[1]程远平, 付建华, 俞启香. 中国煤矿瓦斯抽采技术的发展[J]. 采矿与安全工程学报, 2009, 26(2): 127-139.
CHENG Yuanping, FU Jianhua, YU Qixiang. Development of gas extraction technology in coal mines of China[J]. Journal of Mining and Safety Engineering, 2009, 26(2):127-139.
[2]王振锋, 周英, 孙玉宁, 等. 新型瓦斯抽采钻孔注浆封孔方法及封堵机理[J]. 煤炭学报, 2015, 40(3): 588-595.
WANG Zhenfeng, ZHOU Ying, SUN Yuning, et al. Novel gas extraction borehole grouting sealing method and sealing mechanism[J]. Journal of China Coal Society, 2015, 40(3): 588-595.
[3]ZHANG Kai, SUN Kai, YU Bangyong, et al. Determination on sealing depth of in-seam boreholes for seam gas drainage based on drilling process of a drifter[J]. Engineering Geology, 2016, 210:115-123.
[4]周福宝, 李金海, 昃玺, 等. 煤层瓦斯抽放钻孔的二次封孔方法研究[J]. 中国矿业大学学报, 2009, 38(6): 764-768.
ZHOU Fubao, LI Jinhai, ZE Xi, et al. A study of the second hole sealing method to improve gas drainage in coal seams[J]. Journal of China University of Mining & Technology, 2009, 38(6): 764-768.
[5]孙玉宁, 卢卫永, 杨坤, 等. 三囊袋封堵器处置钻孔漏气技术研究[J]. 中国安全生产科学技术, 2015,11(3): 67-72.
SUN Yuning, LU Weiyong, YANG Kun, et al. Study on disposal technology of air leakage around borehole by three -pouch closure device[J]. Journal of Safety Science and Technology, 2015,11(3): 67-72.
[6]ZHAI C, XIANG X W, ZOU Q L, et al. Influence factors analysis of a flexible gel sealing material for coal-bed methane drainage boreholes[J]. Environmental Earth Sciences, 2016, 75(5): 1-13.
[7]封海鹏. 水泥基瓦斯抽采封孔注浆材料试验研究[D]. 焦作: 河南理工大学, 2017.
[8]王志明, 孙玉宁, 王永龙, 等.瓦斯抽采钻孔动态漏气圈特性及漏气处置研究[J]. 中国安全生产科学技术, 2016, 12(5): 139-145.
WANG Zhiming, SUN Yuning, WANG Yonglong, et al. Study on dynamic air-leakage ring characters and air-leakage disposal of gas extraction borehole[J]. Journal of Safety Science and Technology, 2016, 12(5): 139-145.
[9]GAO X L. Elasto-plastic analysis of an internally pressurized thick-walled cylinder using a strain gradient plasticity theory[J]. International Journal of Solids & Structures, 2003, 40(23):6445-6455.
[10]XU L, WU K, RLER C, et al. Influence of curing temperatures on the hydration of calcium aluminate cement/Portland cement/calcium sulfate blends[J]. Cement & Concrete Composites,2017, 80: 298-306.
[11]MOON D H, DERMATAS D, WAZNE M, et al. Swelling related to ettringite crystal formation in chromite ore processing residue[J]. Environmental Geochemistry and Health, 2007, 29(4):289-294.
[12]TAYLOR H, FAMY C, SCRIVENER K, Delayed ettringite formation[J]. Cement & Concrete Composites,2001, 31: 683-93.
[13]YAN P, ZHENG F, PENG J et al. Relationship between delayed ettringite formation and delayed expansion in massive shrinkage-compensating concrete[J]. Cement & Concrete Composites, 2004, 26(6):687-693.
[1]李英明,杨明东,付永刚.U型工作面上隅角埋管瓦斯抽采数值模拟研究[J].中国安全生产科学技术,2013,9(12):16.[doi:10.11731/j.issn.1673-193x.2013.12.002]
LI Ying-ming,YANG Ming-dong,FU Yong-gang.Numerical simulation on gas drainage with buried pipe in upper corner of U\|type working face[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2013,9(12):16.[doi:10.11731/j.issn.1673-193x.2013.12.002]
[2]姜二龙,刘健,蔡文鹏,等.深孔预裂爆破技术在低透气性回采工作面中的试验研究[J].中国安全生产科学技术,2013,9(7):20.[doi:10.11731/j.issn.1673-193x.2013.07.003]
JIANG Er long,LIU Jian,CAI Wen peng,et al.Experiment study on deep hole pre-splitting blasting technology in low permeability outburst working face[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2013,9(12):20.[doi:10.11731/j.issn.1673-193x.2013.07.003]
[3]蔡文鹏,刘健,孙东生,等.顶板走向高位钻孔瓦斯抽采技术的研究及应用[J].中国安全生产科学技术,2013,9(12):35.[doi:10.11731/j.issn.1673-193x.2013.12.005]
CAI Wen peng,LIU Jian,SUN Dong sheng,et al.Research and application of gas drainage technique with highlocated drilling method along roof strike[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2013,9(12):35.[doi:10.11731/j.issn.1673-193x.2013.12.005]
[4]孙东生,刘健,蔡文鹏,等.高瓦斯低透气性煤层水力压裂技术的试验研究[J].中国安全生产科学技术,2013,9(9):49.[doi:10.11731/j.issn.1673-193x.2013.09.009]
SUN Dong sheng,LIU Jian,CAI Wen peng,et al.Experimental study on hydraulic fracturing technology in high gas and low permeability coal seam[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2013,9(12):49.[doi:10.11731/j.issn.1673-193x.2013.09.009]
[5]孙晓梅,吕品,刘琛琛,等.基于CFD及正交试验的工作面流场参数优化[J].中国安全生产科学技术,2014,10(4):54.[doi:10.11731/j.issn.1673-193x.2014.04.009]
SUN Xiao mei,LV Pin,LIU Chen chen,et al.Optimization of flow field parameters in working face based on orthogonal experiment and CFD[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2014,10(12):54.[doi:10.11731/j.issn.1673-193x.2014.04.009]
[6]吴爱军,王巧莉.薛湖矿二2煤顺层钻孔瓦斯抽放的数值模拟与分析[J].中国安全生产科学技术,2014,10(6):90.[doi:10.11731/j.issn.1673-193x.2014.06.014]
WU Ai jun,WANG Qiao li.Numerical simulation and analysis on gas extraction with bedding drillings in the 22 coal seam of Xuehu Mine[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2014,10(12):90.[doi:10.11731/j.issn.1673-193x.2014.06.014]
[7]杨明,闫潮,刘亚军.斜交高位钻孔抽采空区瓦斯设计及优化研究[J].中国安全生产科学技术,2014,10(7):117.[doi:10.11731/j.issn.1673-193x.2014.07.021]
YANG Ming,YAN Chao,LIU Ya jun.Research and optimization of gas extraction in gob by skew high level boreholes[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2014,10(12):117.[doi:10.11731/j.issn.1673-193x.2014.07.021]
[8]戎立帆,柏发松,车志飞.下向穿层瓦斯抽采钻孔新型封孔方法及应用[J].中国安全生产科学技术,2014,10(8):64.[doi:10.11731/j.issn.1673-193x.2014.08.011]
RONG Li-fan,BAI Fa-song,et al.New hole sealing method and application for gas extraction by downward cross-layer drilling[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2014,10(12):64.[doi:10.11731/j.issn.1673-193x.2014.08.011]
[9]徐雪战,孟祥瑞,赵光明,等.基于三维可视化的卸压区瓦斯穿层抽采仿真研究[J].中国安全生产科学技术,2014,10(9):77.[doi:10.11731/j.issn.1673-193x.2014.09.013]
XU Xue-zhan,MENG Xiang-rui,ZHAO Guang-ming,et al.Virtual simulation of gas drainage drilling through layers in
stress-relaxation zone based on three-dimensional visualization[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2014,10(12):77.[doi:10.11731/j.issn.1673-193x.2014.09.013]
[10]王文,李化敏,高保彬,等.远距离保护层开采煤层渗透特性及瓦斯抽采技术研究[J].中国安全生产科学技术,2014,10(11):84.[doi:10.11731/j.issn.1673-193x.2014.11.014]
WANG Wen,LI Hua-min,GAO Bao-bin,et al.Study on permeability characteristic of coal seam and gas extractiontechniques in coal mining with long distance protection coal seam[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2014,10(12):84.[doi:10.11731/j.issn.1673-193x.2014.11.014]