[1]张智,敬耘博,杨昆.复杂工况下湿式火驱注入井温度场及腐蚀规律研究*[J].中国安全生产科学技术,2024,20(10):132-138.[doi:10.11731/j.issn.1673-193x.2024.10.018]
ZHANG Zhi,JING Yunbo,YANG Kun.Study on temperature field and corrosion regularity of wet in-situ combustion injection well under complex working conditions[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2024,20(10):132-138.[doi:10.11731/j.issn.1673-193x.2024.10.018]
点击复制
复杂工况下湿式火驱注入井温度场及腐蚀规律研究*
ZHANG Zhi,JING Yunbo,YANG Kun.Study on temperature field and corrosion regularity of wet in-situ combustion injection well under complex working conditions[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2024,20(10):132-138.[doi:10.11731/j.issn.1673-193x.2024.10.018]
《中国安全生产科学技术》[ISSN:1673-193X/CN:11-5335/TB]
- 卷:
- 20
- 期数:
- 2024年10期
- 页码:
- 132-138
- 栏目:
- 职业安全卫生管理与技术
- 出版日期:
- 2024-10-30
文章信息/Info
- Title:
- Study on temperature field and corrosion regularity of wet in-situ combustion injection well under complex working conditions
- 文章编号:
- 1673-193X(2024)-10-0132-07
- Keywords:
- in-situ combustion injection well; wet forward combustion; temperature field; oxygen corrosion; corrosion regularity
- 分类号:
- X937
- 文献标志码:
- A
- 摘要:
- 针对湿式火驱注入井井筒温度场变化大、不同阶段腐蚀速率难以确定这一问题，以典型湿式火驱注入井进行研究，建立井筒温度场，计算各个阶段的井筒温度，通过氧腐蚀预测模型对管柱进行敏感性分析得到注气、注水下的油管腐蚀速率。研究结果表明：井筒温度主要受注入蒸汽温度、日注气量、日注水量和油层燃烧影响，注入蒸汽温度达到350 ℃时，井底温度高达266.1 ℃；管柱腐蚀速率随注水量增大快速上升，日注水量达30 m3时，井底附近的腐蚀速率高达1.23 mm/a。研究结果可为湿式火驱注入井腐蚀规律分析提供一定参考并为安全生产提供保障。
- Abstract:
- Aiming at the problems of large temperature field change in the wellbore of wet in-situ combustion injection wells,and the difficulty in determining the corrosion rate at different stages,the typical wet in-situ combustion injection wells were studied.The temperature field of wellbore was established,and the wellbore temperature at each stage were calculated.The sensitivity analysis of tubing was conducted through the prediction model of oxygen corrosion,and the corrosion rates of tubing under gas injection and water injection were obtained.The results show that the wellbore temperature is mainly affected by the injection steam temperature,daily gas injection volume,daily water injection volume,and oil layer combustion.When the injection steam temperature reaches 350 ℃,the bottomhole temperature reached as high as 266.1 ℃.The corrosion rate of tubular string increases rapidly with the increase of water injection volume.When the daily water injection volume reaches 30 m3,the corrosion rate near the bottomhole reaches as high as 1.23 mm/a.The research results can provide some reference for the analysis on corrosion regularity of wet in-situ combustion injection wells and provide guarantee for work safety.
参考文献/References:
［1］孙焕泉,刘慧卿,王海涛，等.中国稠油热采开发技术与发展方向［J］.石油学报,2022,43(11):1664-1674.
SUN Huanquan,LIU Huiqing,WANG Haitao,et al.Development technology and direction of thermal recovery of heavy oil in China ［J］.Acta Petrolei Sinica,2022,43(11):1664-1674.
［2］中华人民共和国国家发展和改革委员会.数据概览:2021年能源相关数据［EB/OL］.（2022-01-29）［2024-01-29］.https://www.ndrc.gov.cn/fggz/fgzy/jjsjgl/202201/t20220129_1314011.html?code=&state=123.
［3］蒋琪,游红娟,潘竟军，等.稠油开采技术现状与发展方向初步探讨［J］.特种油气藏,2020,27(6):30-39.
JIANG Qi,YOU Hongjuan,PAN Jingjun,et al.Preliminary discussion on current status and development direction of heavy oil recovery technologies ［J］.Special Oil & Gas Reservoirs,2020,27(6):30-39.
［4］孙江河,范洪富,张付生，等.提高稠油采收率技术概述［J］.油田化学,2019,36(2):366-371.
［5］张智,杨昆,刘和兴，等.注水井井筒完整性设计方法［J］.石油钻采工艺,2020,42(1):76-85.
ZHANG Zhi,YANG Kun,LIU Hexing,et al.a Design method for the well integrity of water injector well ［J］.Oil Drilling & Production Technology,2020,42(1):76-85.
［6］SHOKOYA O S,MEHTA S A,MOORE R G,et al.Evaluation of the miscibility and contribution of flue gas to oil recovery under high pressure air injection［J］.Journal of Canadian Petroleum Technology,2002,41(10):58-68.
［7］张智,王汉.油套管导热系数与温度耦合模型计算井筒温度场［J］.中国科技论文,2015,10(21):2539-2544.
ZHANG Zhi,WANG Han.A coupled calculation of wellbore temperature incorporating temperature andthermal conductivity of tubing and casing［J］.China Sciencepaper,2015,10(21):2539-2544.
［8］段泽辉,张智,张超,等.高温高压气井完井管柱设计方法［J］.重庆科技学院学报(自然科学版),2017,19(1):67-70,74.
DUAN Zehui,ZHANG Zhi,ZHANG Chao,et al.Design of completion string in high temperature and high pressure gas well［J］.Journal of Chongqing University of Science and Technology （Natural Sciences Edition),2017,19(1),67-70,74.
［9］马国锐,许红林,张智,等.注水井管柱完整性评价及注水参数优化研究［J］.西南石油大学学报(自然科学版),2022,44(1):143-150.
MA Guorui,XU Honglin,ZHANG Zhi,et al.Pipe string Integrity evaluation and water Injection parameter optimization for Injection wells［J］.Journal of Southwest Petroleum University（Science & Technology Edition）,2022,44(1):143-150.
［10］袁士宝,孙健,宫宇宁,等.多层稠油油藏对向火驱开采方法研究［J］.非常规油气,2023,10(2):26-32.
YUAN Shibao,SUN Jian,GONG Yuning,et al.Study on mining method of opposite fire flooding in multi-layer heavy oil reservoir［J］.Unconventional Oil & Gas,2023,10(2):26-32.
［11］SUN F,YAO Y,LI X,et al.A numerical approach for obtaining type curves of superheated multi-component thermal fluid flow in concentric dual-tubing wells［J］.International Journal of Heat and Mass Transfer,2017,111:41-53.
［12］刘满军.曙光油田火驱油套管腐蚀现状及对策［J］.化工管理,2017,(18):219.
［13］于晓涛,刘志龙,吴婷,等.海上热采井井筒管柱腐蚀研究及应用［J］.复杂油气藏,2021,14(4):112-115,120.
YU Xiaotao,LIU Zhilong,WU Ting,et al.Research and application of wellbore string corrosion in offshore thermal production wells［J］.Complex Hydrocarbon Reservoirs,2021,14(4):112-115,120.
［14］郭玉洁,杨志文,孙海礁,等.某注水注气井C110油管腐蚀穿孔原因分析［J］.腐蚀与防护,2020,41(4):65-68.
GUO Yujie,YANG Zhiwen,SUN Haijiao,et al.Cause analysis of corrosion and perforation of C110 tubing in a water/gas injection well［J］.Corrosion & Protection,2020,41(4):65-68.
［15］SONG F M.A comprehensive model for predicting CO2 corrosion rate in oil and gas production and transportation systems［J］.Electrochimica Acta,2010,55(3): 689-700.
［16］赵鹏,于杰,郭金宝.钻杆溶解氧腐蚀影响因素分析［J］.钢管,2010 (2):29-33.
ZHAO Peng,YU Jie,GUO Jinbao,et al.Analysis of influencing factors of dissolved oxygen corrosion of drill pipe［J］.Steel Pipe,2010 (2):29-33.
［17］MUHAMMAD T.溶解氧浓度对CuCrZr合金腐蚀行为的影响［D］.北京：华北电力大学,2019.
相似文献/References:
备注/Memo
- 备注/Memo:
-
收稿日期： 2024-03-25
* 基金项目： 国家自然科学基金项目（U22A20164，52074234）；中国石油-西南石油大学创新联合体科技合作项目（2020CX040100）
作者简介： 张智，博士，教授，主要研究方向为油气井工程。
