|本期目录/Table of Contents|

[1]闪顺章,王从陆.焊接烟尘扩散数学模型研究[J].中国安全生产科学技术,2018,14(6):177-181.[doi:10.11731/j.issn.1673-193x.2018.06.028]
　SHAN Shunzhang,WANG Conglu.Study on numerical model for diffusion of welding fume[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2018,14(6):177-181.[doi:10.11731/j.issn.1673-193x.2018.06.028]
点击复制

焊接烟尘扩散数学模型研究
分享到：

《中国安全生产科学技术》[ISSN:1673-193X/CN:11-5335/TB]

卷:
14
期数:
2018年6期
页码:
177-181
栏目:
职业安全卫生管理与技术
出版日期:
2018-06-30

文章信息/Info

Title:
Study on numerical model for diffusion of welding fume
文章编号:
1673-193X(2018)-06-0177-05
作者:
闪顺章; 王从陆
（中南大学 资源与安全工程学院，湖南 长沙 410083）
Author(s):
SHAN Shunzhang;  WANG Conglu
(School of Resources and Safety Engineering, Central South University, Changsha Hunan 410083, China)
关键词:
焊接工艺安全; 焊接烟尘; 高斯烟羽模型; 扩散系数
Keywords:
welding process safety;  welding fume;  Gaussian plume model;  diffusion coefficient
分类号:
X964
DOI:
10.11731/j.issn.1673-193x.2018.06.028
文献标志码:
A
摘要:
为了更好地掌握焊接烟尘的扩散规律，减少造成的职业危害，将肖诗祥的数学模型和简化后的高斯模型应用于焊接烟尘的扩散研究。通过实验研究，优化焊接烟尘扩散系数等关键参数，并给出经验公式；采用数学模型计算的方法，获得不同数学模型下的焊接烟尘浓度空间分布特征，并用实验数据与之进行对比和误差分析，确定较优的焊接烟尘扩散数学模型，为进一步研究焊接烟尘空间浓度特征和烟尘危害控制奠定基础。
Abstract:
To better master the diffusion laws of welding fume and reduce the caused occupational hazard, the mathematical model of Xiao Shixiang and the simplified Gaussian model were applied in the study on the diffusion of welding fume. The key parameters such as the diffusion coefficient of welding fume were optimized through the experimental study, and the corresponding empirical formula was given. The spatial distribution characteristics of the concentration of welding fume under different mathematical models were obtained by using the method of mathematical model calculation, and the comparison and error analysis were carried out between the calculation results and the experimental data to determine the better mathematical model for the diffusion of welding fume. It laid a foundation for the further study on the characteristics of spatial concentration of welding fume and the control of fume hazard.

参考文献/References:

［1］王汉青, 李铖骏, 谢东,等. 受限空间焊接烟尘通风净化研究进展［J］. 湖南工业大学学报, 2017, 31(2):1-8.WANG Hanqing,LI Chengjun,XIE Dong，et al.A Research Review of Welding Fume Ventilation Purification in Confined Spaces［J］. Journal of Hunan University of Technology,2017,31(2):1-8.
［2］许芙蓉, 杨立军. 气体保护焊烟尘发尘量的测量与成分分析［J］. 工业仪表与自动化装置, 2015(3):16-18，53.XU Furong ,YANG Lijun.An approach on gas welding fume forming rate and fume ingredient［J］. Industrial Instrumentation and Automation,2015(3):16-18，53.
［3］FEDAN J S,THOMPSON J A,MEIGHAN T G, et al. Altered ion transport in normal human bronchial epithelial cells following exposure to chemically distinct metal welding fume particles［J］. Toxicology & Applied Pharmacology, 2017, 326（7）:1-6.
［4］肖诗祥, 施雨湘, 杨世柏. 焊接烟尘的扩散特性［J］. 武汉理工大学学报(交通科学与工程版), 1997(4):386-390.XIAO Shixiang, SHI Yuxiang, YANG Shibo.Diffusion Characteristics of Welding fume［J］.ournal of Wuhan Transportation University,1997(4): 386-390.
［5］王娇娇, 于诗琪, 许诗辰. 基于高斯烟羽扩散模型的空气污染研究［J］. 科技与创新, 2017(10):21-24.WANG Jiaojiao,YU Shiqi,XU Shichen.Study on Air Pollution Based on Gaussian Smoke Diffusion Model［J］.Technology and Innovation,2017(10):21-24.
［6］魏雪芹, 张璇, 赵会军,等. 基于高斯模型的天然气泄漏事故模拟研究［J］. 油气田地面工程, 2017, 36(7):6-9.WEI Xueqin,ZHANG Xuan,ZHAO Huijun,et al.Simulation Study on Natural Gas Leakage Accidents Based on Gaussian Model［J］.Oil-Gasfield Surface Engineering ,2017,36(7):6-9.
［7］刘志云, 贾艳艳, 张玉洁. 焊接烟尘浓度分布规律实验研究［J］. 科学技术与工程, 2014, 14(17):178-181.LIU Zhiyun,JIA Yanyan,ZHANG Yujie.Experimental Study of the Welding Fumes Distribution［J］.Science Technology and Engineering,2014,14(17):178-181.
［8］李雪. 液化天然气泄漏扩散过程数值模拟［D］. 大连：大连理工大学, 2015.
［9］马小铎. 影响PM2.5的理化因素及相关问题的模型研究［D］. 北京：北京交通大学, 2015.
［10］孙志宽. 高斯烟羽扩散模型再研究［J］. 环境与可持续发展, 2013, 38(5):107-109.SUN Zhikuan.A Further Study on the Diffusion Model of Gaussian Smoke［J］.Environment and Sustainable Development,2013,38(5):107-109.
［11］李云云. 高斯烟羽模型的改进及在危化品泄漏事故模拟中的应用［D］. 广州：广州大学, 2013.
［12］张超. 管输天然气泄露模型定量分析应用［J］. 当代化工研究, 2016(6):25-26.ZHANG Chao.Quantitative Analysis of Natural Gas Leakage Model［J］.Contemporary chemicalre search,2016(6):25-26.
［13］LI Y Y, SHANG X Q, LIU R F. GIS-Based Emergency Management System for Chemical Industry Park［J］. Advanced Materials Research, 2012, 550-553:2941-2944.
［14］李玉平. 计算大气扩散系数的一组经验公式［J］. 北京理工大学学报, 2009, 29(10):914-917.LI Yuping.A set of empirical formulas for calculating the atmospheric diffusion coefficient［J］.Journal of Beijing Institute of Technology,2009,29(10):914-917.
［15］MARTIN D. Comment On “The Change of Concentration Standard Deviations with Distance”［J］. Air Repair, 1976, 26(2):145-147.
［16］牛萍萍. 通风控制条件下电焊车间室内污染物扩散规律研究［D］.西安：西安建筑科技大学, 2013.

相似文献/References:

[1]杨斌,陈建武,王佩,等.碳钢和铝合金焊接烟尘环境危害特性对比研究*[J].中国安全生产科学技术,2023,19(8):137.[doi:10.11731/j.issn.1673-193x.2023.08.020]
　YANG Bin,CHEN Jianwu,WANG Pei,et al.Comparative study on environment hazard characteristics of welding fume of carbon steel and aluminum alloy[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2023,19(6):137.[doi:10.11731/j.issn.1673-193x.2023.08.020]

备注/Memo

备注/Memo:
国家重点研发计划重点专项专题（2017YFC080520405）；国家自然科学基金（5167040518）
更新日期/Last Update: 2018-07-05