|本期目录/Table of Contents|

[1]侯连浪,刘向君,梁利喜,等.软煤样断裂韧性加载速率效应实验研究*[J].中国安全生产科学技术,2021,17(3):46-51.[doi:10.11731/j.issn.1673-193x.2021.03.007]
　HOU Lianlang,LIU Xiangjun,LIANG Lixi,et al.Experimental study on loading rate effect for fracture toughness of soft coal sample[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2021,17(3):46-51.[doi:10.11731/j.issn.1673-193x.2021.03.007]
点击复制

软煤样断裂韧性加载速率效应实验研究*
分享到：

《中国安全生产科学技术》[ISSN:1673-193X/CN:11-5335/TB]

卷:
17
期数:
2021年3期
页码:
46-51
栏目:
学术论著
出版日期:
2021-03-31

文章信息/Info

Title:
Experimental study on loading rate effect for fracture toughness of soft coal sample
文章编号:
1673-193X(2021)-03-0046-06
作者:
侯连浪; 刘向君; 梁利喜; 张平; 谢斌; 张旭
（1.西南石油大学 油气藏地质及开发工程国家重点实验室，四川 成都 610500；
2.中联煤层气有限责任公司，北京 100015）
Author(s):
HOU Lianlang;  LIU Xiangjun;  LIANG Lixi;  ZHANG Ping;  XIE Bin;  ZHANG Xu
(1.State Key Laboratory of Oil and Reservoir Geology and Exploitation,Southwest Petroleum University,Chengdu Sichuan 610500,China;
2.China United Coalbed Methane Co.,Ltd.,Beijing 100015,China)
关键词:
软煤样; 加载速率; 割理角度; 断裂韧性
Keywords:
soft coal sample;  loading rate;  cleat angle;  fracture toughness
分类号:
X936
DOI:
10.11731/j.issn.1673-193x.2021.03.007
文献标志码:
A
摘要:
为探究加载速率对软煤样Ⅰ型断裂韧性的影响，对取自云南老厂的煤样开展压入硬度实验及不同加载速率条件下的断裂韧性实验，分析加载速率及割理角度对软煤样断裂特性的影响。结果表明：实验老厂煤岩压入硬度分布在51.84～125.03 MPa之间，按压入硬度划分属于软岩类别；实验岩样Ⅰ型断裂韧性分布在0.009 9～0.208 2 MPa·mm0.5之间，平均值为0.096 5 MPa·mm0.5；在0.2～1.1 mm/min的位移加载速率范围内，实验软煤岩Ⅰ型断裂韧性值随加载速率的增大呈现先增大后降低的规律，割理角度对软煤岩Ⅰ型断裂韧性有较大影响，Ⅰ型断裂韧性与割理角度的关系呈现为负线性相关性。低加载速率条件下，软煤岩表现为韧性断裂，高加载速率条件下，软煤岩表现为脆性断裂，加载速率的变化导致软煤岩断裂类型的变化。
Abstract:
In order to explore the influence of loading rate on the mode I fracture toughness of soft coal sample,the coal samples were collected from LC area in Yunnan,and the indentation hardness tests and fracture toughness tests under different loading rates were carried out.The influence of loading rate and cleat angle on the fracture characteristics of soft coal samples were analyzed.The results showed that the indentation hardness of tested coal rock in LC area was distributed from 51.84 MPa to 125.03 MPa,which belonged to the category of soft rock according to the classification of indentation hardness.The mode I fracture toughness of tests coal samples was distributed from 0.009 9 MPa·mm0.5 to 0.208 2 MPa·mm0.5,with an average value of 0.096 5 MPa·mm0.5.In the displacement loading rate range of 0.2 mm·min-1~1.1 mm·min-1,with the increase of loading rate,the mode I fracture toughness of tested soft coal rock increased firstly and then decreased.The cleat angle had a great influence on the mode I fracture toughness of tested soft coal rock,and the relationship between mode I fracture toughness and cleat angle presented a negative linear correlation.Under the condition of low loading rate,the fracture type of soft coal rock was ductile fracture,while under the condition of high loading rate,the fracture type of soft coal rock was brittle fracture,and the change of loading rate led to the change of the fracture type of soft coal rock.

参考文献/References:

［1］侯连浪，刘向君，梁利喜，等.滇东黔西松软煤岩三轴压缩力学特性及能量演化特征［J］.中国安全生产科学技术,2019,15(2):105-110. HOU Lianlang,LIU Xiangjun,Liang Lixi,et al.Triaxial compression mechanical properties and energy evolution characteristics of softcoal and rock in eastern Yunnan and western Guizhou［J］.Journal of Safety Science and Technology,2019,15(2):105-110.
［2］康卫勇，靳钟铭，魏锦平.中硬煤大煤样的压裂实验研究［J］.太原理工大学学报,2001,32(1):5-7. KANG Weiyong,JIN Zhongming,WEI Jinping.Experimental study ofcrack characteristic of big medium-hand coal samples ［J］.Journal of Taiyuan University of Technology,2001,32(1):5-7.
［3］张丹丹，冯雨实，李永臣，等.基于有限元软件的煤层气水平井井壁稳定数值模拟［J］.煤矿安全,2018,49(3):144-147. ZHANG Dandan,FENG Yushi,LI Yongchen,et al.Numerical simulation of wellbore stability for CBM horizontal well by finite element software ［J］.Safety in Coal Mines,2018,49(3):144-147.
［4］陈宇龙，魏作安，许江，等.单轴压缩条件下岩石声发射特性的实验研究［J］.煤炭学报,2011,36(S2):237-240. CHEN Yulong,WEI Zuoan,XU Jiang,et al.Experimental research on the acoustic emission characteristics of rock under uniaxial compression ［J］.Journal of China Coal Society,2011,36(S2):237-240.
［5］陈宇龙，张玉.加载速率对不同岩性岩石Kaiser效应影响［J］.煤炭学报,2018,43(4):959-966. CHEN Yulong,ZHANG Yu.Influence of loading rate on Kaiser effect for different lithology rocks ［J］.Journal of China Coal Society,2018,43(4):959-966.
［6］宫能平，罗裕繁，高远.加载速率对岩石动态断裂韧度影响的实验［J］.上海交通大学学报,2012,46(10):1570-1572. GONG Nengping,LUO Yufan,GAO Yuan.Experimentstudy on effect of loading rate for dynamic fracture toughness of rock ［J］.Journal of Shanghai Jiaotong University,2012,46(10):1570-1572.
［7］吴绵拔.加载速率对岩石抗压和抗拉强度的影响［J］.岩土工程学报,1982,41(2):97-106. WU Mianba.Effect of loading rate on compressive and tensile strength of rock ［J］.Chinese Journal of Geotechnical Engineering,1982,41(2):97-106.
［8］SANG H C,OGATA Y,KANEKO K.Strain-rate dependency of the dynamic tensile strength of rock ［J］.International Journal of Rock Mechanics & Mining Sciences,2003,40(5):763-777.
［9］李永盛.加载速率对红砂岩力学效应的实验研究［J］.同济大学学报(自然科学版),1995,23(3):265-269. LI Yongsheng.Experimental analysis on mechanical effect of loading rate on red sandstone ［J］.Journal of Tongji University,1995,23(3):265-269.
［10］纪文栋，杨春和，姚院峰，等.应变加载速率对盐岩力学性能的影响［J］.岩石力学与工程学报,2011,30(12):2507-2513. JI Wendong,YANG Chunhe,YAO Yuanfeng,et al.Effect of loading strainrate on mechanicalperformances of salt rock ［J］.Chinese Journal of Rock Mechanics and Engineering,2011,30(12):2507-2513.
［11］李海波,王建伟,李俊如,等.单轴压缩下软岩的动态力学特性实验研究［J］.岩土力学,2004,25(1):1-4. LI Haibo,WANG Jianwei,LI Junru,et all.Mechanical properties of soft rock under dynamic uniaxial compression ［J］.Rock and Soil Mechanics,2004,25(1):1-4.
［12］廖红建,蒲武川,殷建华.软岩的应变速率效应研究［J］.岩石力学与工程学报,2005,24(18):3218-3223. LIAO Hongjian,PU Wuchuan,YIN Jianhua.Study on strain rate effect of soft rock ［J］.Chinese Journal of Rock Mechanics and Engineering,2005,24(18):3218-3223.
［13］梁卫国，徐素国，莫江，等.盐岩力学特性应变率效应的实验研究［J］.岩石力学与工程学报,2010,29(1):43-50. LIANG Weiguo,XU Suguo,MO Jiang,et al.Test study of strain rate effect of mechanical performances of salt rock ［J］.Chinese Journal of Rock Mechanics and Engineering,2010,29(1):43-50.
［14］AYATOLLAHI M R.ISRM-suggested method for determining the mode I static fracture toughness using semi-circular bend specimen ［J］.Rock Mechanics & Rock Engineering,2014,47(1):267-274.
［15］GILLESPIE J W,CARLSSON L A,SMILEY A J.Rate-dependent mode I interlaminar crack growth mechanisms in graphite/epoxy and graphite/peek ［J］.Composites Science & Technology,1987,28(1):1-15.
［16］李玉龙，刘会芳.加载速率对层间断裂韧性的影响［J］.航空学报,2015,36(8):2620-2650. LI Yulong,LIU Huifang.Loading rate on interlaminar fracture toughness［J］.Acta Aeronautica ET Astroutica Sinica,2015,36(8):2620-2650.

相似文献/References:

[1]马海峰,李传明,李家卓,等.不同推进速度下煤岩体采动力学行为响应特征与控制[J].中国安全生产科学技术,2016,12(12):74.[doi:10.11731/j.issn.1673-193x.2016.12.013]
　MA Haifeng,LI Chuanming,LI Jiazhuo,et al.Response characteristics of mining-induced mechanical behavior for coal and rock mass under different advancing speed and its control[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2016,12(3):74.[doi:10.11731/j.issn.1673-193x.2016.12.013]
[2]陈少波,卢玉斌,袁海梁,等.基于ANSYS/LS-DYNA的液态CO2相变破岩裂纹扩展特征研究*[J].中国安全生产科学技术,2023,19(6):74.[doi:10.11731/j.issn.1673-193x.2023.06.011]
　CHEN Shaobo,LU Yubin,YUAN Hailiang,et al.Study on crack propagation characteristics of liquid CO2 phase transition rock breaking based on ANSYS/LS-DYNA[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2023,19(3):74.[doi:10.11731/j.issn.1673-193x.2023.06.011]
[3]杨青,荣传新,蔡海兵,等.楔刀不同加载速率条件下细砂岩裂纹扩展研究*[J].中国安全生产科学技术,2023,19(12):93.[doi:10.11731/j.issn.1673-193x.2023.12.012]
　YANG Qing,RONG Chuanxin,CAI Haibing,et al.Research on crack propagation in fine sandstone under different loading rates of wedge gear hob[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2023,19(3):93.[doi:10.11731/j.issn.1673-193x.2023.12.012]

备注/Memo

备注/Memo:
收稿日期： 2021-01-11
* 基金项目： 国家科技重大专项项目（201605044004-001）
作者简介： 侯连浪，博士研究生，主要研究方向为工程测井。
通信作者： 刘向君，博士，教授，主要研究方向为岩石物理及岩石力学、复杂地层井壁稳定。
更新日期/Last Update: 2021-04-13