁冰,等.基于损伤塑性模型的地下洞室结构地震作用分析［J］.岩土力学,2009,30(5):1515-1521 ZHAO Baoyou, MA Zhenyue, LIANG Bing,et al.Seismic analysis of underground structures based on damaged plasticity model［J］.Rock and Soil Mechanics, 2009,30(5):1515-1521
[13］还毅,方秦,陈力,柳锦春.强震作用下地铁车站结构损伤破坏的三维非线性动力分析［J］.北京工业大学学报,2011,37(6):853-862 HUAN Yi, FANG Qin, CHEN Li, et al. 3D nonlinear damage analysis of metrostation structures under strong seismic loading ［J］.Journal of Beijing University of Technology,2011,37(6):853-862
[14］陈学华, 万长涛, 周建伟.大采深沿空掘巷煤柱尺寸的数值模拟［J］.科技导报,2012,30(34):51-53 CHEN Xuehua, WAN Changtao, ZHOU Jianwei.Numerical simulation for size of coal pillar of large mining depth along gobside entry driving direction ［J］. Science and Technology Review,2012,30(34):51-53

相似文献/References:

备注/Memo

备注/Memo:
-
更新日期/Last Update: 2014-07-28